20 Most Recent
AT&T Quickfire Cell Phone - Page 6 Questions & Answers
I CAN NOT GET THE
Hi
Do you have any other cards to try on this phone?
the issue could be that the card reader - the metal pins that are supposed to touch the card are not touching it properly, please check with another sd card, if the same issue comes up, then there is most likely a problem with the card reader or its pins not touching the card.
Since it may be difficult to adjust the pins, I would recommend that you take the phone to a local phone shop and show it to them, they may be able to sort out the problem or point you to a repairer. I wouldn't recommend trying to pull the pins yourself, you might break them if you are not careful.
I am trying to unlock a AT&T Quick Fire phone
Hi i'm Rain First lets try a
Soft Reset.
Remove battery ,wait 1 minute replace battery and boot Mobile device.
If this does not work you will need to do 1 of 2 things. Take the phone in and have them reset it.
The other option is a
Hard Reset.
To perform a Hard Reset :
- Select Menu
- Select Settings
- Then select Security
- Click Master Reset
- Then select yes
- Type Default password 0000 4zeros
- Select done
Phone will reboot after it has performed the Master Reset.
I hope this information has been helpful.
My sd card won't stay in my quickfire cell phone
Hello,
Can you be a little more specific. What is the SD card doing when you put it in ? Popping back out ? Does it stay for a little while ?
The more you can tell me the more it will help me to assist you.
Thank you for choosing Fixya!
I CAN NOT GET THIS PHONE TO RECOGNIZE THAT THER IS
Hi,
Folow thw instruction:
- Flip open
- Enter 277634#*#
- Scroll down to #4 port setting and click ok
- Scroll down to #4 mass storage and click ok
- Scroll down to #5 mass storage remove and click ok
- Press clr to get out of the menu's
If this solution doesnt work, Please leave me comment,ill give you alternate solution..
Rnj VINODKUMAR
I forgot my pass code on my cell phone
callon custumer care he will tell ur pass code.if ur prob will not solve then go to ur near shop nd tell ur prob then shopkeeper will tell u.wht u should have to do
Charger is not recognized by my phone when i plug it in
I had the same problem. There are little teeth inside your phone and the connection for the charger. One or more may be bent and if one of them is not touching, the charge will not start. I would recommend either purchasing a new charger or bringing your phone to the location you bought or another authorized retailer and have them take a look at the "teeth".
My screen went out and i want to know where to click
have you taken out the battery and put it back in? If this helps then quickly get the numbers on the sim card. If it does not work but the key pad works you may have to do a little repairing. It is usually the flex cable that gets ripped there fore making the screen not work, Check on google for the exact part then on ebay to purchase.
Not finding what you are looking for?