20 Most Recent
AT&T CECT Unlocked i68+ Quadband GSM FM Mobile Phone+Free gift Smartphone - Page 9 Questions & Answers
When using my key pad for texting on i68 the
Have you already tried calibrating the touch screen? Tap "Settings" and then "Pen calibration". I you have done this a few times and the accuracy is still very poor, you can buy new ones on Ebay for about $8. It requires soldering but only 4 (small) tabs.
6/12/2010 7:13:38 PM •
AT&T CECT...
•
Answered
on Jun 12, 2010
I was in engineering mode of my sciphone i68+.
Congratulations my friend, you just brick your phone. You don't have to install a new firmware, this is a mis information. As long as the phone shows that is charging when you connect it to the computer, the firmware is OK. You just need to reformat your phone. You need to get a flash data cable for your i68+ (and driver) and a program called Spiderman. Please go to www.mysciphone.com
5/31/2010 12:52:00 AM •
AT&T CECT...
•
Answered
on May 31, 2010
How I ACCESS THE INTERNET
Alfredo,
Please call up the AT&T helpline and ask specifically for the following informatin:
IP Address
Port Number (most likely 8080)
Port Setting
and APN
After incorporating these settings you have to give other settings which are not service provider specific.
Then your internet will work.
5/20/2010 11:31:20 PM •
AT&T CECT...
•
Answered
on May 20, 2010
How do I change my
Hello,
Go to the "Start" menu, then choose "Settings," "Control Panel" and
"Regional and Language Options."
Click the "Languages" tab, then the "Details" button, the "Settings"
tab and the "Add" button.
Choose an input language from the list. You can choose ANY language, if English (US) is the "input language," check the
"Keyboard layout/IME" box to select the US-International English
keyboard from the list. Click "OK" and close the input window.
A
language indicator should appear in the System Tray (the area in the
bottom right hand corner of the desktop). Switch between input languages
by pressing the "Alt" and "Shift" keys simultaneously.
Click "Apply" to finish the process and finalize your choice.
Take care.
5/14/2010 5:56:56 PM •
AT&T CECT...
•
Answered
on May 14, 2010
My cect i9 phone won't read the sd card
THIS WILL MAKE YOU LOOSE ALL FILES!!!
(even password)
Take the memorycard out of the phone and,
put it in a computer.Use filesystem FAT-32
to reformat your memorycard.
Now the card will work again!
No password, No files will be left after a
complete reformat
This is your solution! Please vote!
5/12/2010 1:01:03 PM •
AT&T CECT...
•
Answered
on May 12, 2010
Set up gps on sicphone
GO TO SERVICES AND FOLLOW THE FOLLOWING:
SELECT DATA ACCOUNT
SELECT GPRS
SELECT ANY OF THE PROFILES LISTED(EXAMPLE CHINA MOBILE)
A SCREEN SHOWS ACCOUNT NAME, APN, USER NAME AND MORE
EDIT ACCOUNT NAME TO AT&T, GO ON OPTIONS AND PRESS DONE
EDIT APN EDIT TO wap.cingular (lower case), GO ON OPTIONS AND PRESS DONE.
EDIT USER NAME TO [email protected] (UPPER CASE) AND PRESS DONE.
EDIT PASSWORD TO CINGULAR1 (UPPER CASE) AND PRESS DONE.
EDIT AUTH. TYPE TO SECURE.
SELECT DONE AND IT SHOULD ASK TO SAVE, SELECT YES.
GO BACK A COUPLE OF TIMES UNTIL THE OPTION WAP AND DATA SUPPORT APPEARS AGAIN
SELECT WAP
SELECT SETTINGS
SELECT EDIT PROFILE
SELECT SIM 1 OR SIM 2 (OTHER SIM NEEDS SETUP IF BEING USED ALSO)
IF AT&T APPEARS SELECT IT, IF NOT EDIT ANY PROFILE AND RENAME IT AT&T.
SELECT EDIT PROFILE
GO ON HOMEPAGE AND CHANGE IT TO http://device.home lower case)
GO ON DATA ACCOUNT, THAN GPRS, AND SELECT AT&T.
GO ON CONNECTION TYPE, ITSHOULD READ HTTP, PRESS ON IT, SELECT HTTP
ENTER PROXY ADDRESS 066.209.011.032
ENTER PROXY PORT 8080
EDIT USER NAME TO [email protected] (UPPER CASE) AND PRESS DONE
EDIT PASSWORD TO CINGULAR1 (UPPER CASE) AND PRESS DONE.
PRESS OK THAN SELECT DONE AND IT SHOULD ASK TO SAVE, SELECT YES.
SELECT ACTIVATE PROFILE( ATT WILL APPEAR AS SELECTED)
THE PHONE IS READY. GO TO SERVICES AND SELECT HOMEPAGE FOR INTERNET.
