Top 20
Singer CE-200 Quantum Futura Computerized Sewing Machine - Page 3 Questions & Answers
Thread my bobbin, Code 88 starts flashing & all lights
I owned a CE-200 for about six years, and as I recall, that code blinks if your needle is not all the way up. If it is NOT up, operations are suspended until it is. That means that the hoop cannot reset to its default position.
My bobbin casing keeps popping out when I try to
it would be a good idea to have the bobbin case checked at a sewing machine repair shop to see if the bobbin case needs to be replaced or see if there is something wrong with the hook and hook race.
Thread bunching on back
Check your tension. It should be on about 4 for regular cotton fabric. Adjust it according to the thickness of your fabric if this continues.
How do you know when the feeder dogs are up and
you can see the feed dogs in the needle plate area and be able to feel them with your fingerand the machine will sew a straight stitch when the feed dogs are in the up sewing positionif the feed dogs are down then the machine will not sew only stay in one position
Board
Close your futura file & exit, switch off your futura machine. Disconnect the embroidery unit from the machine,move the hoop carriage a bit to the left then to the right & it should be able to move. Connect back embroidery unit to your futura machine,ensuring the connecting point click properly. Re thread the machine & ensure needle is fully up position. Now you switch on the machine, you will see hoop carriage moving and stop at its zero point. If that is OK and the earlier led blinking gone, you should be able to operate the futura embroidery program again.
Singer 250 can not run 86 on 64 platform
There is an update to give an x64 driver for the Singer CE-250 that will let you run on an x64. With the sewing machine not connected to the computer, install the software that came with the machine. Click OK at all of the "cannot run x86 build on a 64-bit OS" messages. When it is done, install the software from
http://futura-support.com/products/ce-250/software . (The second one is for XP, Vista, and Win7 versions.) Accept the unverified driver (install anyway). After this completes, then connect the sewing machine to the USB port on the computer. Similar patches exist for the CE-200. I hope this helps. Please add a comment with the version number of your software. I know with Husqvarna Viking's 3D Embroidery, there are versions that can be upgraded to work with x64 and versions that are not patchable.Cindy Wells
Cd access code is not on my cd case how do i get it
You can locate the serial number on the back of the CD or DVD case. also Please check your email which is provided as contact. Usually the serial number is sent to the email ID too. In adverse case you must contact the company support line or the supplier. Good luck.
How do i cancel previous transmission on singer futura?
you can go to the design on the machine and push skip on all the colors or you can just go to your compter and restart it and it will lose the memory for that design. now that i helped you out can you pleasse help me out on the back of your startup cd there is a access code can you type it in a email back to me and i can assist. you better and correctly. thanks sharon
Not finding what you are looking for?