20 Most Recent Emerson LC320EM8 32 in. LCD TV - Page 2 Questions & Answers

Register with Government.

First thing to check is the video cable into your TV. Replace it with another. If that doesn't work, go into video settings on the TV and make sure the color setting is correct. If neither of these do the trick, the TV is bad.

it tells you in the manual not spray the screen with any cleaner. there are a few componets water can drip into. unless you understand how to work on a power supply it is going to need a tech for repair.

The best brand is one that you like to use. If in doubt get a name brand like a Samsung.

For LC320EM3F I used 694. I read somewhere that Emerson makes Funai TVs. This was listed as one of their codes. Worked like a champ.

Do a reset to this TV and check. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. If a Hard Reset do not help you, the main board to this TV is faulty.

Try a reset to this TV first. If it do not help you, contact any service technician. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

0045 0049 0094 0101 0107. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls.Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order.Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

Hi, I own the same TV and had the same problem. It's the #1 plaguing issue with flat panel TVs made by Funai corp. Emerson is made by them. Normally, when this happens, the TV goes into " Protection Mode " because of a failing circuit board.

The most common thing to go out on flat panel TV is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board. But, I can't say it's 100% the problem because I can't actually look at the tv over the internet. I can only make guesses with the symptom. I'm willing to bet you have the same problem like mine. One of six Inverter Transformers when bad on my Power/Backlight Inverter Supply Board. I replaced it and it works fine again.

You have a few choices:
1. You can try leaving the TV unplugged for 30 minutes so the TV can reset itself.

2. If you have some electronic experience, if you can find and purchase a Service Manual at Tvtechcenter.com: http://www.tvtechcenter.com/xcart/search.php?mode=search&page=1 It will help you diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists.Usually, cost under $6. And most cases the new part cost less than $15.
http://www.partstore.com/Part/Funai%20Corporation%20Inc/Funai/LTZ2PC0MS008.aspx

http://www.encompassparts.com/products/?LTZ2PC0MS008

3. Pay a TV shop to do the repairs. It maybe costly, but get an estimate of how much they will charge. That way you can decide if it worth repairing or replacing the whole TV.

Main board fault. Shorted component/s at it. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

The most common problem is the Power/Backlight Inverter Board. There are 6 mini transformers on the board, one goes bad and the TV will turn itself OFF automatically for " Protection Mode". Replace the whole board or replace the bad mini transformer.

Part number#
Whole board, BA71F0F01042
Mini Transformer, LTZ2PC0MS008

Check its picture settings first. If color intensity is decreased to Zero, there will be no color to picture. Get into its picture set up option, and check this first. If it is found normal, check the system settings, such as PAL, SECAM, NTSC etc. If there is an option to select the system settings to "Auto" (if your TV is a multisystem one, this option will be there), select this option"Auto". If nothing of above said help you, contact any service technician. Gopakumar Gopalan Google

Connected to what?

Ps3 remote is bluetooth. The TV needs infrared remote