20 Most Recent
Fitbit One Activity Tracker, Burgundy - Page 5 Questions & Answers
Mastercraft rotary tool not turning on
Did you blow a fuse, or trip a circuit breaker? Often an overload like a stuck motor indicates there is a circuit being opened. If you know how to get inside, check the brushes, but I am inclined to suggest looking at a possible fuse blown in the power circuit, possibly in the power strip you use to plug in multiples.
Bosch pof400A router. How can I remove the base plate?
I found a diagram of one version of the Bosch POF 400A router here:
https://www.powertoolspares.com/bosch/router-pof-400-a.m/0603261106/spares . It looks like the two posts are part of the base plate; look for two socket head cap screws at the top of the posts. These hold the compression springs on the posts. These are part 46 on the diagram. The listed size is DIN86-AM6x16-5.8".
I hope this helps. However, I don't think this model is designed to have the base removed often. The housing may need to be separated to find the cap screws. See the diagram for how the housing fits around the motor of the router.
Cindy Wells
How to change bit on my dremel?
most dremels [didnt specify which model ] push little button at top and use wrench and loosen usually can insert shaft down collett and tighten nut
How many Types of Power Sander?
Power sanders are really helpful tools that help the sanding job done in fewer minutes but usually takes hours by hand. The amount of effort requires while removing old peeling paint depends upon the type of sanders is used. If you pick a wrong tool, all your effort may go in vain. Different sanding machines have different specific utilities.
more details
Category Sanders
OPERATING MANUAL FOR ZURLAN WIDE BELT SANDER
This link might help: https://www.google.com/search?hl=en-US&ie=UTF-8&source=chrome&q=MANUAL%20FOR%20ZURLAN%20WIDE%20BELT%20SANDERontact Zurlan or Contact zurlan directly to request the manual.
Dear everybody!
I need a little help.
I have a Paslode Im90i type nail gun.
Last week on my nailer led going to
flashing yellow, ok it need a service, i made it.
After that i tried to reset the gun, but no way I don’t know, i follow the users guide step by step, But the gun doesn’t reset, in turn it working perfectly.
So why i can’t restart the green light,
Or have another way if i reset it.
The steps which i did, i took it out the gas cartridge And the nails, turn on the gun flashing the yellow led turn it off, i pressing down the nailer, i pulling the trigger Turn on again the gun i waiting the fan is starting I let me go the trigger and 3 times i pull down and firing the gun within 5 sec.
What i doing wrong?
The reason the light isn't green is because your battery is not fully charged - if you have charged it, the battery may be at the end of its life.
The reason it is not firing unless you depress the nose several times is because your fuel cell is spent - check the expiration date on the bottom of the fuel cell.
Not finding what you are looking for?