Element Electronics FLX1911B 19 in. LCD TV - Answered Questions & Fixed issues

have you emptied the rubbish bin lately ? Apple systems keep the files deleted previously still on the hard drive but does not show them to the user as they are displayed only in the rubbish bin. This may be the cause of your lack of space.

Maybe try unplugging t.v. and heavily washing the controls area. if you do this do not plug the tv back in until the washed area is excessively dry.

Check and replace all micro-switches at the pane buttons. You ahve to open the TV to replace it. Contact any service technician. Gopakumar Gopalan Google

Tv won't turn on

TvPartsGuy.com carries lots of original pedestal stands for LCD & Plasma Tv's.https://www.tvpartsguy.com . use coupon code: fixya10 for 10% off your stand.

Testing remote control: The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera's Lens (Digital Camera can detect IR), you should see flashing light on the camera's screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals. Parts: www.shopjimmy.com www.remotes.com http://www.remotecontrolscenter.com http://www.newremotecontrol.com/ http://www.replacementremotes.com

http://www.newtvremotes.com

http://www.everytvremote.com/

Grab a flashight and shine it on the screen -if you can see a dark picture you need an inverter board (more than likely) if you cant i'd investigate the main board. if you have no electronic experience I'd take it to a qualified electronics tech.

Thanks,
Michael

Sometimes the remotes have a hard time programming to the tv. Below is the link to the steps for a power scan. Instead of needing a code to program the remote, the remote will scan through the codes on the tv until it reaches the one that works. I hope that this helps!!!!

http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

You May Try ProView Codes and they are Manufactured in the Same Factory in China

Two capicators on the power supply fail. C300 (680uf 10 volts) and C303 (1500uf 10 Volts). With a little electronics no how and a soldering iron you can have it up and running in a couple of hours. Parts at Digitkey (P12365-ND) and (493-1500-ND) Hope this helps.

Hi ya
I had the same problem just today with my Goodmans GTVL26W8HD TV I was at it all day trying to get it to turn on. It was like it was stuck in stand by mode, Until my partner opened it up and unplugged the control panel at the top of the TV ( The manual control buttons ) now it works via the remote control . He does stress however thats its extreamly dangeroue to mess with TV;s as the electrical current in a TV even when unplugged can Kill , So if you don't know what your doing leave well alone and get someone who does know what they are doing to do it for you
Good Luck :-)

Check the power source,after that still dead.Must replaced the power board it dead.Tries Shopjimmy.com,Ebay.com for power board part.

I have a 22inch element TV. just 1 year old. When it is turned on picture fades in and out.still have sound.it is connected to cable.

the sensor is out take it to git repared

lik2brew, Well here goes!! Your LCD panel, same as lcd panel in computer MONITOR, requires a little more than 120vac from the wall to create the cool, crisp, colorful images you see on the screen. It is my best GUESS, that your unit has a "FAILED" SMPS, or is "IN SHUTDOWN MODE" trying to save itself from having a catastrophic nonrecoverable event! e.g. sparks, smoke, fire. The SMART "switch-mode-power-supply" is designed to detect FAULTS with itself and other peripheral circuits. Your LCD TV is no different than the CLASSIC "BLACK-SCREEN of DEATH" that thousands of 14" to 32" LCD computer monitors suffer from!! Your set just has 2 more things to go wrong! A tuner, and audio processing circuits. While your waiting for the HOPS and BARLEY to ferment, surf over to YOUTUBE and view some of the longer video clips of typical "LCD monitor disassembly" and "LCD monitor repair" and find out what LCD owners do to fix them or to who they "farm out" the repair work to.!! If your screen had nice, bright, crisp, colorful images displayed on it just before the BSoD hit, then there is a good chance of effecting a lasting repair to the unit. If this was of some interest to you please rate on fixya. 12fixlouie

Basically any damage occurs on the screen itself, the screen can only be replace as a fix. There is no way a damaged screen because it like glass. Replacement screen part would cost more than the TV is worth. It's cheaper to buy a new TV at this point.

There a button call SAP in ur remote turn that off or goes in ur menu find captioning menu should have it as an option the menu listing.

Turn off the text mode in the closed captioning menu.c/c button

If it does this on your tv channels and channel rescan doesn't help, it is probably a bad tuner.

Ok, I am having the same issue. I just bought my tv - same model at the Target Black Friday sale. Can I ask, did yours make a low humming noise before you changed it out. I still am within my 30 day exchange policy, so I am thinking it would be wiser just to exchange it... but my concern is, would I get one with the same problem (or worse) in exchange?