20 Most Recent
Sharp 32SC260 32 inch TV - Page 3 Questions & Answers
My sharp model LC-70EQIOU WONT RESPOND TO REMOTE COMMANDS THE POWER LIGHT FLASHES NO PICTURE, NO SOUND
If your Sharp TV is not responding to remote commands and the power light is flashing, here are some steps you can try:
- Check the batteries in the remote control and replace them if necessary.
- Try using a different remote control to see if the issue is with the remote or the TV.
- Unplug the TV from the power outlet and wait for a few minutes before plugging it back in. This may reset the TV and resolve the issue.
- Check the connections between the TV and any external devices, such as cable boxes or DVD players. Make sure the connections are secure and the cables are not damaged.
- Try using the buttons on the TV itself to see if the issue is with the remote control.
If these steps do not resolve the issue, it is possible that there is a hardware problem with the TV that may require professional repair.
14v-w70m sharp tv flyback
I'm sorry, I'm not sure what your question is. Can you please provide more information or clarify your request?
Can I force HDMI on a sharp 50LE652E?
Yes, you can force the TV to display HDMI by accessing the input selection menu. Here's how to do it:
- Press the "Input" or "Source" button on your Sharp remote control. This should bring up the input selection menu on the screen.
- Use the arrow buttons on the remote to select "HDMI" as the input source.
- Press "OK" or "Enter" to confirm the selection.
- The TV should now display the HDMI input signal from your device.
If this doesn't work, you may need to check the HDMI cable and make sure it's connected properly. If the cable is damaged or faulty, it can cause issues with the HDMI signal.
Regarding the eeprom problem, it's not recommended to modify the TV's firmware or eeprom unless you're a qualified technician. If you suspect that the TV's firmware is causing the issue, you should contact Sharp customer support or a professional repair service for assistance.
Have a Sharp tv model # LC-40LE431U. It has no video singal from any sourse inputs.Your help is needed, Thank You.
It sounds like your Sharp TV model LC-40LE431U may have a hardware malfunction. Before you start troubleshooting, try unplugging the TV from power for at least five minutes and then plugging it back in. This could reset some of the internal circuitry, which could resolve the issue. If that doesn't work, then you'll need to check all of the cables and connections to ensure that they are securely plugged in, as well as check for any signs of corrosion or damage. If everything looks good there, then it's possible that you may need to replace the main board or another internal component.
Sharp LC-50UE630X keep restarting at Android Logo
Hi there,
A little late in answering and you may have figured it out, you should have an option to select antenna or cable box. Select cable box and and make sure you have your source (laptop, Roku etc) plugged in. This should lllow you to use the TV as a monitor. It is what I do with my 65" Sharp Aquos.
Reset sharp 14v w150 m password
Resetting the password on a Sharp 14V-W150M projector can be a bit tricky, as the process may vary depending on the specific model and software version. Here are a few steps you can try to reset the password:
- Check the manual: The first step is to check the manual that came with the projector. It may have instructions on how to reset the password.
- Use the default password: Some Sharp projectors have a default password that can be used to reset the password. The default password is often "admin" or "password". If you're unable to find the default password in the manual, you can try searching the internet for it.
- Contact Sharp support: If you're unable to reset the password using the steps above, you may need to contact Sharp support for assistance. They may be able to provide you with a reset code or assist you with the process.
- Factory reset: If all else fails, you may need to perform a factory reset on the projector. This will erase all settings and restore the projector to its original factory settings, including the password. The factory reset process may vary depending on the projector model, so it's best to consult the manual or contact Sharp support for specific instructions.
It's important to note that a factory reset will erase all settings and restore the projector to its original factory settings, including the password, so it's best to have a backup of all important settings. It's also important to note that attempting to reset the password can be tricky and if you're not comfortable with this task, it's best to consult a professional technician or Sharp support for assistance.if i was able to help my cashapp $ralphpapi thank you have a blessing day
How to Reset sharp 14v w150 m password
Resetting the password on a Sharp 14V-W150M projector can be a bit tricky, as the process may vary depending on the specific model and software version. Here are a few steps you can try to reset the password:
- Check the manual: The first step is to check the manual that came with the projector. It may have instructions on how to reset the password.
- Use the default password: Some Sharp projectors have a default password that can be used to reset the password. The default password is often "admin" or "password". If you're unable to find the default password in the manual, you can try searching the internet for it.
- Contact Sharp support: If you're unable to reset the password using the steps above, you may need to contact Sharp support for assistance. They may be able to provide you with a reset code or assist you with the process.
- Factory reset: If all else fails, you may need to perform a factory reset on the projector. This will erase all settings and restore the projector to its original factory settings, including the password. The factory reset process may vary depending on the projector model, so it's best to consult the manual or contact Sharp support for specific instructions.
It's important to note that a factory reset will erase all settings and restore the projector to its original factory settings, including the password, so it's best to have a backup of all important settings. It's also important to note that attempting to reset the password can be tricky and if you're not comfortable with this task, it's best to consult a professional technician or Sharp support for assistance.
if i was able to help my cashapp $ralphpapi thank you have a blessing day
My Sharp television LC-45D4CU has no external speakers. I plug in my audio out and no sound on my sound bar. Sound still on TV.
If your Sharp LC-45D4CU television is not producing sound when you connect an external speaker or sound bar to the audio out jack, there are a few potential causes and steps you can try to fix the issue:
- Check the audio out jack: Make sure the audio out jack is clean and not damaged, and that the connection to the external speaker or sound bar is secure.
- Check the audio settings: Make sure the TV's audio settings are set to output sound through the audio out jack. You can check the settings in the TV's menu or user manual.
- Check the external speaker or sound bar: Make sure the external speaker or sound bar is turned on and set to the correct input. Also, check the speaker or sound bar's connections and make sure they are secure.
- Check the cables: Make sure the cables connecting the TV to the external speaker or sound bar are not damaged and are securely connected.
If these steps do not fix the issue, there may be a problem with the TV's audio out jack or the external speaker or sound bar. In this case, it is recommended to contact Sharp customer support or a TV repair technician for further assistance.
Regenerate response
Not finding what you are looking for?
