20 Most Recent eMachines eMD620-5133 Notebook - Page 8 Questions & Answers

you need to install audio driver ...

If you have a Install Cd for your version of windows, run it and select repair. If you are running vista, press F8 when the computer is booting and select System Restore (first one on list). If all else fails, re-install windows. You may or may not loose data based on the severity of the error.
good luck

install fresh copy of xp on different location of pc and extract files from ealier installed xp

Free one
www.avg.com

You NEED anti virus.

On some emachines you can hold down the F10 or F11 key on the BIOS splash screen that will take you to the recovery partition. Just follow the prompts and it will completely reload all the factory settings on the computer.

P.S. DON'T FORGET TO VOTE

Many drivers will not work in Vista even though they worked fine in XP. You will need to dl a new updated driver for your sound card(vista compatible) and install it. It can get involved in Vista so here is a link to an excellant howto for you and should help.

http://searchenterprisedesktop.techtarget.com/generic/0,295582,sid192_gci1255731,00.html

Try booting into safe mode then use a system restore point to a point prior to the problem. This is the easiest solutions for this kind of problem.
If you cant boot into safe mode or need further detailed instructions let me know.

try to call to your "provider"
Provider - it is company which gives facilities of Internet.

You can do this by as minimum five times way:
1) through modem
2) through LAN card
3) through WIRELESS LAN card
4) through mobile (cell) phone and USB connection
5) through mobile (cell) phone and BLUETOOTH connection

Also you may combine or switch suitable ways of the work on your discretion.
Good Luck.
Find " Internet provider"

If this is a Windows password, you will need to create a password recovery disk. Once you have the disk created, restart your PC and boot from the disk.

This site has the disk and instructions you need:

http://home.eunet.no/pnordahl/ntpasswd/

Yes it seems llike a dead battery. Have you tried removing the battery and putting it back into the laptop?

try going to windows photo gallery and selecting file>import from camera or scanner

the program that opens to run your internal camera will be the one you need to open or create a shortcut to the desktop for in order to use the camer as normal.

if this doesnt help pls, respond so i can direct you to the correct software to overide any factory installations that may currnetly be keeping your camera from being easily accessible

You can either try and force install the XP driver of this device, or you can manually set the device up as an unknown gaming device.

Thirteen quick beeps at startup on an eMachines E520 usually indicate a problem with the laptop's RAM (Random Access Memory). This could mean that the RAM is not properly seated in its slot, or it could be a sign of a faulty RAM module.

Here are some troubleshooting steps you can try to resolve this issue:

Turn off the laptop and disconnect it from the power source.
Remove the battery from the laptop.
Locate the RAM compartment on the bottom of the laptop.
Check to make sure that the RAM module is seated properly in its slot. You may need to remove and reinsert the RAM module to ensure a proper connection.
Replace the battery and turn on the laptop.
If the problem persists, try removing the RAM module and testing it in a different laptop or using a different RAM module in the eMachines E520 to determine if the problem is with the RAM module itself or with the laptop's RAM slot.
If none of these steps solve the problem, it may be necessary to contact a computer technician for further assistance..

1. Boot the computer to the boot menu: To do this, restart the computer and press the appropriate key when prompted to enter the boot menu. On most eMachines computers, this is the "F12" key.
2. Select the CD/DVD drive as the boot device: Use the arrow keys to select the CD/DVD drive and press the "Enter" key to boot from it.
3. Insert the Windows ME boot disk: Insert the boot disk into the CD/DVD drive and restart the computer.
4. Choose the "Start Computer with CD-ROM support" option: When prompted, choose the "Start Computer with CD-ROM support" option.
5. Run the Windows ME setup program: The setup program should start automatically. Follow the on-screen instructions to install Windows ME.
6. Format the hard drive: During the setup process, you will be prompted to format the hard drive. Choose the "Full" format option to erase all existing data and perform a complete factory reset.
7. Install Windows ME: Continue to follow the on-screen instructions to complete the installation of Windows ME.

After the installation is complete, the computer should be in a factory reset state and you can begin setting it up as a new system. Please note that resetting your computer to the factory settings will erase all personal data and installed programs, so be sure to back up any important data before proceeding with the reset.

Larry picks up a question from 2015 ;>) Larry Ng Feb 07, 2022 no PC model told hopeless If desktop, the jumper on the MOBO marked PW_CLR on most. Never laptops

device manager 1 of 10000 model ODD optical disk drives made, each drive made has LIMITS some only do CD ROMS BD is blue ray , FIY if missing or maked with red or yellow errors or shows up as unknown that all means DRIVER IS BAD , wrong or missiong NO PC Told so can not tell you how to fix that, lacking such a key fact . (but is at your oem makers PC support page under DRIVERS)

moved you out of monitors and into laptops, only forum. emachines full model not old like this example E525-901G1Mi windows 7 loaded day1.

• the switch is bad Lid close switch
• set wrong in power settings.
• or the driver is missing that makes this switch work.

so why not just assign the sleep mode, to auto sleep then on what does the power button do in settings, set to do nothing or set button to only sleep . (3 choices here) or let auto sleep do the work, set. set to say 5min idle. the switch is inside it deep and if you rip it out as you go there most noobs break 2 or 3 FFC cable jacks and now it is bricked and $300 mobo wrecked emachines or junk grade, made by Acer.com owned now and that maker does NOT have service manuals making service a royal Pain. best is work around the problem as I just told how. or ask any shop to fix it. they do know how.!!!