20 Most Recent Konica Minolta magicolor 1690MF All-In-One Laser Printer - Page 5 Questions & Answers

The user manual contains all error codes with description.

I told you. That is belt-assembly problem.

I think this is mechanical problem and you need to check and remove belt-related assembly part.Thanks

CAUSE: The transfer belt is not rotating correctly inside of the Image Unit.

SOLUTION: Check the PRCB connector for proper connection and correct as necessary. Also, check Belt Positioning Sensor (PS6). Replace Image Unit (p/n A0VU011). The PRCB may also need to be replaced. (p/n A034 H001 06 for magicolor 1650EN or p/n A034 H009 07 for magicolor 1680MF/1690MF)

SPECIAL NOTE: Solution contribution by SSD Printer Support ID No.

TABP1000085ENFROM KMBS SSD

IF YOU COPY FROM GLASS,AND NO LINE, THAN LIKE OTHER COPIERS THERE IS ANOTHER NARROW GLASS THAT HAS SOMETHING ON IT

I have 1690mf and changed cartridges, the 3c10 call engineer appears after printing, paper jammed. Had call out from service engineer, afraid he's at a loss too, says it is a security issue but no instructions on how to repair, waiting now to hear from Konica theselves as to what is the answer, I can still print, just have to take the paper out and switch on an off when it stops, annoying though

Me gustaria saber si lograron encontrar la colucion ya que mi impresora marca el mismo 0310.. de verdad me seria de gran ayuda su respuesta...

Service call 001B. Can't reach toner to ensure it is in properly.

The Konica Magicolor 1690MF Printer/Copier/Scanner is connected with an Ethernet Cable or USB Cable. It is not equipped to operate as a wirleless printer. It has a 10Base-T/100Base-TX Ethernet interface port and a USB Revision 2.0 High-Speed compliant port. To do two-sided printing you must have the duplex (double-sided) option installed. This also requires either Tray 2 or the Attachment to be installed underneath your machine. Tray 2 is the optional lower feeder unit which increases capcity of your machine to 500 pages. The Attachment comes with the Duplex Unit. Only Letter and A4 plain paper (16-20 lb bond) can be autoduplexed. With the duplex accessory installed you can do duplex or double-sided printing automatically. From within Printer Preferences select Two-side Printing > Automatic. Shoud have choices of Off, Manual or Automatic. Within the Layout Tab for your work you may also be able to specify duplex (double-sided). Should you have continued difficulty, please reply and advi e if the duplex option is installed and with which software and operating sysytem you are using. Thank you for using FixYa!