Element Electronics FLX2211B 22 in. LCD TV - Answered Questions & Fixed issues

keep your reciept throughout your warranty period.

There is some short circuit at its main board. Contact any service technician.

I have the same problem with my 360 i am just going to by a new tv i cant find the remote code. or any thing and the hdmi port don't work that's my answer this TV sucks and it is ****..

First place to look if total dead is inside for a fuse and then examine the power board inside for any puffed up filter caps.

Check its speakers first. It found OK, check and replace damaged component/s in the audio output card.

Try e-mailing their service dept. murf427

My Element ELCHS261 will not turn on at all. The only thing it does is the red light will turn to blue but no sound and no picture. My troubleshooting items have been changed the batteries in the remote then I unpluged the power for for 30 minutes and still nothing.

Element TV ELEFT422 can be controlled by Sony BluRay Player remote model # RMT-B118A by entering the code 04 (same as Goldstar and LG TVs)

I've run into this same issue. Although not a complete fix, I was able to program the tv with a basic universal remote. Try using the Goldstar remote codes. While I'm unable to use the channel buttons, I can change channels manually and turn the tv on/off and use the volume button. Again, not a fix, but a work around for now.

Hi,

To watch a DVD your player needs to be connected to the TV using a scart or RCA connectors (red, yellow and white) depending on the type of connections available to you. The easiest way to connect the DVD player to a television is via Audio/Video connections that are usually supplied with it.
Next plug in your DVD player and power it up.

Next use your remote to select AV 1, 2 or 3 or HDMI - depending on the input you used at the back of your TV. Insert DVD and play! For example, if the DVD player is connected to the SCART socket labeled Av1, then you need to select Av1 with the remote.

The use of your DVD player is not dependant on the dish receiver - it works on a serarate input direct to the TV. Connecting your DVD player in this manner direct to your TV will not affect your cable or antenna connection to your television.

Thanks for using FixYa. Please remember to leave a vote for the solution.

Ur tv have a dead board that call the LCD inverter board.This LCD inverter board it is a Long board.It only job are to provided a backlight to the tv LCD screen panel to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy a long refurbish LCD inverter board for the replacement.

Try to change the setting of your picture size in the AV format.

The electroliytic caps on the power supply module needs change, or ust replace the power supply.

Turn your TV off and let it rest for 15 minutes. Doing so will cool the screen down, making the screen safe to clean.
Use a soft cloth with a mild soap solution to clean the TV. I recommend to avoid use a cleaning solutions as it may damage the screen in the long run.

Please let me know if you require further assistance. Thanks for understanding.

Try ebay for universal remotes or if you require the original type, you may have to track down an agent for your make of TV. Prices vary.
Hope that helps.

New TV's or new problem? If these are new TV's it could be that they are set on something other than the Cable Input Option.

On your remote press the input button to get an onscreen menu and set them to cable.

Otherwise, if you installed these yourself recently, recheck all connections to make sure they are set up correctly, using the manuals that came with the TVs. My guess is that you may have connected them incorrectly to/from the cable input device.

If these are not new TVs and this is a new problem, take a look at your outside cable box. Occasionally one can have a problem with an input cable. If that is the case, the cable company needs to be called to replace or repair.

Thank you for using FixYa.

I had a similar problem with my 42 in Philips LCD HDTV.

Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors on the PSB. Many major electronics companies Philips/Magnavox, Sony, Panasonic, and others were sold capacitors that failed in 2-5 years instead of 10-20. The capacitors fail prematurely due to a lack of preservatives. Unfortunately, they were installed in all sorts of devices and cause a wide range of failure problems.

Here are some options for you.

1. Have it fixed by a professional $$$$$$$??????? (Is it under warranty?)

2. Open your TV and find PSB. (The board that the power cord plugs into) Check for faulty caps. If you find some (bulged or leaking) bad caps replace the entire board. The entire board costs around $250 right now because they are in high demand right now. They can be found at tv-part.com but supplies are limited. I would definitely shop around though.

3. Remove and then replace individual faulty caps. This takes some soldering skill.

Caps are inexpensive and if you can take care of it yourself it will save you hundreds.

This may be your problem. If you determine that it might be.

I have a Tip/How TO tutorial on this site that may also help. It gives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. Here is the Link: Fixing the Philips Turns/shuts off on its own problem. I'm working on uploading pictures to help guide people though the process as well. Let me know if I can do anything to help.

Hope this helps and if it does please rate it accordingly. Good luck.

Hello,

your TV is having a power problem. The power supply board is defective that's why the TV won't power up. Its receiving power but it cannot transfer the current to the necessary part of the TV because a capacitor, diode, etc may have been faulty. Until these bad components are replaced, the TV might not come on.

The problem may have come as a result of power surge or irregular power supply/excess voltage entering into the TV.

If you know about electronic repairers, I would suggest that you open the TV and read the power board/panel with a meter, detect the bad component and replace it.

If you don't know about electronic repairers, take the TV to the nearest repairman to fix the fault for you.

I wish you good luck.

Change out all the capacitors on the power supply board.

Any computer cord will fit this model tv.