MMS SETTINGS
1. Select Messages
2. Select MMS
3. Select MMS Settings
4. Select Edit Profile
5. Select any profile
6. Choose Edit Profile
7. Edit Rename Profile to AT&T MMS
8. Press Options
9. Press Done or OK
10. Edit Home Page to http://mmsc.cingular.com
11. Press Options
12. Press Done or OK
13. Select ATT MMS and press OK
14.Edit Connection Type to HTTP
15.The IP address is 066.209.011.032 and the port number is 8080 and press OK
16.Edit the Username to [email protected] (UPPERCASE)
17. Press Options
18. Press Done or OK
19.Edit the Password to CINGULAR1 (UPPERCASE)
20. Press Options
21. Press Done or OK
22. Press Done
23. When prompted to SAVE please select Yes
24. Select Activate Profile and yes.
5/10/2010 5:30:27 AM •
AT&T CECT...
•
Answered
on May 10, 2010
Sciphone i68 AT&T GPRS & MMS Internet Settings
Thanks to the author, follow these steps:
GO TO SERVICES AND FOLLOW THE FOLLOWING:
SELECT DATA ACCOUNT
SELECT GPRS
SELECT ANY OF THE PROFILES LISTED(EXAMPLE CHINA MOBILE)
A SCREEN SHOWS ACCOUNT NAME, APN, USER NAME AND MORE
EDIT ACCOUNT NAME TO AT&T, GO ON OPTIONS AND PRESS DONE
EDIT APN EDIT TO wap.cingular (lower case), GO ON OPTIONS AND PRESS DONE.
EDIT USER NAME TO [email protected] (UPPER CASE) AND PRESS DONE.
EDIT PASSWORD TO CINGULAR1 (UPPER CASE) AND PRESS DONE.
EDIT AUTH. TYPE TO SECURE.
SELECT DONE AND IT SHOULD ASK TO SAVE, SELECT YES.
GO BACK A COUPLE OF TIMES UNTIL THE OPTION WAP AND DATA SUPPORT APPEARS AGAIN
SELECT WAP
SELECT SETTINGS
SELECT EDIT PROFILE
SELECT SIM 1 OR SIM 2 (OTHER SIM NEEDS SETUP IF BEING USED ALSO)
IF AT&T APPEARS SELECT IT, IF NOT EDIT ANY PROFILE AND RENAME IT AT&T.
SELECT EDIT PROFILE
GO ON HOMEPAGE AND CHANGE IT TO http://device.home lower case)
GO ON DATA ACCOUNT, THAN GPRS, AND SELECT AT&T.
GO ON CONNECTION TYPE, ITSHOULD READ HTTP, PRESS ON IT, SELECT HTTP
ENTER PROXY ADDRESS 066.209.011.032
ENTER PROXY PORT 8080
EDIT USER NAME TO [email protected] (UPPER CASE) AND PRESS DONE
EDIT PASSWORD TO CINGULAR1 (UPPER CASE) AND PRESS DONE.
PRESS OK THAN SELECT DONE AND IT SHOULD ASK TO SAVE, SELECT YES.
SELECT ACTIVATE PROFILE( ATT WILL APPEAR AS SELECTED)
THE PHONE IS READY. GO TO SERVICES AND SELECT HOMEPAGE FOR INTERNET.
MMS SETTINGS
1. Select Messages
2. Select MMS
3. Select MMS Settings
4. Select Edit Profile
5. Select any profile
6. Choose Edit Profile
7. Edit Rename Profile to AT&T MMS
8. Press Options
9. Press Done or OK
10. Edit Home Page to http://mmsc.cingular.com
11. Press Options
12. Press Done or OK
13. Select ATT MMS and press OK
14.Edit Connection Type to HTTP
15.The IP address is 066.209.011.032 and the port number is 8080 and press OK
16.Edit the Username to [email protected] (UPPERCASE)
17. Press Options
18. Press Done or OK
19.Edit the Password to CINGULAR1 (UPPERCASE)
20. Press Options
21. Press Done or OK
22. Press Done
23. When prompted to SAVE please select Yes
24. Select Activate Profile and yes.
Internet access
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever
7.Edit APN to wap.cingular (lowercase)
8.Edit Username to [email protected] (UPPERCASE)
9.Edit Password to CINGULAR1 (UPPERCASE)
10.Edit Auth Type. to Secure
11. Save
Select Back
Select WAP
Select Settings --> Edit Profile
edit the name to whatever you would like
Edit Homepage to http://device.home
Edit Data Account to the Name you established in the First Step
Connection type to HTTP
The IP is 066.209.011.032, port 8080
Edit Username to [email protected]
Password to CINGULAR1
Select back or done
Select Activate
You should now see a Black [G] in the upper left of your screen.
MMS
Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to [email protected] (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)
Select Done or Save
Make sure to activate the profile and you are good.
5/8/2010 7:46:33 AM •
AT&T CECT...
•
Answered
on May 08, 2010
Not finding what you are looking for?