20 Most Recent Janome 4623 Mechanical Sewing Machine - Page 4 Questions & Answers

Here are the steps to sew a buttonhole on the Janome New Home My Excel 18W/MW3018 sewing machine:

1. Attach the buttonhole foot to the machine.
2. Place the button in the back of the buttonhole foot and adjust the foot so that the button fits snugly.
3. Select the buttonhole stitch on the machine. It may be a buttonhole symbol or a number corresponding to the buttonhole stitch.
4. Set the stitch length to the desired length for the buttonhole. The machine may have preset lengths or you can adjust it manually.
5. Place the fabric under the foot and lower the foot.
6. Sew the first side of the buttonhole. Stop the machine when it reaches the end of the buttonhole.
7. Sew the second side of the buttonhole, stopping at the end.
8. Use a seam ripper or scissors to open the buttonhole carefully.
9. Remove the fabric from the machine and trim any loose threads.

Make sure to practice on a scrap piece of fabric before sewing the buttonhole on your project.

If you have already cleaned and oiled the bobbin case and the feed teeth are going up and down freely, the next thing to check is the presser foot. Make sure it is properly attached and the screw holding it in place is tightened. Also, check that the pressure on the presser foot is set correctly for the thickness of the fabric you are sewing. If the pressure is too low, the fabric may not feed through properly. If the presser foot is properly attached and the pressure is set correctly, you can also check the tension on the upper thread. Make sure it is threaded correctly through the machine and the tension is set to the appropriate level for the fabric you are sewing. If none of these solutions work, there may be an issue with the machine's timing or the feed mechanism itself. In this case, it may be best to take the machine to a professional for servicing.

For some reason, your machine thinks that there is something in the way, and by "lo", I'm guessing it is in the bobbin assembly. Try taking out the bobbin and the bobbin case, and see if there is anything that looks bent or scratched or isn't moving correctly. Your machine is sensing something and locking up to prevent further damage. You might want to also use some canned air to blow out any fuzz or loose threads underneath. Some of the newer computerized machines can be really particular, and the slightest bit of fuzz can throw it out of whack.

Hm, since it involves the LCD screen, it could be a computer component. Could be expensive, but the only way to know is to contact service.

Question edited for clarity, correct name of the maker. Question moved from Computers category https://www.janome.com/support/manuals/ https://www.google.com/search?q=janome+S7702+manual ..

1. Check the thread tension: Make sure the upper thread tension is set correctly for the type of fabric and thread you are using. If the tension is too tight, it can cause the thread to break.
2. Check the thread path: Make sure the thread is correctly threaded through the machine and there are no tangles or knots in the thread path.
3. Check the bobbin tension: Make sure the bobbin tension is set correctly. If the bobbin tension is too tight or too loose, it can cause thread breakage.
4. Use the correct needle: Make sure you are using the correct size and type of needle for the fabric and thread you are using. Using a damaged or bent needle can also cause thread breakage.
5. Slow down your stitching speed: If you are stitching too quickly, it can cause the thread to break. Try reducing your stitching speed to see if this helps.
6. Use high-quality thread: Make sure you are using high-quality thread that is suitable for your project. Poor-quality thread can be more prone to breakage.

1. Check the thread: Make sure you are using a good quality thread that is appropriate for the type of fabric you are sewing. Poor quality thread or thread that is not suitable for the fabric can cause shredding and breaking.
2. Check the needle: Make sure you are using the correct size and type of needle for the fabric you are sewing. A bent or damaged needle can also cause thread shredding and breaking.
3. Check the tension: Check the upper thread tension to make sure it is set correctly for the type of fabric you are sewing. If the tension is too tight, it can cause the thread to shred or break.
4. Check the threading: Make sure the upper thread is threaded correctly and that there are no tangles or knots in the thread path.
5. Check the presser foot: Make sure the presser foot is properly installed and that the fabric is being held firmly in place while you sew.
6. Check the machine settings: Double-check that the machine is set to the correct stitch length, stitch width, and other settings for the type of fabric you are sewing.

If you have tried these steps and are still experiencing issues, you may want to consult with the technician who serviced your machine

It is an Elna, not an Elnita, so I edited the question. https://www.google.com/search?q=elna+130+manual First manual is foreign

Elna 130 user manual (31 pages)

https://www.manuals.ca > Sewing machines > Elna User manual. View the manual for the Elna 130 here, for free. This manual comes under the category Sewing machines and has been rated by 1 people with an ...

eXplore 130 - elna canada

https://canada.elna.com > product > explore-130 The intuitive Elna 130 sewing machine is designed with the beginner sewist in mind: explore and create sewing ... Extra-high presser foot lift, Manual.

