Top 20 Lanier 1205 Copier - Page 4 Questions & Answers

Easier to replace hopper P/N B0273501, not too pricey. -Carl

So far, I have not found that this unit, when equipped with the optional WIFI card, is AirPrint compatible. However, if you have a Windows PC on your network, and it has drivers for the MP171, you can get an AirPrint Print Server program called "Presto," from Collobos. https://collobos.com/airprint.html

That is the master clamper area. Take off the rear cover. From the rear it is on the right. There is a motor and a rack gear that moves to open the drum master clamper when removing and loading a master. With the back cover removed, try to make a master while watching that assembly. You can also put the drum in and drive the motor by hand to watch and see if opens the drum clamper.

The LD-620 appears to be a Ricoh Aficio MP-C2051 or C2551. You should be able to find a parts list on the net. Whichever one looks the same as your lanier (who don't make anything) will be the one. Good luck

Its the brown belt thing on the right door, take off the 2 springs and remove the belt assy and empty, very messy...-Carl

Heat roller error

Laser sync error, bad mirror motor?

Metal tab on right side of copier is bent and correctly touching the duplex unit interlock switch. Open the duplexer and notice the metal tab stick out. Put back to a 90 degree angle.

select manually on the panel.

The error code is not related to the toner. What model?

Depends on the associate engine code. Most of the time it means that maintenance is overdue. Otherwise, it is an electronic issue.

That is from a dirty thermistor in the fusing unit. It is the one touching the pressure roller.

That code is usually a problem inside the laser unit - the polygon mirror motor.

defective toner... take it back to your vendor

SP Mode 5832-001

What model?

What model? That is a fuser error code.

Lubricated the bushings on the black foam roller on the inside of the right hand door. Toner leakage is unrelated unless the drum unit gears are causing the noise, in which case, it must be replaced.

Hot section problem, call the service guy

Must have the paper loaded in landscape in one tray and portrait in the another. Then select sort mode on the panel when copying.