20 Most Recent
RC ARF Long EZ .46 Pusher Nitro Gas Radio Remote Control Plane - Page 7 Questions & Answers
Would like to have a
http://www.multiplexusa.com/model-kits/mentor.html
At the Bottom of the page is a link to download the manual you are searching for.
3/10/2011 2:54:21 AM •
RC Toys
•
Answered
on Mar 10, 2011
I have a 9009 RC
check to see if the battery is seated properly stopping it from taking a full charge or working itself loose. you might have knocked a connection out of whack and is not allowing a full charge. if you got it for christmas it should still be under warranty so contact the manufacturer.
1/16/2011 2:13:57 AM •
RC Toys
•
Answered
on Jan 16, 2011
How long to charge a
ni-cad battery is most likley dead as are made to be used and drained over and over 100s of times but the have a short life storage.
11/21/2010 2:55:58 PM •
RC Toys
•
Answered
on Nov 21, 2010
Hi , I bought a
Yes, leave the switch ON when you charge it otherwise it will not take a charge
11/6/2010 6:22:24 AM •
RC Toys
•
Answered
on Nov 06, 2010
Hi i have just bought
Hi there,
If it works at close range , but not at a distance, it could be the power for the Transmitter or the receiver.
The sub frequency ranges could be mismatched:
While the XMIT/RCVR freq's used in electric R/C cars are normally preset at the factory to one of six sub-frequencies subordinate to 27MHz or 49MHz, the much faster petrol powered ones normally use the 72 MHz range.
The difference in the 72's is the crystal pairs can be mixed and matched by the operator. Check on this
Best regards
Mike
8/23/2010 2:30:56 AM •
RC Toys
•
Answered
on Aug 23, 2010
Cant get the transmitter to
Hi
Somewhere on the transmitter is the transmitted frequency. If a hobby grade unit the frequency will start with 72.xxx mhz. If this is a toy store unit the frequency will start will 27.xxxmhz. Each of these bands will be subdivided into channels. At any rate, the receiver must match the frequency on the transmitter.
8/18/2010 9:31:10 PM •
RC Toys
•
Answered
on Aug 18, 2010
MY YIBOO CHINOOK HAS A BROKEN MAIN BLADE HUB.
I found this on xheli.com. Syma S022 big CH-47 chinook.
Looks like the same heli as Yiboo. Lists all spare parts.
Good Luck. Please post results if you order from this site.
I also have the Yiboo CH-47, have not needed parts yet, just got it for xmas from my wife.
3/7/2010 8:49:53 PM •
RC Toys
•
Answered
on Mar 07, 2010
Yiboo AH-64 3D RC Mini Apache Helicopter
Mine worked good for 3 days then died..Top blades wont spin.. It worked really well. The guy at (as seen on TV) shop that sold it to me actually seemed to tell me "Do not buy this!" But I bought it anyway at his word that I cannot bring it back no matter what after 24 hours..spent 90 bucks on this junk and there is NO SOLUTION
2/10/2010 11:48:35 PM •
RC Toys
•
Answered
on Feb 10, 2010
Not finding what you are looking for?