20 Most Recent Janome MyLock 204D Serger NEW MyLock 204D Serger - Page 3 Questions & Answers

0helpful
1answer
0helpful
1answer

I have 3 intertwined rings, and one is marked P.D.

This is all we can get from your question, guessing jewellery? https://www.google.com/search?q=3+intertwined+rings%2C+and+one+is+marked+P.D. Small pd is Palladium karat stamp. Are you anywhere near Los Angeles? https://www.google.com/search?q=p+d+jewelry+los+angeles Or PD Jewelry https://www.google.com/search?q=P.D.+jewelry+mark ..
3/31/2022 9:04:54 PM • Crafts & Hobbies • Answered on Mar 31, 2022
0helpful
1answer

Baby Blanket? 41x33. No kit or instruction. Pattern looks kinda like a garden with bees? lady bugs?

Is this a baby blanket that you need to piece together? If so post a picture and maybe I can help. But otherwise I am not sure what kind of help you are asking for.
3/9/2022 1:55:20 PM • Crafts & Hobbies • Answered on Mar 09, 2022
tip

Generic, All Around Useful Painting Tips...

When faced with an expensive Paintbrush with dried paint, don't toss it, Save It...
  • Soak it overnight - Starting out with very warm Vinegar.
Now so it doesn't happen again...
  • Clean well, Place it into proper sized Ziplock Bag & then put into a Pringles, or Coffee can, Then cap it with the plastic Lid.
When storing a partially used can of paint, instead of just putting the lid on it,
  • place a sheet of plastic sheeting like Saran Wrap over the top, then press the lid on.
Instead of using the edge of the can to remove excess paint,
  • find a large thick Rubber Band, or Tie a wire or Twine over the top and bottom, exposing it over the middle of the opened can. Now just use that to remove excess paint & it will fall directly into middle of can and keeps can clean.
If your painted project appears a little rough after painting...
  • Don't use sandpaper or steel wool to remove roughness, that will leave scratch marks, even if gone over lightly, instead use Brown Paper Bag.
If going to apply new coat or 1st coat over metal,
  • wipe down really well with Vinegar. This will help keep paint from bubbling, chipping, blistering or peeling away.
To keep paint brush marks from being noticeable, especially on furniture or cabinetry, or Doors,
  • Use a product called Flotrol. This will eliminate streak and brush marks.
And one more tip When needing to know what type of paint is on your project that you want to repaint...
  • Pour some Vinegar on a cotton ball, then rub on the paint. If cotton ball has paint on it, it is Latex, Not Oil based.
Happy Painting
on Dec 20, 2021 • Crafts & Hobbies
0helpful
5answers

I got a pencil stuck in my hot glue gun. I was trying to push out the rest of the glue out and the pencil broke and now it's stuck. How do I take it Out plz help!!!

Heat the glue up an remove tube glue from injecter then take a paper clip an push pencil out
12/19/2021 6:28:32 AM • Crafts & Hobbies • Answered on Dec 19, 2021
0helpful
2answers

Knight 82 kiln. Where can I get a manual?

Contact Knight directly to inquire.
12/15/2021 1:54:21 PM • Crafts & Hobbies • Answered on Dec 15, 2021
0helpful
3answers

Where to buy performax planer blades for model 90230

try a quality tool shop or saw /tool sharpener shop most planer blades are generic and fit a range of planers the only thing that varies on some is the method of attaching the blades take an old one as a sample
12/15/2021 1:52:48 PM • Crafts & Hobbies • Answered on Dec 15, 2021
0helpful
1answer
0helpful
1answer

I have several 4 inch Luminara candles that no longer light, is there a solution to this problem?

If your Luminara candles dont light try reseting the timer. To reset the timer, push the power button to "OFF" setting and then push button two times at the desired start time. Candle may be used with Luminara remote control. When the Luminara candle is switched to the ON position, you are able to turn the candle OFF/ON with the Remote.
11/28/2021 10:29:39 AM • Crafts & Hobbies • Answered on Nov 28, 2021
0helpful
3answers

Blades for 6" planer jointer naerok

The jointer planer knives is most helpful for woodworking . If you want blades for jointer planer machine Refer Or Contact below Link : https://www.woodfordtooling.com/planer-blades-by-machine-model/jet-jointer-knives.html The Woodfordtooling is online shop for all types blades planer blades , tersa knives , bandsaw blades and other woodworking tools at UK And all over world

67c8b67c-54a8-4542-93b9-6fa812038141.jpg


jet_jwp-12_planerjointer_blades_knives_-_1_pair-kiyslc0pahvoimvxoiboebyy-1-2.jpg
11/27/2021 8:53:00 AM • Crafts & Hobbies • Answered on Nov 27, 2021
0helpful
1answer

Cricut machine. Why isn't it cutting the design properly?

