20 Most Recent Sanyo PLC-XP200L Projector Questions & Answers

The ballast board is the problem. Try here for parts: TV Parts Universal TV Stands DLP Chips ShopJimmy

the Lcd panels are defective, you need replace the Lcd panels (3 pieces, red, blue,green) the model of the panel is LCX085A, (unit price is USD300) We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,motherboard ,powersupply,ballast... with high quality and competitive price. Hope to cooperate with you. Jerry China Lampdeng Limited Tel: +86 131788 67858 E-mail: [email protected] Skype: lampdeng.com YM: [email protected] http://facebook.com/lampdeng http://www.lampdeng.com

Replace the lamp. The lights flashing will also indicate what is wrong. Watch how they flash. Go to the manufacturers website and they way they are flashing indicates what is wrong (ex. 3 quick flashes, long continuous flashes...etc.) When you change the lamp reset the lamp counter in the menu and clean or replace the dust filters as well.

Make sure that the projector is far back enough and also make sure you are running the maximum resolution from your laptop driver.Tony Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/tony_a41fa0b801734e2f

Have you tried changing the lamp and resetting the lamp hours

To enable the inputs you may need to check the BIOS and ensure they are enabled there. You can get to the bios usually by pressing F2 when first turning on the computer. It may vary with different manufactures.

replace the lamp and reset the lamp timer.

I'd check the manual and see if you can take them off of the automatic setting which takes a little more time for the analysis of the signal. Possibly you can reset the default source to what you commonly use.

Question edited for clarity and toss in some CAPS. How to Reset a Sanyo Projector Lamp Timer?

1. Turn on the projector
2. Press the Menu button and the on-screen menu will appear
3. Press 3/4 button to remove the red frame pointer to the setting Menu icon
4. Press the 6 button to move the red frame pointer to the Lamp Counter Reset item and then press Select button
5. The message "lamp replace counter reset?" appears. Move the point to and then press Select button
6. Another confirmation dialog box appears and select to reset the Lamp Replace Counter

https://www.google.com/search?q=sanyo+wuxga+plc-zm5000l+reset+lamp+counter ..

To download drivers for the Sanyo XU 101 projector, you will need to visit the Sanyo support website. Here are the steps:

1. Go to the Sanyo support website by typing "Sanyo support" into your search engine and clicking on the first link.
2. Once on the Sanyo support website, click on the "Projectors" category.
3. Select your projector model, which in this case is the XU 101.
4. Click on the "Downloads" tab, where you can find the available drivers and software for your projector.
5. Look for the driver that you need and click on the download link.
6. Follow the instructions to download and install the driver.

If you have any issues with the download or installation process, you can contact Sanyo customer support for further assistance.

If your Sanyo DP42481 picture is upside down and mirrored, you can try adjusting the settings on the TV. You can do this by going to the Picture Settings menu and selecting the "Picture Orientation" option. From there, you can select the "Normal" option to reset the picture orientation. If the problem persists, you may need to contact the manufacturer for assistance.