Top 20 New Bright 1 10 RadioControlled Land Rover Questions & Answers

You can change the crystals over in the car & transformer,problem is that they may be soldered into position & would need to be unoldered & new ones soldered in. Can get them of of ebay pretty cheap. Should say what frequancy car is on underneath & on box. Some controllers have a switch & can choose out of 3 frequncies.Hope this helps on deciding to go further.

mcdevito75 here, You should be able to contact New Bright on line or with the paper work that came with the Land Rover.

STU DO YOU HAVE THE DIMENSION OF THE PART IF YOUR NEW BRIGHT TOY 4X4 DO YOU HACE THE ONE PICTURE OF THE PART YOU ARE SEARCHING TO SEE IF I HAVE ONE!

Make sure the batteries are installed correctly and that the connection points are clean and have a tight connection.

Yes it should. See the adverts and repair videos in the link. https://www.google.com/search?q=Does+a+New+Bright+Christmas+Express+1996+engine+smoke ..

Sold on eBay but looks like the bands at missing. Go to Home Depot and buy some -O-rings that fit. 3 or 4 each side should do it. https://www.ebay.com/itm/185618976768 I wonder if these would fit? Ask the internal diameter. https://www.amazon.com/Plarail-Repair-Parts-Rubber-16pcs/dp/B000LXS8IM ....

Might try contacting manufacturer for this vintage item, or contact sellers on eBay to ask to purchase copy of instructions. http://www.newbright.com/support/battery-powered-train-faq/ Example on ebay: https://www.ebay.com/itm/1997-Complete-Mint-Condition-Service-Express-Railway-Radio-Control-G-Train-Set/372854424459?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D20160908110712%26meid%3Dfd6b8137f24247c0ac8811d494b2c37d%26pid%3D100677%26rk%3D3%26rkt%3D30%26sd%3D274112638776%26itm%3D372854424459%26pmt%3D1%26noa%3D0%26pg%3D2386202&_trksid=p2386202.c100677.m4598

The controller and the car must be matched. Sounds like both are matched using the same frequency. Look at the instructions for changing the controller and car to a different frequency Then change one car and controller. try here Technical Documentation New Bright Industrial Co for info

What size batteries does the 1986 D and W R.R Denver express take

How do i get the train to turn on and make noises anbd move

I ned battery charger 19.2 V for m'y Hommer 3

The track layout is simple enough,there are 12 straight peice of tracks and 12 curved tracks. So you can make it one big circle and not use the straight tracks or add 1-6 on each sidewith straight track and you'll have a long oval. Or have 1-4 on each side then add 1-4 after the third curved track of each circlular end to have a big type oval style.Some lites lite up right when you push the power switch on and the remaining lights will work once the train is in motion.

If you take the look at the price in the link
http://www.buzzillions.com/reviews/new-bright-radio-control-hummer-h2-1-6-scale-black-reviews
then you will realise why it does not worth to someone sell only the parts you need since you can buy the whole unit at this prices. So you should think to buy a whole unit and if you love the one you already have you can transfer all the parts you need and have also some spares.

ebay, or hobbyshop, or hobbyzone

I think I'd get one of those chargers that will fit anything- select the right plug and voltage, you're in.

eBay is where I'd check first.

lp

yes just look at the boot sales or flea markets ,find a 9v charger with correct end on ,or visit the local chinese emporium and no b?doubt you will find a charger in their of 9v its a fairly common voltage ,9.6?? well 9v will do it fine ,or even a 12v one but dont leave it connected for any length of time

Hi! Best option is to rip all the electronics off and built it up yourself - no replacementparts for those toys. The other option is to sell the boat to me - I would do option 1 with it, because in Switzerland, it seems to be impossible to get such a boat...!

If the antenna came off of the controller in one day, I would return the whole unit to where you bought it and exchange it for a new unit.

switch pieces on opposite sides, one straight piece on each side of switch piece, then 5 curved pieces each end.

We found a gear that had cracked, and separated from the shaft.

We fixed it with some superglue.

thanks.