20 Most Recent Lanier 1205 Copier - Page 6 Questions & Answers

So far, I have not found that this unit, when equipped with the optional WIFI card, is AirPrint compatible. However, if you have a Windows PC on your network, and it has drivers for the MP171, you can get an AirPrint Print Server program called "Presto," from Collobos. https://collobos.com/airprint.html

Here's a workaround while you're searching. Download CutePDF or PDF redirect and install. Now after you scan to picture, copy and paste to a document and print or just print the image and send to the new 'printer' to PDF thingee and voila ... PDF reDirect The free PDF Creator alternative to pdf995 cutepdf and freepdf

Easier to replace hopper P/N B0273501, not too pricey. -Carl

IH inverter current error at power on. Either the fuser is damaged or the invertor coil is defective. You really should have a Ricoh tech look at that one. It is not an easy fix for the layman.

It is in the Ricoh maintenance kit.

Dirty thermistor in the fusing unit.

What model? That is a fuser error code.

Must have the paper loaded in landscape in one tray and portrait in the another. Then select sort mode on the panel when copying.

Lubricated the bushings on the black foam roller on the inside of the right hand door. Toner leakage is unrelated unless the drum unit gears are causing the noise, in which case, it must be replaced.

select manually on the panel.

SP Mode 5832-001

That code is usually a problem inside the laser unit - the polygon mirror motor.

What model?

That is from a dirty thermistor in the fusing unit. It is the one touching the pressure roller.

Depends on the associate engine code. Most of the time it means that maintenance is overdue. Otherwise, it is an electronic issue.

The error code is not related to the toner. What model?

Metal tab on right side of copier is bent and correctly touching the duplex unit interlock switch. Open the duplexer and notice the metal tab stick out. Put back to a 90 degree angle.