Top 20 Samsung LN32B360 32 in. LCD HDTV Questions & Answers

There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Depending on the operating system on your Dell. Try right click on the desktop and go to graphics properties or display settings. If the computer can 'see' the TV try to enable it by clicking 'extend desktop to this display'. If you cannot "see" the TV try the detect button and enable it as per above.

Change your source... it is waiting for your Personal Computer to be plugged in...

If you do not have a copy of the manual, you can download it from here: http://www.manualslib.com/download/472939/Samsung-Ln32b360-32-Lcd-Tv.html You can adjust the picture brightness using the picture controls. Please refer to page 25 of the manual.

Hav u Unplugd it frm the wall and did u hav a usb or hdd plugd into it as they cn cause probs if u hav any progs or apps on it

Need bit more info hav u unplugd it fir 20min or so hav u put usb or hdd into it or anyrhing eslse like that chek remote batts

Sounds like main board fault. Contact the authorized service center for Samsung. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/

Power converter board is probably blown. Take it to a repair shop.

On a 32' tv the repair probably wouldn't be worth it after labor costs. They're cheaper to replace with a new one and less of a hassle.

Main board fault. Contact the authorized service center for Sony.

There is no jumper on this model of power supply to cut. Although you can send your power supply here http://www.electronresort.com/repair-service-c-144/samsung-bn4400260b-power-supply-inverter-repair-service-p-5297.html to have it repaired if you can not find one.

Check and replace damaged component/s at its main power regulator board, or, replace the board as card basis. If you wish to get more details, check this link.http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

Sounds like your TV needs and upgrade. If your TV is internet connect it should download automatically if not you need to us a flash drive and download from this website....http://support-us.samsung.com/cyber/notice/pdp/pdp_reddiffusion.jsp. just need model number and serial number

Attempting to do service opening the back cover is not advisable, since there are hazardous voltages present even when the power cord is not plugged in. It is better to refer it to a qualified service technician.

Bad capacitors in the unit that are in the signal board.

does the display totally black or white screen then how about the sound still working.

There are 3 on Ebay

The main digital board has damaged. I2C bus short.

Visit the site named 'Electro-help' for more details. Click this link. View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. It will make search easy. There are more than 900 posts to different brand TVs now

Your backlight inverter is bad. The backlight inveter is the board that turns on the backlight on the tv so that you can see it. You would have to open up the tv to get the part number. it is usually on the far left or right of the tv attached to teh screen.You can get get parts for this tv at www.interliquidparts.com