LG 60PS60 60 in. Plasma HDTV - Answered Questions & Fixed issues

Try a factory reset to it, and check. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

The jack is directly soldered to its main board. If you have all the tools, and soldering skill ; you can replace it. http://electronicshelponline.blogspot.com/

Kindly disconnect back light module & try power on , if fail try change any bulged capacitor ,then your VA output should have 5v, 12, & 24v if not present please change your power supply

Replacing the poser regulator board to a plasma tv [of any brand] is a very skilled work. After replacement, some critical adjustments should be done, and is a skilled work. Contact any experienced service technician or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Even when you don't like this, it must have detected an error. To avoid more damage, it will switch off the power. I think it will be the best you ask a tech to check what is wrong. Perhaps it is still a warranty issue so it won't cost you if you call the shop you bought it.

you need to filter out the local 4G signal this causes many issues with DTV and plasma....regen

Contact the authorized dealer for Philips to get more details. Electro help

Contact the authorized service center for LG. Electro help

There is no external reset button to this TV. You have to enter its service mode option to do this. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

this problem is for bad contac in the flex conector, this can not be repair, you need change the display.

Sorry Jennifer you have a bad panel. Repair cost is prohibitive if it is not under warranty.

How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/. If the blinks continues, and non-stop, the fault should be with its main system control IC, and with the memory IC.

How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/

Visit this site named 'Electro-help' These type of fault to plasma TVs are described in detail there. Almost all plasma TVs will have same structured circuits. You can find which board to your TV is faulty, by referring details from this site. Check this link, and select the site named above. Pull up older posts there.

Unplug the TV from AC mains wall socket. Plug it back after 5 minutes or so. this must make the TV to a hard reset. Try this.

Contact the nearest authorised service center for LG. The digital video processor board has the trouble. It is a very skilled work, need sophisticated testing equipments, and work expereince.

The digital video processor section board should be troubleshooted. Might need replacement. The work is a very skilled one.

Please specify the components you want to connect with your plasma. For computer see THIS link for detail

Hello
Check your HDMI cable.

The HDMI cables don't support HDMI version 1.3, it cause flickers or no screen
display. In this case use the latest cables that support HDMI version 1.3.
Use a high quality cable. Similarly, if you connects this set with coaxial cable, make sure about its quality. Select Monster will be best. The fault is with the cable you have connected with this TV. OK.

Same happens to my lg tv....any update