20 Most Recent Polaroid TDA-03211C 32 in. LCD HDTV - Page 3 Questions & Answers

Hello Susan, I can usually find remote codes for most brands of replacement remotes by simply using GOOGLE. Find the brand and model of your remote control, not the tv. Enter the model of the remote on google and add the word remote codes. you should find a user manual online for your remote control. Then program as necessary for your Polaroid TV.

It has 2 blown capacitors in it. Mine had the same problem. The capacitors are located at EC17 & EC18 on the top circuit board inside the tv. They cost about 1.00 a piece. You can get them at DigiKey.com. It is very easy to take the board out and have someone soldier the new ones in and then put it back together. You can fix it for about 40.00. Hope this helps. Do a search on line of what the capacitors look like........

Check and replace the back-light inverter board. Contact any service technician. Gopakumar Gopalan Google

Well ask the person you bought it from or look at the box it should say what screws or, just have a day when your doing nothing and just try screws and see if they fit. I hope I helped! :D

Check and replace the main power regulator board. Components on it have been burned due to voltage fluctuation. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/

i think its in store mode

Try this link to download the manual. http://www.helpowl.com/p/Polaroid/TDA-03211C/Research/132134?search=polaroid%20tda%2003211c%20service%20manual

Does that LED come off the main board or the power board?

chk power supply

If you wish to get more details, surf the following link. There are over two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. You can get a solution there. Type in the brand name to your device to its search box, can be located at the top right of the display window.http://electronicshelponline.blogspot.com/

I have a 3 year old TV with the same problem as shema_ross.

Try doing a factory reset. Here is a link to the manual in case you don't have one. Hope it helps. http://www.manualowl.com/m/Polaroid/TDA-03211C/Manual/230758

I hit the button on the sidea and it went to channel 17 I got it back to channe 3 but it still says no signa I do not have a Polaroid remote

If you are using the built-in DVD tray, press TV (in case you have a Cable Set-top box). Then press Input and navigate with the up/down keys to the line labeled DVD. Then press OK. Finally press play on the Polaroid TDA-03211C remote or on the side of the TV. The remote play button is in the center of the row below the row with skip reverse and skip forward buttons. If you are using a different DVD player, press the input button and then the up/down arrows to get to the input for your DVD player. Then press the DVD button to control the DVD player. If you are using a universal remote control, then you may need to program it to the TV and the DVD player separately. (Some universal remotes may only support the TV functions of this TV.) Make sure that your universal remote has an input button that works. You may need to try multiple codes for Polaroid TVs.I hope this helps. Cindy Wells (note: the DVD must be correctly installed so that the printed side (label) is facing the front of the TV. If you do not get a response, try the disc in another DVD player. The DVD player laser tracking can fail without warning. If the disc plays in other units, this may be the problem.)

More than likely your power supply needs two electrolytic capacitors, 10MFD @ 450 WVDC. If you find the capacitors on the power module to the top of the metal enclosure inside the tv, they will probably appear to have swollen tops.