Top 10 Panasonic KX-T7633 Corded Phone Questions & Answers

This is what worked for me :
program, **, passw 1234, you change the time/date, and then to store, press Autodial or store button.
Hope this helps!
Caroll

Since, by default, you have either 4 or 8 lines minimum, do they appear on other phones and is there anything on the buttons? Press PROG and line 3 button. If the display shows CO 003, you have another problem. If they show blank, dial 0 3 and press ENTER. Do the same for line 4 (using 4, of course).

Carl

I have a KX-T7633 and I want to be able to forward calls to my mobile after approx 3 to 4 rings when not answered

many thanks

Fintan

CLICK HERE for your owners manual in PDF format.

This phone does not have voicemail capabilities. Your company's voicemail system is seperate.

You can find Voivemail notification settings on page 10 of the manual.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

If it's a Panasonic brand voice mail, when it answers, dial #6 * and your extension. Now you can put in the password.

Carl

First make sure that your headset is really compatible with the Panasonic phone. After plug in the headset to phone then u need to enable the headset mode. To do this:
1) Press PROG.
2) Press program no. 61 (headset mode) and then press ENTER or STORE.
3) Press selection no. 0=OFF, 1=ON headset mode and then press ENTER or STORE again.
4) Press EXIT or PROG.

YBC (/\)

1) Press PROG button.
2) Press CO or INTERCOM button twice. Choose between 1-30 type of ring tones.
3) Press ENTER or STORE button.
4) Press EXIT or PROG.

Hey refer to the manual for more details:
http://www.fixya.com/support/p123989-panasonic_kx_t7633_corded_phone/manual-7455/page-13

YBC (/\)

If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system.-
From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook:
1. Press PROGRAM * * or PROGRAM * # followed by the system password ( default is 1234).
2. Now press 004 and then ENTER.
3. Enter the extension number you want to change.
4. Enter the name (the same way as texting on a cellphone)
5. To save the changes press AUTO DIAL / STORE.
6. To go to the next extension press NEXT on the screen.
7. Lift the handset and put it down to exit program mode.

Actually, the light is on because there ARE messages, just not from the Voice Mail system. Press MESSAGE and look at the display. The 3rd soft key will let you CLEAR the message. When all of them are cleared, the light will go out.

Carl

What happens when you dial 165 on the intercom? If you get voice mail, then try dialing 7104 165 # on the intercom. That sets CF-No Ans to voice mail for your set and the FWD/DND button should light solid (or not, it's a program option) or flash. If you dial 7101 it should turn on Do Not Disturb (7100 cancels). In DND, the FWD light should flash.

Once you have set these two conditions up, the FWD/DND button has 3 states, FWD, DND, and OFF.

Carl