Bernina Bernette 75 - Answered Questions & Fixed issues
Bernina 730 Can't open top cover !
The problem is that of a stuck piston detent on the pattern selector support that snaps the top cover closed.
- Open the light cover
- Apply pressure with thumbs on the bottom edge of the top cover on both the right and left sides of the cover. The cover should pop up...Too much pressure on the left side, (if this thing is really stuck) and you might break the top cover at the thread tension slot. Be careful here....
- Add a drop of acetone (fingernail polish remover) to the piston detent and work it free by pushing it back and forth. Avoid getting any acetone on the painted surfaces of the machine.
- Continue to work free, repeating with a few drops of acetone, and wipe clean. Don't oil this part. It was a petroleum product combined with a galvanic process (aluminum and steel) that caused the problem in the first place, not to mention age.
- Use DTE Heavy Medium oil rather than a white or clear oil when you lubricate your machine. White oils are unstable and will oxidize (decay) much more quickly. Also avoid 3 in 1 oil and stuff like WD40....very bad....
- Oil 1/2 a drop on those prescribed areas. Too much oil is more harmful than not enough....
- Contact your Bernina dealer for this oil.
Needle holder
do you have a sewing store in your area, I would take it there and ask them to help you. I am sure someone there should do it for free for you. hope it works
Where can I get power cord, foot pedal, and manual?
About 17,700 results (0.94 seconds)
Search Results
www.bernina.com/...Manuals/bernette-manuals/Bernette-Sewing-Machin...
Bernette Sewing Machines Within this section are the Bernette series of sewing machine manuals that are no longer ... bernette 50 / 60 / 70 / 75 Manual (7.4 MB).Missing: power
www.bernina.com/de/.../BERNINA.../bernette.../Manuals/deco340_EN_...
Congratulations on your decision to buy the bernette Deco 340. By owning .... Insert the power supply plug into the wall outlet and turn the power switch on. 1.
www.bernina.com/en-US/Support-US
Out of Print Manuals. Out of ... BERNINA FAQ - Find answers to frequently asked questions. ... Please note: this service can only address SOFTWARE questions.
www.bernina.com/.../BERNINA.../BERNINA.../Manuals/0333017104_2...
You've decided on BERNINA, a reliable choice that will delight you for years to come. For over 100 .... Power cable. ยท .... control the sewing speed by pressing the foot
Bernette 800D seized up
Please don't use WD40 on your sewing machine, WD40 is an alcohol based cleaner and will do the opposite of lubricate. Take your machine to a certified Bernina Repair shop, they will have a look at the timing and lubricate all of your gears. Lubricant will dry out over time, grease turns to putty and oils turn to varnish after several years of non-service. Lint is attracted to moisture, moisture being those key areas of any machine. Lint acts like an oil wick and will draw out your lubricant from key areas. It then begins to attract dust and other nasty things over the years to become grit. Your motor begins to burn out due to stress trying to move all of these clocked gears, cams and shafts. Take your machine in!
I have a Bernina 2000D and it will not sew
If you visit this company:
http://www.sewingmanuals.com/Sewing_Machine_Manuals/Bernina.htm
Sadly you will have to pay for an instruction manual, leads to a PayPal account.
Please rate this thanks,
Needle sticks
Bent needle and dirty machine or machine in need of a proper COA (tuneup) are my first thoughts.
I have a Bernette 334d that I replaced a broken
Hi
If the timing is out, to be honest, you need to get it done by someone who is experienced. It is not a simple job - there are many steps in the process and it must be done very accurately in order for it to function correctly. Timing a sewing machine is childs play in comparison.
Cheers
Not finding what you are looking for?