Necchi 3537 Mechanical Sewing Machine - Answered Questions & Fixed issues


Try this:

http://translate.google.co.in/translate?hl=en&sl=it&tl=en&u=http%3A%2F%2Fviewer.zoho.com%2Fdocs%2FeddHdd

i think this will surely help you!

ask for a PDF manual...by mailing them at
info@necchi.it

or call at:

1800-525-9987

Necchi 3537... | Answered on Sep 18, 2018 | 236 views


Usually pedals possess a variable rheostat controller that react with the action of your foot. If it fails to function normally, it suggests that a short circuit has occurred. Generally, that means an internal wire or contact opens up and stops all further activity as you mentioned. The best bet is to take the machine to your local sewing machine dealer for repairs.

Necchi 3537... | Answered on Jan 13, 2018 | 48 views


A lot of machines have a speed control, either on the machine or the foot control. I looked thru the manual and did not find anything about speed control. Look under the foot control for a screw that may have a + and - . Otherwise, you may want to take it back to see if service can adjust it for you.

Necchi 3537... | Answered on Jan 10, 2018 | 311 views


does anyb ody have a manual i can download

Necchi 3537... | Answered on Feb 05, 2017 | 500 views


There are a number of things that could cause this.
Needle installed with flat in the wrong direction.
Excessive thread tension,top or bottom.
Lack of lubrication. If the machine can do anything more than a straight stitch the mechanism can gum up and not move the needle correctly.
Here is a link to threading directions.
Necchi 3537 Sewing Machine Threading Diagram

Necchi 3537... | Answered on Aug 03, 2014 | 168 views


there are no free manual for a necchi sewing machine that I know of
but incase you want to buy one here is a link for one that's only a little over $10.00 + shipping.
Necchi 3537 Instruction Manual
or you can try the allyn international co, that used to sell them, here is a email address
Allyn International ----phone--303-825-5200

Necchi 3537... | Answered on Jul 18, 2014 | 261 views


There won't be many people on here with experience of that drier (in my opinion!), but here is a forum where you are more likely to get the help you need: Coin Laundry Forums Planet Laundry

Necchi 3537... | Answered on May 14, 2014 | 63 views


Remove side cover to check...a little confused about which make/ model you have from the above detail
Contact Us at Bargain Box

Necchi 3537... | Answered on Apr 22, 2014 | 131 views


here is a link for a manual, the information should be in the manual for oiling the machine. if the machine is rarely used oing it every 6 months should be ok
http://sewusa.com/Sewing_Machine_Manuals/Necchi_Manuals/3537_Instruction_Manual.htm

Necchi 3537... | Answered on Nov 08, 2013 | 48 views


it sounds like it would be a good time to take the sewing machine in for service and see if there is a timing problem.

Necchi 3537... | Answered on Aug 12, 2013 | 162 views


here is a link for a manual, that should have the information in it
http://www.sewusa.com/Sewing_Machine_Manuals/Necchi_Manuals/3537_Instruction_Manual.htm

Necchi 3537... | Answered on Aug 01, 2013 | 38 views


here is a link for a manual for the sewing machine, or you can check youtube for a video
http://www.sewusa.com/Sewing_Machine_Manuals/Necchi_Manuals/3537_Instruction_Manual.htm

Necchi 3537... | Answered on Jul 30, 2013 | 60 views


I am making a copy of my parents right now. It seems everyone is looking for the manual but nobody wants to give them up for free. It is 35 pages long. as soon as I get it to a pdf format you may have my 1st copy. Ed

Necchi 3537... | Answered on Apr 21, 2013 | 129 views


it's the same size as a night light bulb. That's how I replaced mine. You can pick one up at any hardware or dept store.

Necchi 3537... | Answered on Jan 07, 2013 | 217 views


necchi's are good sewing machines, I personally own 2 necchi's,
and I've never had any problems with them and I've had them for around 10 years, here is what I suggest
use a new needle--one that is for the fabric your sewing
rethread the machine top and bobbin--use every thread guide
try a different bobbin
clean under the needle plate and in the bobbin area for lint
call a sewing machine repair shop in your area and ask them how
much a necchi sewing machine is worth or check on ebay and see
what they are selling for.
since you inherited the sewing machine,, having the machine
serviced completely would be a good idea, that way they can check
to see if the grease and oil that the gears and parts use is fresh or
needs to be replaced and it's very important the grease and oil are in
good condition.
and they can make sure the machine's is timed correctly
ask how much a tune up cost for a sewing machine and then
you'll have to decide if the price is what you want to pay.

also since the sewing machine is doing repeat loops from the bobbin
adjust the top thread tension just a little at a time till the stitch looks
normal on a scrap piece of fabric
if you don't have a manual on the sewing machine let me know & I'll try
to find you one.
I've been sewing for 30 years, and like I said I have 2 necchi's already
and I had one other one before these 2 that I have now and it lasted me
for around 15 years and I wore it out making clothes.
I wouldn't hesitate to buy or except another necchi because I know
they are good machines.
I have a mechanical and a electronic necchi and my husband uses the
electronic one when he makes quilts.
good luck on your decision
Merry Christmas and A Happy New Year

Necchi 3537... | Answered on Dec 17, 2012 | 1,741 views


If your Necchi has an external motor, take the belt off and run it.... is the motor sluggish? If so... that's where you start. motors need to be oiled, typically with oil and grease ports on either end of the motor housing.

If the motor spins up nicely,... you need to clean and oil the rest of the machine. Start underneath if the bottom workings are exposed, oil all the places where metal joins metal. Then do the bobbin and feed dog area... then look along the top and sides for oil parts.. give them a drop or two...Finally, see if you can get into the head where the take up lever and such are... oil the needle bar, presser foot bar, etc.

It's a dirty job... so prepare a good space for your machine. Liquid Wrench will help you free up gunked up and rusty parts. Fine grade steel wool (0000) and Cotton swabs help.

Good luck

Necchi 3537... | Answered on Oct 11, 2012 | 277 views


You said it jams when you start to sew. Please clarify. how and where does it jam?

Make sure you threaded the machine with the foot in the UP position. Make sure your bobbin is in the case correctly and is spinning in the correct position when you pull on the thread.

When starting to sew, grasp the top and bottom threads and gently tug, then hold it down to the surface of the machine as you begin the seam.

Necchi 3537... | Answered on Jul 14, 2012 | 63 views

Not finding what you are looking for?
Necchi 3537 Mechanical Sewing Machine Logo

150 questions posted

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Irene Tulloch

Level 2 Expert

494 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...