White Sewing Superlock 1934D Mechanical Sewing Machine - Answered Questions & Fixed issues

White sergers (Superlocks) and sewing machines were made by Singer. Singerco.com has many of the manuals available as a free download: http://www.singerco.com/support/instruction-manuals . However, I've never heard of a White 1924D. Did you give the correct model number? The threading diagrams for the 1934D is in part 1 of that machine's manual start on page 18. The direct link to this manual is here: http://www.singerco.com/uploads/download/982_sl-1934d,2000-a-x.pdf . Most White Superlock machines have very similar threading directions. I hope this helps. Cindy Wells

I'm not sure if this is exactly what you're asking, but there's free White brand sewing machine manuals via the Singer website, strange as it may seem. Look under Singer's "Support and Resouces" then select "Instruction manuals" , or follow this link: http://www.singerco.com/support/instruction-manuals On the Instructions Manual page you'll see it says "Find Your Manual - Step 1, Step 2 etc etc" and under that there's a search box that says "Model Number" Into this search box just type "w" (don't type "white", because that doesn't work) You'll be taken to a near incomprehensible results page but scroll down and you'll see there are two listed as WSL1934D. Just click the button "Free download" to the right of the lists, and it will open a PDF file of the manual. Good luck, and I hope you find what you need :) Kind regards Kura Instruction Manuals

Check the manual for your machine for correct needle type.

try new needles make sure the threading is correct, using every guide make sure the tension is set correctly

Yes, you can get the manual from Singerco.com. http://www.singerco.com/accessories/instruction-manuals . Enter only the 1934 and click Search to find the available manuals. The manual is available as two PDF files. The direct link for part 1 is http://www.singerco.com/uploads/download/982_sl-1934d,2000-a-x.pdf . Part 2 is here: http://www.singerco.com/uploads/download/983_sl-1934d,2000-b-x.pdf . I hope this helps. Cindy Wells

I have a White Superlock 534,the needle broke and I tried to change the needle and lost the screw,it is so tiny I cant find it,is their any way I can buy the same tiny screw.I like to have 2 needles.

Timing an overlocker is NOT for home service, it takes training, tools, gauges and experience take it in to get it fixed

Sounds like your machine is either out of time or the needle isn't in far enough. I am more apt to say, out of time.. You should take it to your local repair center

try these links for a free manualhttp://www.singerco.com/uploads/download/982_sl-1934d,2000-a-x.pdfhttp://www.singerco.com/uploads/download/983_sl-1934d,2000-b-x.pdf

First take all the thread out of the machine. Put in new needles and run the machine slowly by hand and see if there is a problem with timing. If the needle hits and bends or breaks... take it in to be timed. If the needle don't hit.... Make sure you are properly threading this thing. Unlike a sewing machine which gives you some leeway, Sergers must be threaded in a certain order. Typically, upper looper, lower looper, right needle left needle. If you break a thread you can't just rethread that thread... you have to start from the beginning. You might check singerco.com for the manual for this thing. They have most of white's manuals online they are identified by a W before the serger model number.

did you get the cutter release knob back in the right place or position?is the horseshaped bracket damaged in any way?

what is the name & model number of the machine?do you have a manual?try changing the needles

Singer owns the White line. The manual for the 1934D Superlock is available in two pdfs: http://www.singerco.com/uploads/download/982_sl-1934d,2000-a-x.pdf and http://www.singerco.com/uploads/download/983_sl-1934d,2000-b-x.pdf .The section on the thread tension starts on page 38 of the first manual. I hope this helps. If you need additional assistance, please indicate which threads (upper, lower) that are not correctly tensioned.Cindy Wells (this is a multi-language manual. Page 38 has the tension information in English. Please note I needed to use the rotate feature in Adobe Reader to make it easier to follow.)

White Superlock 1934D Serger Instruction Manual

Go to the singer website
Go to the home page
At the bottom of the page look for instruction manual--click on it
It will take you to another page
In the box put the model number (example 1934D ) & click search
They usually have a free download

I use schmetz universal needles in all my sewing machines or try sewingpartsonline.com

try sewingpartsonline.com

There's a free to download manual available on the Singer site. It looks like you manual is out of print though.
http://www.singerco.com/accessories/manuals.html
Just type in 1934 and click on search.
Then click on free download!
I saved files like these for my manual onto a USB pendrive (you could burn a CD) and took them to work to print out and bind myself. Hope this helps!

Go to www.singerco.com and under customer support put in 1934 and download it for free. Good luck

Go to www.sewingpartsonline.com and you can order from them. Or else call Singer at 1-800-4singer and you can order from them. Good luck and happy sewing.