Sony DVP-SR200P DVD Player - Answered Questions & Fixed issues

0helpful
2answers

In Need of DVD code for Sony DVP-SR200P

Unfortunately the only region code your Sony will play is the one that is printed on the bottom of the unit.
5/8/2020 1:53:18 AM • Sony DVP-SR200P... • Answered on May 08, 2020 • 5,014 views
0helpful
2answers

Unlock region codes

11/7/2019 3:14:15 AM • Sony DVP-SR200P... • Answered on Nov 07, 2019 • 1,757 views
0helpful
2answers

Getting a C 13 70 disc is dirty message only for

Hello, welcome to Fixya!Was this player playing previously? And how long have you been using this player? I suspect the lens of the player. Once the lens of the player becomes weak, it won't play discs any longer.The first thing my mind goes to, is the lens. The lens id responsible for reading/loading data on discs. So if the lens is unable to read the disc, there is no way the player is going to play the disc.To confirm if actually its a laser problem, insert an Audio CD into the player and see if will play. If it plays, then obviously, your laser (lens) is weak. But if it doesn't play Audio CD, then it might still be the laser (lens) or probably, a mechanism problem.Get a lens cleaner, use it to clean the lens. If that doesn't solve the problem, get a screw driver, open the player's cover so that you can gain access to the lens, use a cotton board to clean the surface of the lens. This should clean dust or dirt that might be on the lens.If non of the above solves the problem, then know that you need to replace the laser to a brand new one.To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a professional touch, so if you cannot replace the laser, get it to a repairman to fix it for you.Once this us done, your player will play all DVD discs again.Good luck.
6/4/2018 9:05:03 AM • Sony DVP-SR200P... • Answered on Jun 04, 2018 • 2,599 views
0helpful
1answer

How do i to put the dvd on region free code?

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Unlock procedure and to override the password lock of many popular brand TVs and other devices are given. Search the site by type in this key phrase "How to unlock televisions and DVDs"; in the search box at the top left of the display window, to get gathered related posts.
9/12/2016 1:35:13 PM • Sony DVP-SR200P... • Answered on Sep 12, 2016 • 72 views
0helpful
1answer

How to set up remote control so it will work volume and power on my philips tv the sony player i have is a dvp.sr200p

Why not use the Phillips remote to control the DVD instead of the reverse? The Sony codes are listed below. 20533, 21533, 20864, 21033, 21070, 21431, 21536.
4/25/2016 5:01:39 PM • Sony DVP-SR200P... • Answered on Apr 25, 2016 • 184 views
0helpful
1answer

Need to no how to make my Sony DVD player remote work the volume and power on my Philips TV

Does the remote have a TV setting? In other words, is there a setting on the remote where you can go back and forth between TV, DVD, Cable, etc? If not, you cannot use it for that purpose. If it does, try setting up your remote with one of the following codes. 11454, 11054, 10690.
4/25/2016 4:59:03 PM • Sony DVP-SR200P... • Answered on Apr 25, 2016 • 201 views
0helpful
2answers

My movies are only in black & white

This is a connector/cable problem. Replace the video cable with a new one.
2/11/2016 12:29:55 AM • Sony DVP-SR200P... • Answered on Feb 11, 2016 • 93 views
0helpful
3answers

I need to unlock the DVP-SR200P to play all

Tell that to my DVP-SR200P ¬_¬

I just bought it, It's regoin 4 and it doesn't play other ones.... I just found out!!!!!

MONIQ
11/18/2015 7:32:37 PM • Sony DVP-SR200P... • Answered on Nov 18, 2015 • 5,614 views
0helpful
2answers

My sony dvp sr200p cannot eject the disk inside. i tried all the 4-digit code but i failed.

From www.sony.comUnable to eject a disc.Solutionsp.gifsp.gif

Follow the steps below to troubleshoot this issue.

IMPORTANT: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are available online through the Manuals/Specs/Warranty link on this page.

  1. Ensure the child lock feature is disabled.
  2. Attempt to open the disc tray.
  3. If the issue is not resolved, turn off the DVD player.
  4. Unplug the power cord from the electrical outlet for 30 seconds.
  5. Plug the power cord back into the electrical outlet.
  6. Attempt to open the disc tray.
  7. If the disc tray still does not open, simultaneously press the POWER + STOP + EJECT buttons.
  8. If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons.

    NOTE: This step may not apply to all models.DISC1 is not available on all DVD players.

11/8/2015 12:24:16 AM • Sony DVP-SR200P... • Answered on Nov 08, 2015 • 812 views
0helpful
1answer

My DVD player is saying Playback prohibited by area limitations. What does that mean

You can try the region code hack. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Search the site by keyword "Region code"
7/14/2015 5:22:53 AM • Sony DVP-SR200P... • Answered on Jul 14, 2015 • 1,097 views
0helpful
1answer

I would like to know where the tiny hole in the front of the tray is?

