Top 20 GE 27990GE3 Cordless Phone Questions & Answers

I was unable to locate a manual for your phone online, but can offer some suggestions to solve your problem.Most cordless phones beep in battery low, out of range, and other situations. Since it is also displaying the "Searching" message, it indicates that it lost its link with the base due to being brought too far from it or the battery power has fallen to low to permit use as far as it may have worked before.The quick fix is to simply place the phone into the base / charger. This re-establishes a security link between the cordless handset and your telephone line. This is a safeguard that is used to prevent others with the same cordless phone from merely getting "near your base / charger" and gaining access to your dial tone to place calls on your phone line.If the battery is low, it should left to remain on the base / charger long enough to fully charge the battery. If the battery fails to charge, there may be an issue with the base / charger; but it is much more likely to be a problem with a battery that has reached the end of its useful life (batteries seldom last more than a couple of years and may not last a single year depending on usage). Either condition will require replacement of the faulty device before using again. If you need more help, you may want to try Thompson Electronics (if purchased prior to 2011) at 800-448-0329 or their website; as it appears GE contracts with them for support after the warranty period.Good luck!

that doesnt sound like a problem with the phone it seems like it is a problem with your provider give them a call they can sort it out good luck

Go to http://www.thomsonnetwork.com

Click on View an Instruction Book

Enter 26990 in search field, click Search

26990GE1-D DOM IB E 0 is the manual

yea.. this happeneded to me aswell.. here's what you do: (this is in the manual btw) TONE/PULSE SETTING 1. Make sure the phone is OFF (not in TALK mode). 2. Press the program button. 3. Press * tone button for tone or # pause for pulse selection. 4. Press the program button again. You will hear a confirmation tone.

That will be because the static was at the callers line, not at your end. At this time of year it is water in junction boxes at the caller's residence. If it was on every call, it would be down to your connections.

Remove all the phones on the system. Remove all the handset batteries. Plug in one old style corded phone to the main phone jack, it is normally the one closest to the front door. Do you have dial tone? If not, it is your Telco. If you have a dial tone, plug all the other phones in testing for a dial tone as you go.

A leak coming from the front of a front-load washer is often caused by a damaged or dirty door seal. If the door seal is cracked or loose, it will need to be replaced in order to restore a watertight seal. Always ensure all clothes pockets are empty prior to washing, as objects left in pockets can damage the door seal.

Line in use means another phone is being used. If you have more than one phone, the second phone is off the hook or someone is already using the phone. Check all phones and be sure they are hung up.

Question edited for a lot more clarity. You are only the second person to have this issue. Refer to the manual and do a reset, but in doing so you will lose all saved data. https://www.google.com/search?q=general+electric+ge+27956fe1+white+screen+fix ..

Posting a follow-up as a new post doesn't work here at Fixya because posts are not threaded by poster or previous posts. Therefore this post has no context to your previous post. Also worth noting that it was 15 days ago!If you click COMMENT under Fred's answer, he will get a notification and come back to help you. Thanks Karenhttps://www.fixya.com/support/t29866451-ge_speaker_phone_29480ge2_when_someone..

only the service provider can activate that and it costs more money

If you mean the long-life lithium backup battery for the corded 2-line GE 2-9421 (A indicating the sales region), that is a 3V Lithium battery. The part number 5-1923 appears to be a common CR2032 coin cell battery. These are used as backup batteries for Eraseable Programmable ROM on many devices, including computers.. One source is https://www.batteriesdirect.com/product/details/button-cell-batteries/ge/5-1923 . Any CR2032 from a reputable manufacturer will work. I hope this helps. Cindy Wells

Probably you wont be able to change password without erasing all messages. That is the point of having security code

https://www.geappliances.com/ge/service-and-support/literature.htm

https://www.searspartsdirect.com/manual/4tnzhmkqk9-000432/ge-gss20gewpbb-side-by-side-refrigerator

try setting the original time on the machine correctly all recorded data is set from that original time setting

Hi, Try the LAST ONE on this page; https://disqus.com/home/discussion/channel-nyougytingme/manual_electronic_timer_ge5115p/ Best of luck.

Try here;http://phone.manualsonline.com/manuals/mfg/ge_appliances/stainless_steel_finish_dect_60_with_digital_answerer_caller_id_model_27909ee1.html Best of luck.