20 Most Recent Dell PowerEdge T300 Server - Page 2 Questions & Answers


Hi,

According to u I understand that the hard disk of your Power edge is faulty & need to recover the data.

You don't have say the exact problem of your hard drive. If your hard drive detect in your system Bios but you can't access Data or OS from safe mode also then try to format only the OS drive or repair the drive with your server OS CD. If you get perform it well then you can recover your data by transferring data to another external drive.


If The Hard drive doesn't detect then first try to change the cables (Data & Power)of the Hard drive. If detect it then try to access it or perform the previous job.

For detection of the Hard drive you can try to attach this drive to another system in slave or as secondary drive. If detect then you can recover data.

If your hard drive get crashed then use data recovery CD to recover data. Insert disk, install software, and recover the data by follow the option of the software.

This software is available in market.

Have another process to recover data from a crashed Hard drive. It is freezing but try it carefully. Place the hard drive into a baggy, seal it tightly and put it in the freezer overnight.The next day remove it from the baggy and put it in the external drive case.

Transfer the data from the drive before it warms too much and crashes again.

Dell PowerEdge... | Answered on Jan 27, 2011


You will need the drivers for them i had a similar problem
insted of reinstalling windows i got a very old taty keyboard and mose from a windows 95 pc
and used them till i got and installed the drivers for them.

;)

Dell PowerEdge... | Answered on Dec 27, 2010


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Dell PowerEdge... | Answered on Sep 27, 2010


The server should have came with an OpenManage CD.
You boot to the CD and it walks you through setting up arrays and installing the OS.
If you don't have the CD you can download it.
Go to support.dell.com Drivers and Downloads and enter your server's Service Tag.
Dell servers have lifetime phone support so give them a call if you need more assistance. (800) 945-3355

If this helps please vote for my solution.

Dell PowerEdge... | Answered on Sep 03, 2010


Guest

This stop code, "0x0000000A irql_not_less_or_equal" normally refers to a driver problem. So this is one of the few times where the files that the BSOD lists actually is important. Next I would try to boot the computer into safemode and reinstall/drivers related to that file to see if this make a difference.

Let me know if you have any more problems or questions

Issken
http://www.fixya.com/users/issken

Dell PowerEdge... | Answered on Sep 03, 2010


NIC teaming is useless unless you have a switch that support teaming.
However, Dell servers have free lifetime phone support ((800) 945-3355).
They should be able to help.

Dell PowerEdge... | Answered on Jul 28, 2010


go here

http://support.dell.com/support/edocs/systems/pet300/en/hom/html/about.htm

Dell PowerEdge... | Answered on Jun 09, 2010


Computer not recognizing the hard drive. Look in BIOS to see if hard drive is listed. Reload system disc/CD.

Dell PowerEdge... | Answered on Mar 14, 2016


It could be a couple of things 1. the computer Cpu fan is not working or is clogged inspect it and clean or replace.2 The power supply could be bad

Dell PowerEdge... | Answered on Jun 14, 2015


Namrata_stha,

The I912 error is referring to the System Event Log is full of events and because of this is unable to log anymore. You must clear the log in order for the Server Management controller to log any more events. Now depending on the OS installed there are different ways to clear it. If Windows Server 2k8 you would use this command - wevtutil el ' foreach { wevtutil cl $_ }
Where with Server 2003 you can go tot he Event viewer and clear it.

Let me know if this helps.

Dell PowerEdge... | Answered on Oct 01, 2014


www.hp.com/support

Dell PowerEdge... | Answered on Aug 18, 2014


Please be more specific. You haven't actually asked a question. What are you trying to do? What happens that you aren't expecting?

Dell PowerEdge... | Answered on Aug 08, 2014


You will have to get into the controlled setup in order to find out what the problem is, or you can simply hit ctrl-D and do the Dell disk diagnostics which will take an hour or more, but will give you an idea of where to start.

Logically, if it won't boot, then your RAID is probably broken. it can sometimes be repaired through either the RAID or controller setup menu, which you can see during boot.

go here, for the manuals and documentation on how to do that: http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-t105/manuals

Dell PowerEdge... | Answered on Jun 04, 2014


what is your server model? in most cases you can use the operating disc to format the server drives

Dell PowerEdge... | Answered on Apr 04, 2014


Go to start menu. click on 'control panel'. Select 'system and security". Then select 'system'. This should give you the info.

Dell PowerEdge... | Answered on Mar 27, 2014

Not finding what you are looking for?
Dell PowerEdge T300 Server   Logo

Popular Tags

38 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PowerEdge Dell

  • PowerEdge Dell

Most Popular Question

poweredge t300 server am having issues

  • Computers & Internet
Loading...