20 Most Recent RIM Blackberry 8310 8320 8330 Curve 8100 8110 8120 8130 Pearl Car Charger / Veh - Page 9 Questions & Answers

Cause:
Some of the boot up file has got corrupted

Resolution:
Re-install the handset software using Desktop Manager

check whether sim card is working in different mobile or not ......if not working replace the simcard with the new ...

contact service center as this is hardware problem

the common line to these keys are cut or disabled from the filter or connector if any..you actually need the circuit diagram of your device to surely fix it..but try this...using an ohmmeter, check if one terminal of these keys are connected to each other..it's either the inner or the outer terminal..take note of the connections of these keys..take note also of which terminal of these keys are connected to a functional one..it's a bit tedious but you will know when you need to bring it to the nearest repair shop..

There is no solution, not possible. The "trust" does not include storing the passcode.

Hi,

On your blackberry, go into contacts.

Then press the blackberry logo button on the keypad to bring up the menu, and select options.

Next select General Options

Then change the "sort by" option to "First Name"

Please rate this solution if it helps. Thanks.

Email the picture.... and then open the email on your blackberry.... that should work if the nokia 6680 has Email capabilities...

go into message menu highlight message press the menu key(next to talk button) should give you several oprtions scroll down to delete the press trackball should prompt DELETE ITEM select delete all done

Dear, you can download the manual in pdf formate from this link

Manual of blackberry 8700c

Best regards.

Try removing the battery, hold the power button for about 10 seconds, reinstall the battery, and power up the phone. This fixed the problem for me on my Curve.

Remove as many parts as you can such as Battery, SIM Card, Flash Card.Don't charge until the unit has totally dried out. Wrap the unit in towel and shake as much water out as possible. Use a hair dryer on low heat to dry out every part possible. Recharge the battery.

Go to profiles, and scroll down to advanced.  Make a new profile and then choose which things you want tone/vibrate/nothing.  Once you name and save your new profile, select it, and youre good to go!

Found this after some deep looking from blackberry itself: Good Luck


A BlackBerry smartphone with tethered modem capabilities can be used as an external modem to connect a computer to the Internet.
Summary of Tasks To set up a tethered modem, complete the following tasks:

1. Install BlackBerry Desktop Software 4.1 or later (one time only).
2. Set up the Internet access point name (APN) (one time only).
3. Configure dial-up networking (one time only).
4. Connect to the Internet using dial-up networking.

Task 1
Install BlackBerry Desktop Software 4.1 or later on your computer.
When you install BlackBerry Desktop Software, the drivers that allow the BlackBerry smartphone to communicate through the Universal Serial Bus (USB) port and virtual communications port are installed. The standard modem, which is used by dial-up networking, is also installed.
Note: If upgrading your BlackBerry Desktop Software from version 4.0 to 4.1, the required virtual communications port and standard modem might be removed during the upgrade process. If this is the case, re-install the BlackBerry Desktop Software 4.1 or later and choose the Repair option to re-install these components.
Task 2
Set up an Internet APN.

1. Click Start > Settings > Control Panel.
2. Double-click Phone and Modem Options.
3. In the Phone and Modem Options window, click the Modems tab.
4. Select Standard Modem and click Properties.
5. Click Change Settings.
6. In the Standard Modem Properties window, click the Advanced tab.
7. In the Extra initialization commands field, type the following: +cgdcont=1,"IP","<your Internet APN>"
   Note: The following is applicable for T-Mobile® customers only:
   The extra initialization command is: +cgdcont=1,"IP","wap.voicestream.com"
   Note: If you do not know your Internet APN, or if you do not have an Internet APN, contact your service provider.
   
8. Click OK.
9. In the Phone and Modem Options window, click OK.

Task 3
To configure dial-up networking, complete the procedure that is appropriate to the operating system you are using:
Windows Vista

1. Click Start.
2. Select Connect To.
3. Click Setup a connection or network.
4. Click Setup a dialup connection.
5. In the Dial-up phone number field type *99#.
6. Type the user name and password provided by your service provider.
7. In the Connection Name field type BlackBerry.
8. Click Dialing Rules.
9. Make sure the profile created in Task 2 has been selected, and then click OK.
10. Select Connect to establish an internet.

