Top 20
GE 21028GE3 Cordless Phone Questions & Answers
Why does all messages remain on APP after I delete all messages
You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
Volume on G E model 21028GE3-4
To adjust the speaker volume, press up/down on the base unit.To change the ringer volume:Make sure your phone is OFF (not in talk mode).Press the MUTE/PROG button to go to the main menu.Press CID/VOL (up or down) button to scroll to "HANDSET SETUP".Press MUTE/PROG button to confirm.Press CID/VOL (up or down) button to scroll to "RINGER VOLUME".Press MUTE/PROG button to enter the menu. "SET RINGER 1HI 2LOW 3OFF" shows in the display.Use the touch tone pad on the handset to select 1, 2 or 3, or use the CID/VOL (up or down) button to scroll to your selection. HI is the default setting.Press the MUTE/PROG button to save your selection. You will hear a confirmation tone and the new volume setting shows in the display.To change the receiver volume: When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the CID/VOL (up or down) button.If you need a manual, you can download one
here.
Need replacement battery.
Here's one source:
http://www.batteriesplus.com/products/549-0/7405-Cordless-Phone-Batteries/130755-General-Electric/2--1028GE3/1.aspx
http://www.batteriesplus.com/products/549-0/
7405-Cordless-Phone-Batteries/130755-General-Electric/
2--1028GE3/1.aspx
What does the button look
The button is marked "do not disturb" and is located near the lower-right-hand corner of the 21028 base unit.
I want to change the
These are the instructions from the manual, which I found here:
http://safemanuals.com/user-guide-instructions-owner-manual/GE/21028GE3-A-_E
RING SELECT (FOR ANSWERING MACHINE)
This feature lets you select the number of times you want to phone to ring
before the answering system answers a call.
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CID/VOL (up or down) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Press the CID/VOL (up or down) button to scroll to the RING SELECT menu.
6. Press MUTE/PROG button to enter the menu. RING SELECT 3 4 5 6 TS shows in the display.
7. Use the CID/VOL (up or down) button to scroll to the your selection. The default setting is 5.
8. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the new setting shows in the display.
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there
are NEW messages, OR the unit answers after the 5th ring if there are NO new
messages. This allows user to access their answerer from another location and
then hang up after 4 rings to save long distance charges.
Cannot find instrucrtions for the intercom. How to
Here's a link to the full operating manual for your phone. It will answer your question, and you can print it for future reference. The intercom section starts on page 33.
http://www.home-electronics.net/USER-GUIDES/21028_DOM_ES_CL_IB.pdf
GE 28112 cordless phone
with a similiar problem before i sugested to take out the battery and set it all backup again.
i said it could be a software problem. it sounds like these problems are there from the bigginning
Hi I have a Binatone
I am sure there is one to download but did not found anything with
google... If search engines are of no help, just ask some deep web
specialists, e.g.
http://manualfox.com - if they don´t find it, it does not exist in the Internet.
Model 21028GE3-A multihand phone
To change the language used by the answering machine, look behind the base. There are four buttons in back, one says Language. Press it until you hear the language that you want.
I have a GE wall phone. I want to know how to program the memory dial
Hi,
I just found the info on the internet. Here follows :
1) Pickup the handset
2) Press the STORE button once
3) Dial the number to be stored (max 16 digits)
4) Press the STORE button once
5) Press the A, B, or C button once
6) Hangup the phoneset
Then just press the A, B, or C button once when need to dial the stored number.
Have a nice day !
Phone won't work
our phones were working fine. now after an eight hour electrical shut down, no dial tone.
Not finding what you are looking for?