I can't help with a picture of the same unit as you have, perhaps you can post a picture of yours with DVD face removed (there isn't such a hole on the intact unit). so that I can inspect it. Your DVD player may not have such a hole. If you consult your user manual I think it tells to you to take the unit to a Sony service centre, but you could the support section of their website. Meantime I attach a picture of computer DVD player, with the hole inside a white ellipse that I have marked in between the LG logo and the button. It's not very visible, being less than 1 mm in diameter (just wider than a paperclip) 6.May.2014 524afd0e-cd1d-47f4-97f7-25c5fe31de77.jpg
5/6/2014 10:46:14 AM • Sony DVP-SR200P... • Answered on May 06, 2014 • 124 views
0helpful
1answer

Unusable signal

This is a resolution mismatch problem. One of the devices will not accept the resolution of the other. Try another type of connection or try another input.
4/14/2014 12:39:56 AM • Sony DVP-SR200P... • Answered on Apr 14, 2014 • 167 views
0helpful
1answer

TRAY LOCKED HENCE IS RESISTANT TO OPEN

BE VERY VERY CAREFUL WHILE TRYING IT : (1) USE SOME HARD PLASTIC NEEDLE. (2) TRY TO LOCATE A VERY LITTLE WHOLE BENEATH YOUR DVD TRAY. (3) PUSH YOUR NEEDLE IN THAT WHOLE SLOWLY, GRADUALLY INCREASING PRESSURE. (4) IT WILL CAUSE THE TRAY TO OPEN, ONCE IT OPENS A LITTLE, YOU MAY SLOWLY PULL IT TOWARDS YOURSELF AND REMOVE YOUR CD/DVD FROM THERE. (5) REMEMBER TO TURN OFF YOUR PLAYER FROM MAINS BEFORE TRYING. (6) IF YOU FIND YOURSELF UNCOMFORTABLE DOING SO, CALL YOUR CUSTOMER CARE CENTER / SERVICE CENTER. IF WARRANTY HAS EXPIRED, YOU MAY CALL ANY OUTSIDE PROFESSIONAL OR A COMPUTER HARDWARE PROFESSIONAL. BE VERY VERY CAREFUL NOT TO INSERT ANY GOOD CONDUCTOR OBJECTS IN THAT TRAY WHOLE OR YOU MAY GET AN ELECTRIC SHOCK ALSO!!!
3/29/2014 9:05:12 AM • Sony DVP-SR200P... • Answered on Mar 29, 2014 • 56 views
0helpful
1answer

Eject problem

There is a very small access hole on the front panel - use a paper clip - insert it into the hole and push gently and it should eject.
2/12/2014 5:26:43 PM • Sony DVP-SR200P... • Answered on Feb 12, 2014 • 54 views
0helpful
1answer

Tray locked

power down then try to open
11/6/2013 2:50:42 AM • Sony DVP-SR200P... • Answered on Nov 06, 2013 • 46 views
0helpful
1answer

Sony dvp-sr750hp unlock

sony dvp-sr750hp unlocking tray
7/29/2013 7:48:42 AM • Sony DVP-SR200P... • Answered on Jul 29, 2013 • 493 views
0helpful
1answer

Sound

Are all the 3 cable plugs inserted properly (yellow, white, red) or is it a scart lead? You may need to buy a new scart lead ( or 3 wired scart cables) as there could be a problem with the links or just the wires themselves
6/1/2013 6:34:31 PM • Sony DVP-SR200P... • Answered on Jun 01, 2013 • 33 views
0helpful
2answers

Playback prohibited by area limitations - what

you are trying to use a dvd from a different region then the player is set up for the player has to be unlocked to play multiple regional discs
4/4/2013 8:08:26 PM • Sony DVP-SR200P... • Answered on Apr 04, 2013 • 8,147 views
0helpful
2answers

My dvd player says playback prohibited by area

Sounds like it's the wrong region disc. Try a disc that worked before and if it does than there is nothing wrong with your dvd player it is the disc you are trying to play that has the issue.
7/14/2015 4:55:49 AM • Sony DVP-SR200P... • Answered on Jul 14, 2015 • 2,027 views
0helpful
1answer

Why is there no color

If using component video out please make sure that all cables are firmly and securely connected to the player and the TV. -Component = Green/Blue/Red cables or jacks.If using the video out please make sure that the TV color settings are not set to grey or black and white. If everything is connected properly I would recommend to connect the player to another TV to see if the same issue will occur. Also check the color settings on the DVD player under picture mode.Ref: http://www.docs.sony.com/release/DVPSR200P_US_ES.pdf
12/18/2012 4:29:20 AM • Sony DVP-SR200P... • Answered on Dec 18, 2012 • 267 views
Not finding what you are looking for?
Sony DVP-SR200P DVD Player Logo

257 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...