20 Most Recent Euro-Pro Fast and Easy 420 Mechanical Sewing Machine - Page 4 Questions & Answers

I found a manual for the Euro-Pro Select X 762XH at ManualsLib, https://www.manualslib.com/manual/2223389/Euro-Pro-Select-762xh.html#manual . Click on the green Download button and solve the Captcha if you want the PDF of the file. There may be another model in the Euro-Pro Select X line. Try to find a complete model number on the plate/label with the serial number on the bottom, back or side of the sewing machine. I hope this helps. Cindy Wells

It seems to be a little known machine! https://www.google.com/search?q=Euro-Pro+100-547H

You can try contacting Euro-Pro directly to see if they have a service manual available for the Omega Euro-Pro Serger model 434D. Alternatively, you can try searching for the manual online through a search engine or online manual database. There are also online forums and communities dedicated to sewing and serging that may have resources or advice on how to troubleshoot or repair your machine.

Here is the manual which includes threading.

Euro-Pro 380 Instruction Manual - ManualsLib

https://www.manualslib.com > ... > 380 View and Download Euro-Pro 380 instruction manual online. 380 sewing machine pdf manual download. Also for: Ep382. ..

Unfortunately there is no service manual available. Sounds like a switch issue. https://www.google.com/search?q=repair+manual+for+Euro-Pro+Stitch+Art+model+70-6100 ..

There is no button for a back stich where would it be

There is a manual for the 385 here https://www.manualslib.com/manual/1075400/Euro-Pro-385x.html $14 to buy one here https://www.repairloader.com/manual.php/5b500f1#.YSkCr45KiUk $12.88 here https://www.ifixmachines.com/index.php?option=com_hikashop&ctrl=product&task=show&cid=2672&name=euro-pro-shark-394xw-manua&Itemid=126&category_pathway=1598 Click the Videos tab and the images tab https://www.google.com/search?q=Euro+Pro+394XW+manual ..

You can take to near Sewing machine an related repair shop an fix it within minutes...

yes, they all need a bobbin carrier. Available here https://a1sewingmachine.com/euro+pro-bobbin-cases.htm ..

sad to tell you but that happens more than any one likes EBAy is infamous for that too next time try your local repair shop

-Try at reliable parts or Amazon. They might have it. Good Luck/Sew a lot Mai Lor

Contact Euro-Pro directly to inquire about downloading the manual.

Try this link: https://www.google.com/search?q=user+manual+of+EURO-PRO+SEWING+MACHINE.+Model:+Shark+Model+%23:+7132+L+Serial+%23:+00022345&source=lmns&bih=625&biw=1366&hl=en&sa=X&ved=2ahUKEwjx_PTfsNnuAhW2BLcAHVjUCpAQ_AUoAHoECAEQAA

ask GOOGLE OR EURO-PRO TECH SUPPORT

https://www.manualslib.com/products/Shark-7132l-349181.html https://usermanual.wiki/Shark/Shark7132LUsersManual220561.889069163

many people used a thread stand like this but if you want a original spool pin here are 2 links to check and see if they can help you http://www.sewingpartsonline.com/ ultimatesewingandvac com

Wd40 to loosen up!

Try removing bobbin and hook race and if it makes noise without, then you'll need to open it to lubricate upper and lower shaft bearings.


If noise goes away with hook removed be sure to lubricate per manual. Use a good synthetic machine lubricant such as gun (firearm) oil.

See link for operators manual

http://diplo-best.com/314.php?k=977b3b8eab3039c470c4ebb0c8af9c02&ID=815028&q=EURO-PRO%208135H

https://www.youtube.com/watch?v=pANycD90wQg

The feed dogs might be lowered, or the stitch length might be set to zero, or the presser foot tension might be very light.byCheck the feed dog lever first.It is at the back near the free arm. If it is ok, test the feed dogs by setting the stitch length to maximum on straight stitch, then, with the presser foot raised and no material or top thread in the machine rotate the hand wheel towards you and watch the feed dogs. They should move up, then towards you then down then back in cycles. If they don't move, and the feed dogs are not lowered, something is broken https://www.manualslib.com/manual/939695/Euro-Pro-9130c.html?page=6#manual