Top 20
Janome Harmony 2039 Mechanical Sewing Machine Questions & Answers
I have a harmony 2039
Are you threading the bobbin in correctly? the right size thread and needle for the fabric?
How do I use the overlocking foot
Please consult your manual it has all your information if you don't have it please us your search engine on your computer put in model + name+ number + manual + free
New home Janome 2039 sewing machine
if these suggestions don't help then the machine needs to be checked for a timing problemSkipped stitches
1. The needle is not inserted correctly
Remove needle & reinsert needle( flat side towards the back of machine)
2. The needle is damaged
replace with new needle
3. The wrong size needle is being used
Choose a needle to suit the thread & fabric
4. The foot not attached correctly
Check & attach correctly
I need to know
Ask your local Janome Dealer.....take the old one out as a sample, it is a bayonet fitting .....undoes anticlockwise
What is pressure foot on
This is the foot that comes down and holds the fabric layers under the needle.
There will be a pressure foot lever to raise and lower the pressure foot at the back of the sewing area, it usually operates vertically, although some makes have a lever that works horizontally.
The pressure foot needs to be lowered BEFORE you start stitching as it activates the top tension and also helps with the stitch formation by holding the fabric firmly as the needle moves up and down.
You can read some general sewing machine info at
www.sewing.about.com too.
Not finding what you are looking for?