20 Most Recent Singer 5050 Mechanical Sewing Machine - Page 3 Questions & Answers

What if you get a thread stand? does it happen when stitching vigorously or normal stitching? Thread stands helps keep tension and avoid thread jumps etc...

Timing of the machine is done by loosening the screws on the gears to move the hook such that the tip of the hook is above the eye of the needle when the needle has risen 2.5mm.

http://userguides.50webs.com/

http://userguides.50webs.com/Get your manual here .

if the bobbin is broken or damaged then just replace it, with a new bobbin , having several bobbins is always a good idea.

check with this website and see if they can help youa1sewingmachines.com,, go to the contact us section, there is a email and a phone number

have you got a buttonhole lever on the sewing machine that has to be pulled down first before starting the buttonhole?

here is a free manual for the machine, it should have the informationabout the tension in ithttp://www.singerco.com/uploads/download/446_5040_5050.pdf

Go to singerco.com and download a manual for free, you are not threading it right

you didn't say what the name and model number of the machine was, but the question was put under singer model 5050, so thatsthe manual I found , here is a free downloadable manual, congratulations on your gifthttp://www.singerco.com/uploads/download/446_5040_5050.pdf

http://www.tandtrepair.com/SchematicsPage.html

Take it back.

here is a free manual, the information you need should be in ithttp://www.singerco.com/uploads/download/446_5040_5050.pdf

how much money are what?

Needs servicing. Take it in.