20 Most Recent
Janome L-344 Mechanical Sewing Machine - Page 6 Questions & Answers
How do I reset my Janome Jem Platinum after getting a co error code? It won't sew at all currently.
If your Janome Jem Platinum sewing machine is displaying an "CO" error code, it means that the machine's needle bar is obstructed and cannot move up and down properly. To resolve this issue, you can try the following steps:
- Turn off the machine and unplug it from the power source.
- Open the needle plate and inspect the area around the needle bar to see if there is any thread, fabric, or other material
I have a Janome 500e.When I use my printer cable type direct there is no embroidery file and nothing is transferred only if i use a usb stick .
It sounds like the issue you're encountering may be related to the way you are trying to transfer your embroidery files to your Janome 500e sewing machine.
To transfer files using a printer cable type direct, you would typically need to use a specific software or driver to communicate between the computer and the machine. If you are not able to transfer files in this manner, it might be necessary to check with the manufacturer or vendor of the cable to see if they can provide assistance or additional information.
In the meantime, it seems that you have found a workaround by transferring your files to a USB stick, which you can then use to transfer the files directly to the machine. This is a common method for transferring files to many types of sewing machines.
If you continue to have trouble transferring files using a printer cable type direct, you may want to consider reaching out to Janome's customer support for further assistance.
Not finding what you are looking for?