• eXplore 130 - Elna - USA

  https://new.elna.com > models > explore > 130-2 Mar 25, 2022 - Foot pressure adjustment, Manual ; Extra-high presser foot lift, Two manual positions ; Speed control slider, x ; Information messages, x.

Instruction Manual, Elna 130 - Sewing Parts Online

https://www.sewingpartsonline.com > Elna Parts > 130 Elna Model 130 Sewing Machine Instruction Manual, 24 Pages. The physical copy of the instruction manual is a soft cover printed photocopy.*Also works. US$14.99

• Elna 130 Sewing Machine Parts / SewingPartsOnline.com

  https://www.sewingpartsonline.com > ... > Elna Parts Shop our extensive selection of Elna 130 parts & accessories! Quick delivery. 90-day returns. Free shipping over $49. ... Instruction Manual, Elna 130.

If your Janome Jem Platinum sewing machine is displaying an "CO" error code, it means that the machine's needle bar is obstructed and cannot move up and down properly. To resolve this issue, you can try the following steps:

1. Turn off the machine and unplug it from the power source.
2. Open the needle plate and inspect the area around the needle bar to see if there is any thread, fabric, or other material

It sounds like the issue you're encountering may be related to the way you are trying to transfer your embroidery files to your Janome 500e sewing machine. To transfer files using a printer cable type direct, you would typically need to use a specific software or driver to communicate between the computer and the machine. If you are not able to transfer files in this manner, it might be necessary to check with the manufacturer or vendor of the cable to see if they can provide assistance or additional information. In the meantime, it seems that you have found a workaround by transferring your files to a USB stick, which you can then use to transfer the files directly to the machine. This is a common method for transferring files to many types of sewing machines. If you continue to have trouble transferring files using a printer cable type direct, you may want to consider reaching out to Janome's customer support for further assistance.

Error codes 7 and 4 on a Janome 770 QCP indicate a problem with the needle bar and/or threading mechanism. Try checking the needle bar and ensuring it is properly positioned and tightened. If the needle bar is not in the correct position, it can cause the needle to be out of center. Additionally, make sure the thread is properly threaded through the machine, including the take-up lever, needle, and thread guides. If the issue persists, you may need to consult a professional

The Janome HC1200 is the HobbyCraft version of the Janome 219S. This machine uses a daring plate to cover the feed dogs. This was included in the original accessory set for the machine. See the picture of the standard accessories here: https://www.manualslib.com/manual/1870252/Janome-219s.html?page=5#manual . https://www.manualslib.com/manual/1870252/Janome-219s.html?page=16#manual shows putting on the darning plate. If you do not have the darning plate, check with a sewing machine shop. https://coulingsewingmachines.co.uk/janome-darning-feed-cover-plate-735801008-fits-most-basic-models/ is an online source. I hope this helps. Cindy Wells

this hap[pens to all of us eventually. place the bottom where it needs to be and the long screws and short screws become apparent as you attempt to put them in.. short screws are too short for certain holes etc..

Perhaps this will assist. There is a suggestion you may not have held down the reverse stitch button for the first 3 or four stitches but I can't make sense of that. https://www.facebook.com/karen.m.sewing/videos/how-to-fix-the-backstitch-on-many-later-model-janomes-and-kenmores/125022392782746/

Question edited to add Make and full name. Category moved from Cars and Trucks to Janome. Yes it does. $30 here https://www.sewingpartsonline.com/janome-my-excel-23l-sewing-machine-parts.aspx?index=1 Videos here https://www.google.com/search?q=Excel+23X+walking+foot ..

Search for: Make Model manual

Question edited for clarity. Question moved from Computers to Janome. There seems to be different versions, perhaps country versions USA and Australia. Some have 'New Home', some don't. There is a manual in the link. https://www.google.com/search?q=JANOME+NEW+HOME+MY+EXCEL+18W-MW3018 ..

Unfortunately that is the serial number not the model number. The videos in the link might help, but all the parts schematics work on Model Numbers. https://www.google.com/search?q=janome+upper+tensioner+replacement+parts ..