Note: For instructions on connecting a computer to the Internet using a BlackBerry smartphone with CDMA as a tethered modem, see KB04664.
Windows XP operating system

1. Click Start > Settings > Network Connections.
2. Double-click New Connection Wizard. The New Connection Wizard opens.
3. Click Next.
4. Select the Connect to the Internet option. Click Next.
5. Select Set up my connection manually. Click Next.
6. Select Connect using a dial-up modem. Click Next.
7. If the Select a Device screen appears, select the Modem - Standard Modem check box. Click Next.
8. In the ISP Name field, type a name for your connection. Click Next.
9. In the Phone number field, type *99#. Click Next.
10. Indicate which users will have access to the connection. Click Next.
11. Type the user name and password provided by your service provider. Click Next.
12. Click Finish.
13. In the Connect window, click Properties.
14. In the Properties window, verify that Modem - Standard Modem appears beneath the Connect using heading, and then click Configure.
15. In the Modem Configuration window, clear the Enable hardware flow control check box and make sure none of the other check boxes are selected. Click OK. In the Properties window, click OK.

Windows 2000 operating system

1. Click Start > Settings > Control Panel.
2. Double-click Network and Dial-up Connections. Note: The following is applicable for T-Mobile customers only:
   Under the networking tab in the properties window for the dial-up connection, clear the Enable LCP Extensions check box, as well as all check boxes beneath the PPP Settings window.
   
3. Double-click Make New Connection. The Network Connection Wizard opens.
4. Click Next.
5. Choose Dial-up to private network. Click Next.
6. In the Phone number field, type *99#. Click Next.
7. Indicate which users will have access to the connection. Click Next.
8. Type a name for your connection. Click Finish.
9. In the Connect window, click Properties.
10. In the Properties window, verify that Modem - Standard Modem is selected, then click Configure.
11. In the Modem Configuration window, clear the Enable hardware flow control check box and make sure none of the other check boxes are selected. Click OK.
12. In the Properties window, click OK.

Task 4
Connect to the Internet using dial-up networking.
Note: During this procedure, do not operate the BlackBerry® Browser or any third-party applications on the BlackBerry smartphone. An active data session might interfere with the modem connection. Also, make sure an ethernet connection is not active at the same time.

1. Connect the BlackBerry smartphone to the computer.
2. Open BlackBerry Desktop Manager.
3. Click Start > Settings > Network Connections > <name of your new connection>.
4. Type the user name and password provided by your service provider.
5. Click Dial.

unless your on a BES server there is no way to bypass the security feature built in to prevent others from cracking your password. the BES server has the ability to send a reset the password and broadcast it to your phone to unlock it. most effective on those down to the last 2 tries.

Call your service provider and tell them that you need to unlock your phone to use it overseas. It works like a charm. It the law that the phone can be unlocked to use with other service providers, but they try to delay you on it. this works and i recieved mines within 48 hrs. you will need your IMEI number that is posted inside the phone.

Good evening!
Removing (or replacing) the trackball on the Blackberry phone is very easy.
Shut off your blackberry phone (I would take out the battery).
Quickly examine the trackball itself on your phone. Use something with a small tip, like a screwdriver (NOT A KNIFE! Could damage the mechanism), and slide it underneath the silver ring around the ball. Gently lift up, might also want to try lifting both sides to help lift it off.
Once off, set aside the silver ring. You should now see the trackball mechanism, to remove it, simply flip the phone over and it should just fall out (can also tap it a few times which helps). The mechanism is simply held in magnetically.
You should now be able to see where the trackball was. You can now take a cotton swab with a small amount of rubbing alcohol and clean around in that area. If you examine, you will see small rollers around the trackball, you can also clean these. 
This is the best way to clean the trackball. If all else fails you can replace the trackball. You can order one off amazon, they are very cheap, ranging from $2-10.  
To put in the trackball, simply reverse the steps. The trackball device only goes in 2 ways, if it simply doesnt fit, turn it. It requires minimal force to put it back in. To put the silver ring back in, just match up the 3 little clips and gently push it back in.
Put the battery back in and give it a test.
Hope this helps!

Returned to vendor and they formated.

Hi, friend. I think you should get one video converter to convert 3gp to MP4 for playing on PC. Maybe this 3GP Converter can help you.