20 Most Recent
White Sewing 1418 Mechanical Sewing Machine - Page 4 Questions & Answers
The thread from the needle keeps breaking
rethread the machine
check the top tension-try 3 or 4
change needle & make sure the needle is inserted correctly
some time the needle & thread don't work togeather--try this
Cut 6-8 inch piece of thread of the spool you are going to use for your project
Take the needle you are going to use for the project
& insert the thread thru the eye of the needle
& lift one end of the thread to a 45 degree angle
& if the needle is the right size for the thread it will slide down the thread
But if the needle hangs on the thread you need one size larger needle for the thread
When I sew, the topstitch looks fine but when I
clean under the needle plate where the feed dogs are for lint
also clean in the bobbin area for lint or loose threads
also check the top thread tension--try 3 or 4
rethread the machine top thread & bobbin
make sure the bobbin is wound correctly- if it's not wound correctly it will cause sewing problems
also change the needle
How do you thread the
Insert the needle with the flat side of the needle shank facing towards the back. The thread is inserted into the needle from the front of the eye through the back.
Im not sure which presser
Do you have a manual?
If not, you can download one free from the Singer site.
http://www.singerco.com/accessories/manuals.html
Just type in 1418 and click on
search.
On the next page click on
free download!
Page 3 of the manual (page 7 of the PDF file) shows you the accessories for the machine, including the presser feet.
Hope this helps!
The needle will not move
Can you move it by moving the hand wheel ? Might need a thorough clean and oil, look for thread jammed in a guide; good luck
W1409 model, I need a
You can google, tias, relics and they have a service manual for White & dometic generic and it would help you. It costs $21. but maybe a better way would be to go to
www.sewingpartsonline.com and buy the part for $19. with the directions, and they will be able to tell you how to do it. It must have had a problem to begin with, so it may not work if you get it back on. Good luck, but I think I would opt for the new part, if it were me.
Teeth do not move material forward when sewing
the problem is the feed dog is in the wrong position,, in the operation manual it should tell where the feed dog is on that sewing machine, & what position it's suppose to be in to sew normally
Trying to find out how to thread the machine
Here is an excerpt from them manual
Or you can download the full manual for free at-
http://homeappliance.manualsonline.com/mdownloads/8fe263bc-7b71-400a-a8a1-d2973c150003.pdf
Let me know if you need more help,
Chris
Not finding what you are looking for?