20 Most Recent
Sony DVP-SR200P DVD Player - Page 3 Questions & Answers
I cant get the dvd picture full screen
From your DVD remote control, press display button. select tool box icon and then select custom. Select SCREEN SETUP and look for 4:3 output and select FULL
Sound
Are all the 3 cable plugs inserted properly (yellow, white, red) or is it a scart lead? You may need to buy a new scart lead ( or 3 wired scart cables) as there could be a problem with the links or just the wires themselves
The "L ch" message is
Hi,
To cancel child lock in DVP-SR200P dvd player, press power button to turn unit Off (standby mode) then press Return, Enter and Power buttons on remote.
This will cancel child lock in dvd player.
Hope this info will help you.
Thanks.
Why is there no color
If using component video out please make sure that all cables are firmly and securely connected to the player and the TV. -Component = Green/Blue/Red cables or jacks.If using the video out please make sure that the TV color settings are not set to grey or black and white. If everything is connected properly I would recommend to connect the player to another TV to see if the same issue will occur. Also check the color settings on the DVD player under picture mode.Ref:
http://www.docs.sony.com/release/DVPSR200P_US_ES.pdf
Hi, I need to unlock
Hi,
THere was some problem, with the chat...I was not gettin gyour messages
1.Switch on the player
2; Pop open the CD compartment
3. Enter the following code (using the remote): 2812
4. Highlight the region
5. Change to 9 (for Multi-region) using the 'Enter' button
6. Hit 'Clear' to exit
7. Pop in a DVD and enjoy!
Switch on the player
2; Pop open the CD compartment
3. Enter the following code (using the remote): 2812
4. Highlight the region
5. Change to 9 (for Multi-region) using the 'Enter' button
6. Hit 'Clear' to exit
7. Pop in a DVD and enjoy!
THere was some problem, with the chat...I was not gettin gyour messages
Turn off after while
you will need to remove the cover of the dvd player, then look for the power supply board. if you noticed that have bulged electrolytic capacitors you will need to replaced. it was a leak and will cause of hard to turn on the circuit because of low voltage output from the power supply board.
Buzzing noise
If its doing it when turned off its in the standby power supply inside the unit which runs 7/24 if the unit is plugged to power.
Not finding what you are looking for?