Panasonic KX-T7633 Corded Phone - Page 7 - Answered Questions & Fixed issues

In program no (620) enter all the extension nos which you want to ring in group 1. Then in program no (450) enter the floating no of group 1. You will get the floating no in program no (623).

The password can be reset from the sytem owner's mailbox (999). It's one of the options dealing with editing extensions.

Carl

If there were no messages, then the light would be off. A simple concept.

Messages can be left from someone dialing your number and pressing either MESSAGE or dialing 4 after the number. Call someone inside and try it.

Now, on your own phone, press MESSAGE and look at the display. It will tell you where the message came from and the 3rd soft key under the display will say CLEAR. Press it and keep doing that until you have no messages left.

Carl

Tough to do, especially if you read the directions. It requires a 7636 or equivalent.

Carl

The first thing you need to do is press PROGRAM and the lit button. Is it really the extension of the person who is always lit? An unconnected digital port does the same thing, so you could have a misprogrammed button. To reprogram the button press PROGRAM the button and dial 1+ext number and STORE.

The other thing is that certain versions of software behave differently. We still have some verson 2's and 3's that show busy, but the 5's don't.

Carl

From the phone, press PROGRAM 61 ENTER and 0 ENTER. Somehow, you've turned on the HEADSET option. This turns it off.

Carl

Exactly what are you programming under the button and are you putting an ACCESS CODE in the number? When you go to the intercom, try dialing "9" or whatever you use to get an outside line. If you use a special line to dial out because you're calling a mobile, then you need to dial 80x instead of 9.

Just an idea.

Carl

You need to go into system programming
Do Not lift handset
Press * * 1234 ( or try *#1234)
Enter 000
Use arrow keys to move cursor or press NEXT (in the screen) to move to next input selection
Press STORE when complete

Start by pressing ** and see what the display shows. If it doesn't show anything but beeps, then you have the wrong phone. Try looking for extension 101 or the first phone in the system.

When you find that phone and press program **1234, you'll go into programming. Dial 004 and press ENTER. If you press ENTER again, you'll be looking at extension 101, or you can dial an extension and be looking at a name. Now you spell out the name on the keypad using the letters and the arrow key if necessary and press ENTER (the center of the Navigator button) to store the name. Notice that the 4th time you press a 3 letter ALPHA key, you will get lower case letters. Punctuation is under the 1, * and # keys and Q appears under the 1 and 7 keys :-)

Next steps you to the next extension and you can just pick up the handset and set it back down to end programming.

Carl

The quick call to your Panasonic dealer would have answered your question. The 76xx series is, indeed, digital. However, it is not an IP phone, nor does it communicate down an ethernet network.
There is an IP solution to the TDx/NCP system that uses IP phones, soft phones, and a VPN or Etherenet network.

Check with your dealer.

Carl

You log into mailbox 999 and reset the password for that extension.

Carl

Press Program button
Dial **1234
Dial 000
Press SP Phone Button Twice
Dial Hour (00-12)
Press FWD/DND button
Dial Minutes (00-59)
Press FWD/DND button
Press Auto Answer button to select AM or PM
Press Autodial/Store button
Press Hold button
Press Program button

If the voicemal is a Panasonic brand TVA box, go into mailbox 999 and reset the password.

Carl

If you mean timed reminder/wake up, you can't. The one cancels a previous set.

Carl

From any voicemail prompt, dial #6* your ext You will be in the same place as if you had pressed the MESSAGE button or dialed 500 from your desk phone.

Carl

Since a 7640 has no *handset* (it's a DSS console) that's going to be tough to do. However, since it attaches to a 763x phone, the answer is, use the Navigator volume up arrow with the handset held to your ear.

Carl

Line not programmed to ring. Try adding the extension to an ICD group.

On the phone, press PROGRAM the blank button and dial 1+an extension STORE. You can keep pressing and storing numbers. When you finish, press EXIT or pick up the handset and drop it back down.

Carl

The system owner with the access code to mailbox 999 can reset your password. If you lose that one, the dealer can log into the voice mail system and reset MB 999's password.

Carl

The system owner can reset all user passwords from the master mailbox (999).

Carl