Necchi 3102 Mechanical Sewing Machine - Page 2 - Answered Questions & Fixed issues


Not your machine number but maybe this is close.

http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Necchi_Sewing_Machine_Threading/Necchi_3537_threading_Diagram.htm

Necchi 3102... | Answered on Feb 08, 2011 | 178 views


Look at your manual, if you do not have one, take your bobbin with you and ask a sewing machine dealer. They normally stock all sizes and will sell you the right one. I tried to look it up online but could not find the exact size listed. Good luck

Necchi 3102... | Answered on Dec 30, 2010 | 144 views


check with sewingpartsonline.com

Necchi 3102... | Answered on Dec 14, 2010 | 26 views


the presser foot lever is either on the left side of the machine where face plate is or at the back of the of the machine on the left

Necchi 3102... | Answered on Nov 22, 2010 | 171 views


since you bought it used, if it is timing then a service tech can fix the problem.
& also since it is used having it serviced will give you peace of mind that everything is working correctly.
also after it's serviced, let them sew on it in your presence so you can see it's working properly, after all your paying for it to be fixed, & you should be allowed to see them sew on it after it's serviced.

Necchi 3102... | Answered on Oct 11, 2010 | 255 views


check the needle to see if it's damaged-roll on flat surface to see if it rolls correctly & also check the tip of the needle to see if it blunt or broke
check the bobbin to make sure it's not warped
make sure to keep a thread tail 3-5 inches when sewing
check to make sure the bobbin is inserted in the bobbin case correctly & the bobbin case is put in snug
if these suggestions don't work it may be that the timing is off & it would have to be serviced

Necchi 3102... | Answered on Oct 01, 2010 | 71 views


If you go to sewusa.com you can buy a manual for $10 plus shipping , it probably will be worth the money. You have a very good machine and should last for years. All metal and considered a workhorse, I have an old workhorse myself and do not want to part with it because I know that one will sew anything, sometimes the new ones are too light to handle heavier projects. Good luck with your machine, and if all else fails take it in and get it professionally adjusted, you will not be sorry. Like anything, they get old and need a little tlc occasionally, as we all do.

Necchi 3102... | Answered on Sep 17, 2010 | 36 views


In that case you will either have to contact the place you bought it from or Necchi

Necchi 3102... | Answered on Jul 14, 2010 | 154 views


Normally this will be caused by lint/thread caught in the bobbin/hook area.Remove the bobbin case, push the two fingers (about 4 and 8 oclock positions) that hold the race cover on, and then remove the hook. If it will turn now then your good. Clean the area out, put a couple drops of oil on the hook and reassemble it.

Necchi 3102... | Answered on May 26, 2010 | 104 views


I found a 3102 here - http://www.sewingstyle.com/Necchi-Sewing-Manuals.html

However, I would check with the merchant before ordering to be sure it is the correct manual for your machine.

Necchi 3102... | Answered on Apr 29, 2010 | 308 views


Ensure the bobbin thread is mounted on correctly and using your right hand turn the gear that makes the needle go up and down until it catches the thread.

Necchi 3102... | Answered on Apr 08, 2010 | 282 views


i was able to find one at www.ifixmachines.com

Necchi 3102... | Answered on Feb 15, 2010 | 161 views


I found my book & was able to solve my problem with my irregular stiches with the proper adjustments.
Thanks anyways.

Necchi 3102... | Answered on Oct 28, 2009 | 152 views


Remove needleplate and clean out lint, broken needles etcalso from around bobbin case area.

Necchi 3102... | Answered on Sep 04, 2009 | 183 views


There are a load of threading diagrams HERE, although your model is not listed, one may be similar enough to get you out of trouble.
As to a manual, a google search should give you several options for pdf downloads

Necchi 3102... | Answered on Aug 27, 2009 | 418 views


you could have your needle in backwards-- thats been the problem when mine did that

Necchi 3102... | Answered on May 21, 2009 | 243 views


It might be that u have cut the pin & must change both blades

Necchi 3102... | Answered on Mar 11, 2009 | 97 views


Your matchine is dry its need a service it must be opened, cleaned & oiled
Sello my email is matsoes@hotmail.com tel 0781503175 south africa

Necchi 3102... | Answered on Mar 11, 2009 | 80 views


Check the thread coming out from the bobbins maybe on reverse side,also check the bobbins tension adjust it there is a small adjusting screw.Check also the needle alignment lastly check the upper tension from the tension regulator knob,tension adjustment is depend on the fabrics that you sew.

Necchi 3102... | Answered on Mar 07, 2009 | 378 views

Not finding what you are looking for?
Necchi 3102 Mechanical Sewing Machine Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...