Element Electronics FLX-1910 19 in. LCD HDTV - Answered Questions & Fixed issues

Switch position of televisions trial and error situation and let me know the result

Is your Headphones ok - Have you tried them on something else?

Is the plug on the headphones of the correct type and size?

If you mute the TV or turn down the volume - does this affect the headphone volume?

Also, Do you get sound out of the Headphones at the same time as the speakers?

If the above checks out to be OK - You may have a faulty Headphone socket in the TV.

Normally when you push headphones into a TV it usually pushes a piece of Metal in the head phone socket that disengages the speakers
The socket can go faulty

www.retrevo.com/ visit this site to download. http://electronicshelponline.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

Contact the manufacturer and download any, if any, firmware updates.

http://www.retrevo.com/support/Element-FLX-1910-TVs-manual/id/4540dj093/t/2/

You have selected an input on the display that is not getting any signal that the display can recognize. Press the source button either on the set or on the remote until you get a signal.

Refer its user manual for details.

Element FLX 1910 Manuals Support and Troubleshooting TVs Try this link to download the manual in pDF. http://electronicshelponline.blogspot.com/

If you already have the vcr connected to the TV, then you'll need to find which input the vcr is connected to on the TV. Turn the vcr on and put a movie in it to play. Use the TV remote and find the button that sys 'input ' or source'. Press the button and there should be a list of inputs. Scroll through them until you see the movie playing.

If you wish to get its original remote control, you have to contact the authorized service center for Element. If you wish to buy one universal remote control, you must first check out, which brand remote control have setup codes to Element TV. Setup code list will be attached to every universal remote control. If you wish to get more details, check the site linked below. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Two digit, three digit, four digit and five digit setup code list to different models remote controls are given. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name and model number to your device into its search box at the top right of display window.http://electronicshelponline.blogspot.com/Check out the site, and see which brand has setup codes to your TV. Check this site too.http://electrohelponline.blogspot.com/

element electronics Flx-1910 19in'' not on

Hello,This is a very common issue with that model. There are filter capacitors on the power supply board that fail and keep the back light power section from starting up correctly so you get no picture on the screen. The FLX-1910 uses the same power supply board of the Polaroid TLA-01911, below is a link to information showing how to repair this power supply board. http://www.ccl-la.com/blog/index.php/repairing-a-polaroid-tla-01911c-with-a-bad-power-supply/

I was having the same problem with the constant blue screen appearing with different error codes. Here is how I fixed the problem on my Elements 19": I did a channel search. I found there were 68 analog channels and 274 digital channels. On a hunch, I went into Skip Channels and checked off all the digital channels since I have basic cable. Although the tv is HD and did pick up the basic HD channels, I choose to skip those two since I do not have a cable box on that tv and only the basic channels were in HD (about 8). I watched my tv for two hours and blue screen appeared once every 30 minutes, but the next day it did not appear at all. I concluded that those error messages are because those channels are blocked and we have not checked them off to be skipped. When checking the Skip Channels, as you highlight each channel it will either come in or it will not. You will find the "Blocked Program" errors are coming from channels that do not come in and you will need to skip those channels. I hope you can understand how I solved my blue screen problem on my Elements tv. Good luck!

this is the manual http://bit.ly/bJFXFO

You may need a new main unit for the tv. Try the link below. http://www.shopjimmy.com/catalogsearch/result/[email protected]

The replacement SMPS must confirm to the voltage/current sepcifications required for the TV and so it is best to get the same type from the dealer.
However if you are trying to get a universal type the output voltage and the protection should be of correct value or else it can further damage the motherboard.
finally if this was a lightnening strike please confirm if the mother board is working if not investing on a new SMPS should be reconfirmed.
Tips on SMPS repairs click ON:

http://www.fixya.com/support/r5826301-working_switch_mode_power_supplies

How to unblock a renoir vision quest tv when it says program blocked?

Hello,

One can buy a television and within two weeks, it goes bad, it depends on the quality of the components in the television and how it is being used. Your television lasting for about 4 years means its been used carefully and wisely. And for that you are a good user of your electronic.

There seem to be a problem with the television that is why it is giving you such problem. First of all, you need to know that once there is a component in the unit that is about to go bad, that is when it comes up with such problem.

The most likely causes of this kind of problem is either a capacitor on the power supply board that is about to go bad, which is caused by excessive heat or voltage fluctuation, or the lamp is about to go bad.

You will have to have a repairman run a check on these components and then we will be able to tell the best solution for the television. It should not cost much if it is the lamp or the capacitor that is faulty.

Hope this helped.
Goodluck
Elect_Comp