Top 20 Euro-Pro 534DX Mechanical Sewing Machine Questions & Answers

here is a link for a manual Euro Pro 534 DX Instruction Manual

If you go to the Babylock USA website, locate the Accessories for your particular Babylock model, and there's usually a .pdf file you can download, or instructions on screen for the different accessories.

have you tried to contact babylock about the instructions for the accessory feet?

here is a link for a manual, but it's not free, how to change needle should be in it.http://www.sewusa.com/Sewing_Machine_Manuals/Euro_Pro_Sewing_Machines/Euro_Pro_543DX_Instruction_Manual.htm

Can you find the motor and belt? If so check to see if the belt is broken or worn. Don't touch it or remove it... if you do you could end up throwing your machine out of time. (did that once myself) If you see the belt is broken. Take it in to have it cleaned, serviced and the belt replaced.

sewingpartsonline.comsewusa.com

try a sewing machine shop first, they should have some

You can puchase a black and white paper copy of the User's Manual for $10 US plus shipping from the SEWUSA.COM website at the following link:

http://www.sewusa.com/Sewing_Machine_Manuals/Euro_Pro_Sewing_Machines.htm


And here is the direct link to the online ordering page for the EURO-PRO 534DX Manual:


http://www.sewusa.com/Sewing_Machine_Manuals/Euro_Pro_Sewing_Machines/Euro_Pro_543DX_Instruction_Manual.htm



Just use your mouse to click on the links, which are the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information and items at the website indicated.

If you have a PAYPAL account, you can purchase the manual and complete the transaction directly online. Otherwise you will have to complete the MAIL ORDER instructions which are provided on that same page.

Good luck, I hope this was helpful.

Joe.

there are two little screws that you turn counter clockwise and the needle should then be easily pulled straight down. If you have problems take it to dealer for support.

Please rate my solution.

always leave a long thread tail of 3-6 inches pulled behind the machine

try here for your model or something close
http://www.sewingmanuals.com/

homeappliance.manualsonline.com has a free downloadable operation manual

If you have your manual for this machine, look on pages 13-16, and check the troubleshooting guide on pg 20. Both explain quite clearly in pictures and words, with suggestions on what starting tensions to use for your project, and how to fine-tune your machine for the best outcome for your fabric..

If you don't have a manual, try this: set all four tensions to four, grab some fabric scraps similar in weight to what you're trying to sew, and test. Serge about 3 inches, check the front and back. If there are not two nice straight rows of what looks like straight stitching clearly placed away from the cut edge, then raise the dial on tensions 1 and two slightly and test until you find the correct setting. BE SURE TO WRITE IT DOWN as a calibrated starting tension for your machine. If the serger track is loose on top and there are not clearly defined, uniform loops on the cut edge, where the upper looper (tension 3) and the lower looper (tension four) threads meet AT the cut edge, then you'll need to loosen tension 3 or tighten tension four, or both.

I've scanned my manual and I'm trying to upload it tonight - it clearly explains, with illustrations, just how to fix the issue. I strongly recommend any time you start a new project, save some scraps of fabric to set your tensions with. I always do this, and I get great results. Let me know if you need more info.

Try setting the differential feed to it's lowest setting.

Test with scraps of what you will actually be stitching.

what issue?

thred keeps breaking

The following link has a manual for your machine. It's $10 plus shipping.

http://www.sewusa.com/Sewing_Machine_Manuals/Euro_Pro_Sewing_Machines/Euro_Pro_543DX_Instruction_Manual.htm

I hope this helps you!

Saludos
Comunicate con la compa?ia de Euro Pro ellos pueden ayudarte, ahora bien debes de revisar las agujas, mi maquina hacia lo mismo que la tuya y simplemente era una cambio de agujas, tambien puedes revisar las cuchillas y la puntada o tension que este muy apretada, si despues de revisar todo esto no se resuelve pues comunicate con la compa?ia 1 800 361 4639, ellos te ayudaran, estas maquinas son buenisimas y es una lastima que quizas por una tonteria que se puede resolver salgas de ella. nada es perfecto en la vida ni nostros jajaja mas no nos hechamos al zafacon simplemente por la primera enfermedad que nos de amiguita, cuidate

You can get the manual here. As for the power cord I would call your local sewing machine distributor.

http://homeappliance.manualsonline.com/manuals/mfg/europro/101548.html

Good Luck