20 Most Recent Frigidaire Affinity AEQ6000WH Dryer - Page 2 Questions & Answers

Hello difow - From what you are describing the issue could be related to a damaged hinge or front panel. Consult a professional for an accurate diagnosis and to assist with the repairs.

Hello - I am happy to assist. First, I will need the model number to better address the issue at hand. Thank you.

Normally it is a Heat sensor attached to the Heater Coil housing.BUT just lately I've saw one of the Coils itself come apart and ground itself to the inside of the housing. It actually checked out good. BUT the housing had to be taken apart to see the problem.

sounds like the belt has slipped

Hello - From what you have described it sounds like you either have a problem with the belt, front and/or rear bearing, or a loose connection with the motor or drum. I recommend contacting a professional to accurately diagnose the issue, the part(s) may have to be replace depending if they are worn, damaged or loose.

stuck button If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

this could mean the keypad is locked if there is one or...the door lock is having an issue and needs to be looked at by an appliance repairman

If the unit still works, it just does not dry, please have a professional diagnose the heating element and the blower assembly. Either, or, could be faulty at this time. This is not a typical DIY job so please consult a professional.

The outside might look fancy but the innards are the same as the old ones. You must have a broken center bearing.AFFINITY SERVICE MANUAL If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101
' [\[]\

Stuck key on control If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61