Necchi 6015 Mechanical Sewing Machine - Answered Questions & Fixed issues


Increase the upper thread tension, or loosen the bobbin tension to balance them. Put in a new needle too. Check that the needle is in correctly.

Necchi 6015... | Answered on Nov 19, 2014 | 72 views


the presser foot or what ever foot your sewing with does not feed the
fabric,, the feed dogs in the needle plate are what moves the fabric
to be sewed, the feet only hold the fabric against feed dog so the
machine can use the needle to sew the fabric.
if the fabric is not moving then the feed dogs have to be checked
can you see the feed dogs in the needle plate area are the up or
down?
do you have a manual for the machine?
a manual help to know where the feed dog lever is, I'm sending
you a link for a manual for the machine, so you can look for the feed
dog lever, if the feed dogs are up then there is something wrong
with the feed dogs & they need to be checked.
but if the feed dogs are down then look in the manual & see where
the feed dog lever is & put it in the up position & see if that brings
the feed dogs up to the sewing position, if the feed dogs do not
come up then the feed dogs need to be checked.

http://www.sewingpartsonline.com/instruction-manual-necchi-6015.aspx

Necchi 6015... | Answered on May 28, 2014 | 3,594 views


check youtube for video's on winding a bobbin
or for a manual check these sites
sewingpartsonline.com
sew4less.com
sewusa.com
sewvacdoctor.com

Necchi 6015... | Answered on Apr 17, 2012 | 46 views


The whinning noise could be a slipping belt which you need to check, you should be able to take the side off to see

Necchi 6015... | Answered on Sep 14, 2011 | 86 views


Reduce the bobbin thread tension. It is done by loosening the little screw on the bobbin case. It is a sensitive adjustment so turn about 1/8 of a turn at a time.

Necchi 6015... | Answered on Mar 31, 2011 | 159 views


Hello jone...... please rewrite your question one more time starting fresh with the brand, model number and exactly what is wrong with your machine. We truly do want to help you but we need all of that info. in one place. Thanks. Joe

Necchi 6015... | Answered on Dec 24, 2010 | 77 views


Go to http://allynint.com/
Get the phone number off the web and call them, they have what you need.
If you speak to Dorothy, or Bob Coen, tell them Merry Christmas from Ellen in Arizona. Merry Christmas to you too,

Necchi 6015... | Answered on Dec 24, 2010 | 156 views


Do a goggle search to find a Sew & Vac near you.

Necchi 6015... | Answered on Dec 18, 2010 | 68 views


I find that re-threading both top and bottom threads fixes the problem. Sometimes the thread has not gone through the tension springs properly. try a new needle too.

Necchi 6015... | Answered on Dec 08, 2010 | 260 views


I have 2 necchi sewing machines & have the following feet
1.all purpose foot
2.zipper foot
3.buttonhole foot

sewingpartsonline.com has necchi parts

Necchi 6015... | Answered on Dec 02, 2010 | 86 views


have you cleaned under the needle plate
change the needle
make sure the thread has not come off the thread take up lever
some thread & needle don't work togeather--try this
Cut 6-8 inch piece of thread of the spool you are going to use for your project
Take the needle you are going to use for the project
& insert the thread thru the eye of the needle
& lift one end of the thread to a 45 degree angle
& if the needle is the right size for the thread it will slide down the thread
But if the needle hangs on the thread you need one size larger needle for the thread

Necchi 6015... | Answered on Nov 21, 2010 | 122 views


If the machine is old, I would get a new one. It shouldn't move and the fact that you can depress it easily sounds like it's defective.

Necchi 6015... | Answered on Aug 23, 2010 | 27 views


If you have a zig-zag stitch on your machine, you have the capability of using a twin needle when using a STRAIGHT stitch. The width between the needles is the same as the width for the z-z stitch but you won't be using that stitch. Only the straight stitch.

Necchi 6015... | Answered on Aug 24, 2010 | 186 views


Hi. If the bobbin thread is coming up on top, then the upper tension is too tight. Try loosening it.

Hi. The best way to adjust your tension is to use good-quality thread, a size 12 needle, and different color threads in the bobbin and on top. That way, it's easier to see which thread is loose. Sew a few inches, check, and adjust (make sure the pressure foot is DOWN). Stitch a few more inches, recheck, and adjust some more. Just move the adjustment knob a little bit each time.

You might also want to use a bit of unwaxed dental floss and floss the tension disks. That helps get rid of any old lint and pieces of thread that build up in there.

As a last resort, you might need to adjust your bobbin tension. There is a very small screw on the bobbin case that tightens/loosens the spring/lever. If you need to adjust it, only move the screw a tiny bit. But, like I said, this is only a last resort--almost all adjustments can be done by adjusting the upper tension.

Hope this helps!

Robbie

Necchi 6015... | Answered on Aug 12, 2010 | 271 views


i was able to find one at www.ifixmachines.com

Necchi 6015... | Answered on Feb 15, 2010 | 55 views


Email me for timing instructions drivewithken@blueyonder.co.uk

Necchi 6015... | Answered on Jan 01, 2010 | 184 views


nake sure the machine is threaded proiperly with a good mercerised thread no thicker than a number 40, make sure the needle is in the correct way round, top tension about 4 or 5

Necchi 6015... | Answered on Oct 26, 2009 | 103 views


You may need to get a scrap piece of material to lead off with or hold on to your thread and gently pull it to start your material.

Necchi 6015... | Answered on Aug 09, 2009 | 66 views


If the belts are not tight enough they will slip, they should all be fairly tight but not like a piano string if you know what I mean.
As you do not describe what the machine is doing wrong I can not really say any more at present, except make sure there is no oil on the belts and the machine has no tight spots when you turn it over by hand.

Necchi 6015... | Answered on Jul 07, 2009 | 1,117 views

Not finding what you are looking for?
Necchi 6015 Mechanical Sewing Machine Logo

44 questions posted

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Irene Tulloch

Level 2 Expert

491 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...