Try adjusting the settings like the speed, forces and passes. Also adjust the roller finder if it goes out of the alignment of the paper you cut if that is the case.
11/21/2021 1:06:03 PM • Crafts & Hobbies • Answered on Nov 21, 2021
0helpful
2answers

Have a hallmark millennium express ornament with moving trains not running can it be repaired

I did come across this info on www.hallmark.com the other day. For exchanges or refunds on defective Keepsake Ornaments, return the product to the place of purchase or any Hallmark Gold Crown store. This includes any current years UL-listed ornament, those that plug in to your light string. TIP: Illumination ornaments are not Keepsake ornaments and they do not have a warranty. Do not send Illumination ornaments in for a replacement or refund, they will not be returned to you if you do. If so, the ornaments may not operate properly. This is NOT a defect. Too many special feature ornaments on a light string can cause lights to dim and/or ornaments to function slowly or not at all. When multiple special feature ornaments are plugged into a single light string and one or more of the ornaments and/or light string does not perform as desired, remove special feature ornaments one at a time until the desired functionality returns. Hallmark Keepsake UL-Listed Ornaments, those that plug in to your light string, have a 3-year warranty against manufacturer's defects. If your non-working ornament was purchased from a Hallmark retailer and it is dated for these years, 2005, 2006, and 2007, please mail it to: Hallmark Consumer Care Fulfillment Center Mail Drop #216 P.O. Box 419034 Kansas City, MO 64141-6034 The above addresses do not have replacements for 2008 UL-Listed ornaments. All 2008 ornaments will need to be returned to the place of purchase for exchange or refund. Pack your ornament carefully. Write your name and address clearly on the outside of the package. Enclose a detailed letter with your name, address ( must be a valid street address, no PO Box, APO/FPO or non-continental US) and phone number and an explanation of the problem you're experiencing. You should insure your shipment so you can be reimbursed by the shipper in case of loss or damage. If we no longer have a replacement ornament we will request a Courtesy Certificate for the retail value of your UL-listed ornament and the ornament will be returned to you.
10/29/2021 3:31:18 AM • Crafts & Hobbies • Answered on Oct 29, 2021
0helpful
1answer

Lionel power transformer lights, whistles work but trains won't move

You will need to first put a meter on the leads of the transformer an see if it is putting out the proper amount of voltage and amperage. The output of each will be listed on the back of the transformer.....ex voltage output will be 12v output. If you eliminate that then you have to go the the track and make sure all of the pieces of track are connected properly. If the current through the track is disrupted then you will not be able to move the train. If this is an older set then cleaning the tracks may help this.
10/28/2021 3:14:48 PM • Crafts & Hobbies • Answered on Oct 28, 2021
0helpful
1answer

Why beeswax candles are so good?

Paraffin burns quickly without a trace, while a wax product melts slowly, practically without dripping and sometimes making crackling sounds. Beeswax pillar candles have a light honey aroma, while paraffin is odorless. The wax is cut easily and effortlessly, the cut is smooth and does not crumble. Paraffin is a solid material, and from such an effect it simply crumbles. If you do not use a wax candle for a long time, it becomes covered with a white coating. At the same time, paraffin, at any time and storage conditions, externally remains unchanged. If you hold the glass over a paraffin candle flame, noticeable soot will immediately form on it. The wax either does not give off soot, or it can only lead to a subtle darkening of the glass.
8/12/2021 7:56:39 AM • Crafts & Hobbies • Answered on Aug 12, 2021
0helpful
1answer

I need gear bushings for performax thickness planer

Try the planer parts outlets. You will need the model number, a make and description doesn't work. https://www.google.com/search?q=performax+thickness+planer+replacement+parts ..
7/12/2021 7:47:35 PM • Crafts & Hobbies • Answered on Jul 12, 2021
0helpful
3answers

What kinds of things can I find in a magic store?

Magic stores sell novelties and items for practical jokes, as well as tools for performing magic tricks.
7/11/2021 4:25:20 PM • Crafts & Hobbies • Answered on Jul 11, 2021
0helpful
1answer

What are the best candles to make for gifts?

What an odd question. It is a matter of personal taste.
6/7/2021 10:00:19 AM • Crafts & Hobbies • Answered on Jun 07, 2021
0helpful
1answer

Do I really need an expensive metal sawhorses?

Plastic saw-horses are great if you need lightweight and portable tools, easy to carry and store. Most of my friends made their first saw-horses themselves. And when homemade wooden ones come to the end of their life they have upgraded to better unit. Click to see detailed review Best Saw Horses 2021
5/6/2021 10:11:44 AM • Crafts & Hobbies • Answered on May 06, 2021
0helpful
1answer

How do I make a fpdc?

https://www.google.com/search?q=How+do+I+make+a+fpdc%3F&bih=625&biw=1366&hl=en&ei=LneWYJHeOoeGyAPorL-IBQ&oq=How+do+I+make+a+fpdc%3F&gs_lcp=Cgdnd3Mtd2l6EAMyAggAMgYIABAWEB4yBggAEBYQHjIGCAAQFhAeUNbpAljW6QJgtu4CaABwAngAgAGAA4gB7QSSAQUyLTEuMZgBAKABAqABAaoBB2d3cy13aXrAAQE&sclient=gws-wiz&ved=0ahUKEwiRreHg_rnwAhUHA3IKHWjWD1EQ4dUDCA4&uact=5..
4/30/2021 7:51:10 PM • Crafts & Hobbies • Answered on Apr 30, 2021
Not finding what you are looking for?
Janome MyLock 204D Serger NEW MyLock 204D Serger Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Janome Crafts & Hobbies Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66977 Answers

Carolyn Rogers

Level 2 Expert

159 Answers

Are you a Janome Craft and Hobby Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Janome Crafts & Hobbies

  • Janome Crafts & Hobbies

Most Popular Question

loose stitch right needle thread serger

  • Crafts & Hobbies
Loading...