Check the battery: Before attempting to set up your watch, make sure that the battery has not run down. If the battery is dead, you will need to have it replaced by a professional watchmaker or authorized Breitling service center.
Wind the watch: If the battery is not dead, you may need to wind the watch to get it started. Most Breitling watches have a self-winding mechanism, but if it has not been worn for a long time, it may need to be manually wound.
Set the time: Once the watch is running, you can set the time by pulling out the crown (the knob on the side of the watch) and turning it until the hands are set to the correct time. Push the crown back in when the time is set.
Set the date: If your watch has a date function, you can set the date by pulling the crown out to the second position and turning it until the date changes. Push the crown back in when the date is set.
Synchronize the time: If your watch has a chronograph function (stopwatch), you may need to synchronize the time to ensure that it is accurate. You can do this by starting the chronograph and waiting for it to complete a full revolution.
Buy a new one for $15 and get the manual. :>D
This link gives the button functions.
https://www.aliexpress.com/item/32779408249.html
Dawn Soriano. Top right button for 12/24 hour. Probably 'press and hold'.
12/24 HOUR FORMAT SELECTABLE (PRESS C)
Alarm Mode
ALARM MODE: PRESS "B" KEY ONCE TO ENTER TO ALARM MODE, PRESS "C" KEY TO SELECT CHIME/ALARM. PRESS "D" KEY TO FLASH HOUR. PRESS "C" KEY TO ADJUST. WILL FLASH MINUTES. PRESS "C" KEY TO ADJUST MINUTES. PRESS "D" KEY TO SET. PRESS "B" KEY TO RETURN TO MAIN SCREEN WHEN AN ALARM SOUNDS, PRESS THE "B" KEY TO STOP THE ALARM AND START SNOOZE FUNCTION. IT WILL ALARM AGAIN AFTER 5 MINUTES. PRESS THE "C" OR "D" KEY TO STOP THE ALARM. ALARM WILL STOP AUTOMATCALLY AFTER 20 SECONDS ? TO HAVE YOUR WATCH SOUND AT EVERY HOUR, PRESS "B" KEY ONCE. PRESS "C" KEY TILL ALARM BELL APPEARS. TO DISARM, PRESS "C" KEY TILL THE BELL IS BLANK.
https://www.dxl.com/media/content/pdf/98776_instructions.pdfhttps://www.google.com/search?q=smael+dual+time+watch+instructions
..
Removing links from a 97P144 watch band can be a bit tricky, but with the right tools, it can be done. Here is a step-by-step guide on how to remove links from your 97P144 watch band:
Gather the tools: You will need a small screwdriver, a pair of pliers, and a link removal tool (specifically designed for removing links from watch bands).
Locate the link pins: Look at the back of the band and locate the link pins that hold the links together. These will be small, thin pins that run through the links and hold them in place.
Use the screwdriver: Use the small screwdriver to push down on the head of the link pin, and then use the pliers to gently pull the pin out of the link. Be sure to keep a firm grip on the pin as you pull it out, as it can be tricky to remove.
Repeat the process: Repeat this process for each of the link pins that you want to remove.
Use the link removal tool: Use the link removal tool to push the link out of the band.
Reassemble the band: Once you have removed the desired number of links, reassemble the band by pushing the link pins back into place and securing them with the screwdriver.
Be sure to take your time and work carefully, as you don't want to damage the band or the watch itself during the process.
If your Iniglo watch is not lighting up and you are unable to change the date, there may be a problem with the battery or the watch's internal components. Here are some steps you can try to troubleshoot the issue:
Check the battery: Make sure the battery is installed correctly and has a sufficient charge. If the battery is dead or low, try replacing it with a new one.
Clean the contacts: Use a soft cloth to clean the battery contacts and the contact points inside the watch to ensure a good connection.
Check the setting: Make sure the watch's backlight setting is turned on and the brightness is adjusted to a level that allows you to see the display in the current lighting conditions.
Reset the watch: Try resetting the watch by pressing and holding the "reset" button (if your watch have) for a few seconds.
Check for water damage: If the watch has been exposed to water, it could cause damage to the electronic components. If water has entered the watch, it is best to take it to a professional watch repair center for service.
Check if the watch have a warranty: If the watch is still under warranty, you should contact the manufacturer for service or repair.
To turn off the hourly beep on a Mingrui sports watch, you can try the following steps:
Press and hold the "Mode" button until the watch enters the settings menu.
Use the "Adjust" button to navigate to the "Beep" or "Alarm" option.
Press the "Adjust" button to turn off the hourly beep.
Press the "Mode" button to exit the settings menu.
Please note that these steps may vary depending on the specific model of Mingrui sports watch you have. It's recommended to refer to the user manual for your specific watch for detailed instructions.
It's difficult to give an accurate estimate of the value of a specific item without more information and context, such as the condition of the item and any additional features it may have. However, in general, a base metal bezel for a 2018 FMDXGE012IF184 watch is likely to be worth less than one made of precious metal like gold or platinum.
The value of a base metal bezel watch can vary greatly depending on the brand, model, and condition. It could be worth anywhere from a few dollars to a few hundred dollars. It's best to consult with a jeweler or a watch expert to get a more accurate estimate of the value of your specific watch.
Additionally, you can also check on online marketplaces such as eBay or Amazon to get a sense of the price range of similar watches that are being sold.
To change your Armitron WR165 watch from military time (also known as 24-hour time) to 12-hour time, you will need to follow these steps:
Press and hold the "mode" button until the display shows the current time format (either 12H or 24H).
Press the "set" button to toggle between the two time formats.
When the desired time format is displayed, press the "mode" button to exit the setting mode and save the new time format.
If you are having trouble changing the time format on your watch, you may want to consult the user manual for your specific model, as the steps may vary slightly depending on the version of the watch you have. You can also try contacting Armitron customer support for further assistance.
It sounds like you are having an issue with setting the time on your Ott light. Here are a few suggestions that may help you resolve the problem:
Check the owner's manual for your Ott light. It should have instructions on how to set the time and troubleshooting tips for common issues.
Make sure that the light is plugged in and the power is turned on. If the light is not receiving power, the time cannot be set.
Check the batteries in the remote control. If the batteries are low or dead, the remote may not be able to communicate with the light and the time cannot be set.
Make sure that you are pressing the correct button on the remote to set the time. Some Ott lights may use a different button or sequence of buttons to set the time.
If the light is still not responding to the remote control, try resetting the light by unplugging it and then plugging it back in. This may reset the light and allow you to set the time.
If you have tried these steps and are still having trouble setting the time on your Ott light, you may need to contact the manufacturer or a customer service representative for further assistance. They may be able to provide additional troubleshooting tips or repair the light if it is experiencing a hardware issue.
Mine is like those but brand shhors. I change time by holding reset. What concerned me is what are the digits displayed: first comes time, then comes the month and the day in small digits, and then comes 20 and two digits for year which is soon 23. After youre done reset finishes all.
Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.http://world.casio.com/wat/download/en/manual/.
