AOC L32W861 32 in. LCD TV - Answered Questions & Fixed issues
AOC envision series 32 inch LCD model Number L32W861
Fault at its main digital board.
Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
Master reset 0000
Try this to reset your monitor:
1. Press and hold "Menu" and "Channel+" on the TV. (do not use the remote)
2. Using the other hand, press the Power button.
3. A small screen should appear in the top left part of the screen.
4. Using the remote, select "Memory Recall" and Enter.
5. Power off and reboot the TV and Computer.
6. Run channel auto-scan to regain the picture.
Reset button
Try this:
1. Press and hold "Menu" and "Channel+" on the TV. (do not use the remote)
2. Using the other hand, press the Power button.
3. A small screen should appear in the top left part of the screen.
4. Using the remote, select "Memory Recall" and Enter.
5. Power off and reboot the TV and Computer.
6. Run channel auto-scan to regain the picture.
L32W861 Black Screen.
Buy
THIS main board, and replace it. Most of the time, this should fix your no picture, no sound issue.
How do I adjust my screen size
You can do this manually throught he menu and using the volume/channel buttons to toggle to the choices. Go to the video menu and in there you will be able to adjust the display size.
No video
The back light inverter board should be suspected. But, before confirm it, a through checkup should be done. There is a site in internet named "Electro-help". Google for it, pull up older posts. Fault symptoms by balclight inverter board in general, is described there in detail. You can try to get this site by yahoo too.
Sound goes out at random
Hello,
The problem is from the sound chip/IC of your TV. The sound chip is failing/defective and it is giving a sign that it needs to be replaced. It's getting worse that is why it takes up to days..........
The sound chip/ic of your TV needs to be replaced for the sound to remain permanent.
But before that, connect the TV to a DVD player and observe if there is going to be sound. If there is no sound on the TV using a DVD player, or if problem persist, then it means the Sound ic/chip really needs replacement.
Replacing the sound chip requires skill, so I would suggest you allow a repairman help you out. It won't cost you much fixing this problem.
Good luck.
My tv keeps flashing "please
Possible error in the processor section or the drive output section.
The set is not getting the feedback needed to switch on as there are errors that instructs not to proceed.
If you are comfortable with opening the set , please remove after disconnection of the power and check the main board, check the connectors, check for visible damage for an indication or the faultt apppears to be more complicated which requires a good circuit check.
My 32" plasma AOC TV
The dvd has fried the controller of the tv - **** happens. There is nothing you can do - the mainboard of the tv must be replaced. This is a job for a skilled person so take your tv to a repair shop. And junk the dvd player.
Please, please, do not post your phone number and email address on an open site again, you don't know who's looking and it might get you into troubles.
AOC 24G2U all buttons only control the input since this week, can't access the settings menu and the screen will start to switch input by itself?
If the buttons on your AOC 24G2U monitor are no longer functioning as expected, and you can only control the input/source selection, it indicates a possible issue with the monitor's control panel or the firmware. Here are some steps you can try to troubleshoot the problem:
- Power Cycle: Turn off the monitor and unplug it from the power source. Wait for about 1-2 minutes, then plug it back in and power it on again. This can help reset the monitor's internal settings and may restore the functionality of the buttons.
- Button Combination Reset: Some monitors have a button combination or sequence that can reset the settings to their factory defaults. Consult the user manual for your AOC 24G2U monitor or visit the manufacturer's website to find the specific button combination for resetting the monitor's settings. Follow the instructions carefully to perform the reset.
- Firmware Update: Check if there is a firmware update available for your monitor model. Visit the AOC website or contact their customer support to inquire about firmware updates. Updating the monitor's firmware can sometimes resolve issues with the control panel and restore full functionality to the buttons.
- Physical Inspection: Inspect the buttons on the control panel for any signs of physical damage or debris. Sometimes, dirt or debris can interfere with the proper functioning of the buttons. Use a soft, lint-free cloth to gently clean the buttons and the surrounding area.
- Contact AOC Support: If the issue persists after attempting the above steps, it's recommended to contact AOC customer support for further assistance. They can provide specific troubleshooting steps or arrange for repair or replacement if necessary.
Please note that the steps provided are general guidelines and the exact steps or options may vary depending on your specific AOC 24G2U monitor model. Always refer to the user manual or contact the manufacturer's customer support for model-specific instructions.
Not finding what you are looking for?