probably are warped
machining warped rotors only fixes the problem until they get hot again and they again warp as they are now thinner than before
the problem could be in worn suspension rubbers and ball joints
so have the front end checked out
if it turns out to be rotors , buy quality after market units and quality disc pads
have the abs system also checked out as the system indicates a braking action similar to when the abs is activated
Drain the transmission fluid & remove the filter.
Install a new filter & transmission gasket.
Noticed the amount of fluid coming out, then put in new fluid at that amount.
Open the engine hood.
Remove & get access to the MAP/air flash system, clean it out very well without breaking or bending anything.
A mechanic always checks for compression, spark and fuel pressure first. Then timing and fuel quality. With timed spark, compression and fuel, there should be combustion. Running then becomes a function of the other control systems.
the condensor fan for the a/c is electric and probably has a blown fuse th ecode for a bad ecm (engine control computer ) is p0605 if you don't have that code the computer is likely ok computer failures are rare
Need to get A/C levels checked and might need more freon and go to the auto parts store and have them run an OBD2 scan on your truck. Than go to www.canobd2.com and put your vehicle and code in and see what that code is in reference to.
The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.
Unfortunately, no one knows or is telling. Companies rarely state power in RMS because Peak Power is a much more impressive. 1000 watt amp, 200 watts RMS x 2 channels at 8 ohms. Look for a sticker on the unit.
https://www.google.com/search?q=Xplore+Amp+5553
..
The wiring is bad on the plugs and shorting out, or whatever is on the end of the cable has an issue. Also look along the cable for rodent, cat, dog chewing.
Questions like this need 'make model (what is is) of every item involved. On a vehicle 'year make model' as well.
The bad ground causes the amplifier to go into the protect mode. So, make sure to check the grounding wire and overall connection to figure it out and set back the amplifier to its normal mode.
Feb 15, 2023
