20 Most Recent
GE 29897GE1 Corded Phone - Page 3 Questions & Answers
Phone won't ring
There may be a ringer control button on the side that is in the off position or a menu option to control the ringer.
Model 29827A...old phone but the one my mom is
Hi,
A power outage may have shut the answering machine off.
On mine there is a program button. I can turn my answering machine on or off, how many rings before it starts. If you do not know how to access the phones programs, try unplugging the little square transformer plugged in the electric wall socket and plug it back in.
The phone may tell you how to reset the functions.
Worth a try.
Print out the whole manual?
Here is your manual:
http://phone.manualsonline.com/manuals/mfg/ge_appliances/ge_29897ge1_29897ge1.html
Just click the "get this manual" blue button
Looking for battery compartment
Your battery compartment is more than likely located in the back of the unit underneath the mounting bracket. You need to remove the mounting bracket in order to gain access to the battery compartment.
You can find your manual here:
http://phone.manualsonline.com/manuals/mfg/ge_appliances/ge_29897ge1_29897ge1.html
But it doesn't have any reference to your battery compartment for your phone. That I could find anyway.
Keeps asking to set up over and over.
This happens when the connection to the internal battery is loose or if the internal battery is faulty.In a rare case it can also happen if internal memory on circuit board is gone faulty.
To solve this initially open the set and check the battery if the connections are good or not ,if still has problem than replace the battery.it will ask you to set it up once again after you replace the battery.once you set it up after replacing the battery it will work fine.
thanks.
GE corded phone answerer (27957GE1-A)
here is a link to the website where you can get the complete manual.
if the unit has not been damaged by a power spike you could try resetting it by unplugging it for awhile and then plug it in again
http://www.home-electronics.net/ge/pc/IB/27957GE1_IB.pdf
Hand set out of range disply is on. How do I
here are some tips from my manual for out of range problems
hope they help
• Only one handset can be used to make or answer a call anytime.
If another handset attempt to do so, the screen will display OTHER
HANDSET ON and then OR OUT OF RANGE. You might press PHONE
or SPEAKER again until no other handset is using the line. Use the call
transfer feature to transfer a call to another system handset
or use the speakerphone feature so multiple members of your
house can be on an active call at the same time.
• Move the cordless handset closer to the base. You might have moved
out of range.
• Ensure that the base is powered up.
• Place the cordless handset in base cradle for 1 minute to allow the
cordless handset and base to resynchronize channels.
• If the cordless handset is in its base and the charging light does not
come on, refer to the charge light is off in troubleshooting guide.
• Reset the base. Unplug the unit’s electrical power. Wait for 15 seconds
then plug it back in. Allow up to one minute for the cordless handset
and base to reset.
• Other electronic products can cause interference with your cordless
phone. Try installing your phone as far away from these types of elec
tronic devices as possible: wireless routers, radios, radio towers, page
towers, cell phones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and cordless phones.
Not finding what you are looking for?