JBL CS 60.4 Car Amp - Answered Questions & Fixed issues

0helpful
1answer

I have an 4000 watt 6 channel lanzer amp goes into protection mode as soon as it powers on

Could be a bad ground i wish u lived around me I run my own audio installation business
6/23/2022 4:40:20 AM • JBL Car Audio &... • Answered on Jun 23, 2022 • 88 views
0helpful
1answer

I have a JBL 6-disc changer2002 Camry. CDs won't eject. Matter fact when CD option is chosen CD player does not even work at all. Any helpful information would be greatly appreciated!

It sounds like you have a disc stuck and it's overriding any commands. I would put the key to acc. Then I would unplug the cd changer from the back of changer and after a min or 2 plug it back in as you hold down on the eject button
12/13/2021 3:59:40 AM • JBL Car Audio &... • Answered on Dec 13, 2021 • 269 views
0helpful
1answer

How do I advance my jbl 3 disc cd player in my 2008 SOlara

Page 168 of the manual onwards.

2008 Toyota Solara Owners Manual and Warranty - Toyota ...

www.toyota.com > owners > resources > solara > 2008
Find everything you need to know about your 2008 Toyota Solara in the owners manual from Toyota Owners. ..
1/31/2021 10:05:50 PM • JBL Car Audio &... • Answered on Jan 31, 2021 • 61 views
0helpful
1answer

Mh JBL MR-5 on my boat does not work anymore. Where to replace or how to fix?

No user serviceable parts! If not working just replace!
5/14/2020 3:49:38 PM • JBL Car Audio &... • Answered on May 14, 2020 • 110 views
0helpful
1answer

Jbl a3001 goes into protect mode when bass hits. Wrkd then just stopped. Amazon replaced the amp with a new one, new wire, loc, rca, grnd locatn. No dice. Ideas?

Bad or shorted voice coil on sub maybe. If you have two subs try them one at a time to see if it goes into protect mode. Whatever sub does it is bad.
10/4/2016 3:17:03 PM • JBL Car Audio &... • Answered on Oct 04, 2016 • 1,553 views
0helpful
1answer

Advice for car speakers for my pioneer player DEH1590UB

It is very dependent on your vehicle and whether you are using the built-in amp of the head unit or a separate amp. Ideally, I would recommend a good 6.5" component set.
9/20/2016 8:16:20 PM • JBL Car Audio &... • Answered on Sep 20, 2016 • 341 views
0helpful
1answer

I have a 94 cougar with a 10 disk cd changer in the trunk. I am not sure how to get the cd's to play?

Lester, probably has a remote.
3/7/2016 9:50:06 PM • JBL Car Audio &... • Answered on Mar 07, 2016 • 361 views
0helpful
1answer

Why does my inline fuses keep blowing on a jbl gto 14001 amp

You need to calculate the amount of amps being driven through that fuse + the amount you need to feed the amplifier. In my Volvo S40 and V70 I had no problems driving an amplifier of the rear power connector, but on my Honda S2000 however I had to create a different connection all the way to the battery line for a smaller amp (connection as in cables, condensers/filters and fuses).
2/22/2016 7:50:24 PM • JBL Car Audio &... • Answered on Feb 22, 2016 • 336 views
0helpful
1answer

Tell me how good of an amp this really is? Jbl grand touring gto1201.1model 2 not sure on the watts or class..

single channel about 1kW output power. About $250 when new. Specs here http://www.crutchfield.com/S-dVhyYWWFkBd/p_115GTO1201/JBL-Grand-Touring-Series-GTO1201-1-II.html
8/26/2015 8:51:58 PM • JBL Car Audio &... • Answered on Aug 26, 2015 • 991 views
0helpful
1answer

I have to replace a sub in a jbl encounter and the wiring is yellow and orange. Which is pos, and which is neg?

Use a C or D size battery. Get two pieces of wire. Strip each end. Wire one end of each to the sub. The other ends you will place one on the top of the battery and, one on the bottom of the battery. If the cone moves outward, you have the correct polarity. If the cone moves inward(toward the back of the speaker) then you have the polarity backwards
7/3/2015 1:16:03 AM • JBL Car Audio &... • Answered on Jul 03, 2015 • 313 views
0helpful
1answer

My JBL DCR 600 head unit keeps cutting out after I turn the power on

try checking your speakers and/or speaker wires for grounds or shorts. If they check out fine, you have an internal problem with the amp, more than likely blown transistor(s).
6/1/2015 7:21:04 PM • JBL Car Audio &... • Answered on Jun 01, 2015 • 245 views
0helpful
1answer

My jbl mr 18.3, when is turned on it does a blip while playing a station/cd. Is it an electrical problem? It's an intreruption of about 1 second in the sound. Thanks

my computer does that,it is a motherboard issue,so,it is the jbl that needs repair
4/22/2015 5:57:05 PM • JBL Car Audio &... • Answered on Apr 22, 2015 • 156 views
0helpful
1answer

I have buy JBL four way channel amplifier 3 months before. Nearly 2 times my amplifier is not working. Red light is glowing even wen ma car is in off conditions and amplifier is not working. help me

Hi, Looks your amp has gone into "protect" mode, the first thing I would check is the fuse, should be under the bonnet (hood) about 15 cm's (6" or so) from the battery. I've found a couple of sites that may be able to help with your problem. 1. > How to Troubleshoot Dead Sub Amplifier Car Audio 2. > Amp in Protection Troubleshooting Trust this helps, regards Alan.
4/12/2015 6:59:30 AM • JBL Car Audio &... • Answered on Apr 12, 2015 • 518 views
0helpful
1answer

My jbl gto1202d has no sound

is it connected properly if so chances are it burnt out
2/19/2015 2:20:24 AM • JBL Car Audio &... • Answered on Feb 19, 2015 • 95 views
0helpful
1answer

My jbl gtx500 amplifier will not shut off.

Unplug remote wire and see if it powers down
2/8/2015 9:10:09 AM • JBL Car Audio &... • Answered on Feb 08, 2015 • 149 views
0helpful
1answer

Jbl radio A56840 loses station presets and no volume

Toyota vehicles have a fuse in the kick for the amp and sometimes there is located under the hood ... This is the switch turn on for the amp ... And 1 of the fuses is most likely the memory or constant power. B sure to check all fuses ... I do not have AllData pulled up . If the fuses are all good the amp or radio may be bad ... Or both ... Be sure to check all the fuses ... Many times I get clients that say allthe fuses are good and it is still the first thing I check ..Usually is a fuse ..Good Luck
1/27/2014 2:35:19 AM • JBL Car Audio &... • Answered on Jan 27, 2014 • 205 views
0helpful
1answer

Amp protect mode

its broken. sell it for parts and buy a new one.
11/15/2013 7:06:05 AM • JBL Car Audio &... • Answered on Nov 15, 2013 • 89 views
0helpful
1answer

I have a 2005 toyota prius with a JBL radio cd player won't power on

there maybe a reset button under the face plate
11/7/2013 1:30:35 AM • JBL Car Audio &... • Answered on Nov 07, 2013 • 275 views
Not finding what you are looking for?
JBL CS 60.4 Car Amp Logo

Popular Tags

1 questions posted

Ask a Question

Usually answered in minutes!

Top JBL Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

John
John

Level 2 Expert

510 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Are you a JBL Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...