20 Most Recent RIM Blackberry 8310 8320 8330 Curve 8100 8110 8120 8130 Pearl Car Charger / Veh - Page 2 Questions & Answers

If it is application error then follow these steps: Warning: You should not install a version of BlackBerry Device Software that is earlier than the version installed on the BlackBerry smartphone. Doing so could cause the BlackBerry smartphone to malfunction. Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the computer by completing the following steps: Open BlackBerry Desktop Manager. Click Help. Select About Desktop Manager. Click the Device Software tab. Verify that the BlackBerry Device Software displayed is the latest version currently available from the wireless service provider. Warning: The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the following steps: Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Next to start the installation process. Type your BlackBerry smartphone password, if prompted, and click OK. Select the check boxes next to the names of the applications you want to load, and then click Next. Click Advanced, and then select the check boxes beside Erase all application data and Erase all currently installed applications . Click Next. Select the check box next to Do not automatically backup the application data during the loading process (if prompted). Clear the check box next to Backup and restore applications installed wirelessly (if prompted). Click Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager Note: BlackBerry Desktop Manager 4.3 will display the Delete all application data and Delete all currently installed applications check boxes in step 6 of the above procedure. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 and 4.6, perform the following steps: Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Add/Remove Applications. Type your BlackBerry smartphone password and click OK. Select the check boxes next to the names of the applications you want to load. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications. Click OK. Click Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Main Menu to return to BlackBerry Desktop Manager. Note: The Delete all application data and Delete all currently installed applications options are not available when using the Application Loader in BlackBerry Desktop Manager 4.5. A workaround for this issue is to use the Application Loader standalone file by performing the following steps: Open My Computer (or Computer in Windows® Vista?). Navigate to C:\Program Files\Common Files\Research In Motion\AppLoader. Run the Loader.exe file and follow steps 3 through 9 above to complete a clean installation of the BlackBerry Device Software.

Hi,

To correct this, follow the steps outlined below from RIM:

1. If not already installed, download BlackBerry Device Software and BlackBerry Desktop Manager from the wireless service provider web site.

2. Install BlackBerry Desktop Manager and then install the BlackBerry Device Software.

3. Use Application Loader to reload the software on the BlackBerry device.

But, if it is on warranty, it is better you go for a replacement.

Good luck

i need wii fi

Hi,

Let me help you here. If you require a trusted and yet cost effective and affordable code with high quality and good customer support service, then you can unlock your blackberry 8330 from Blackberry unlocking codes with IMEI. I hope this would turn out to be helpful for you :)

If your regular charger is working in the wall, it sounds like the USB cord that you are using with your computer isn't a "charging" USB. I don't think you are having a malfunction with your BB.

Dear Sekobm,

You are facing the problem of locked phone. I would recommend you Blackberry unlocking codes with IMEI to unlock your Blackberry 8110 because they are highly reliable, trusted, and provide CHEAPER rates on unlocking codes. They also have great customer support service. I hope it would help you find the best solution to your problem. Take care and have a nice day :)

ok so what u basically do is just keep the charger in the usb port. then take the battery out then plug it back in. this totally works!

How to Reset a Blackberry


There are three main types of Reset that apply to the Blackberry. These are listed in order below. Instructions for Blackberry Pearl are slightly different - see bottom section of the Tip.

1) Soft Reset - simply press the ALT+RIGHT SHIFT(CAP)+DELETE keys.

This reset stops all applications that are running on the Blackberry and will help if you are having problems connecting the device to computer. This reset will not erase any information from your device.

2) Double Soft Reset - this reset is almost equivalent to a full hard reset. First perform a Soft Reset as outlined in Step 1.

As soon as the screen is no longer black - repeat the steps once again exactly as before.

This takes you to another screen showing an hour glass. Allow the device to reset. This helps if the device has suffered a more serious error. Be aware you may loose some information from your device. A backup is advised prior to proceeding if at all possible.

3) Hard Reset - this is the full blown reset and will fully reset the device to help resolve critical errors with software or hardware. Again back up important information before proceeding if possible.

Note: For RIM models 850, 857, 950, or 957, you must insert the end of a paperclip or similar blunt object into a small recessed hole on the back of the unit and depress the switch inside. The device will reboot and be hard reset.

Other Models: With the device turned on - remove the battery for 30 seconds or more. Now replace the battery. The device will reboot and be hard reset.

Blackberry Pearl: To reset to factory defaults enter 'Options' from the main menu. Scroll to Security Options and press the trackball. Choose 'General Settings'.

Press the left soft key, then scroll to "Wipe Handheld" with the trackball and press the trackball. To initiate the factory reset, your phones security code may be required in order for the process to complete. Your phone will now be restored to its original settings on leaving the factory.

A hard reset can be achieved with the Pearl in the same way as outlined at Step 3 by removing the battery.

Be aware that resets such as these may erase data, such as contacts, ring tones, pictures, text messages and stored Internet files and emails. Make sure to back up important information beforehand if at all possible. You can obtain software to back up the device to your computer directly from Blackberry Below.


software112.com/products/blackberry-desktop-software.html


Hope this Tip helps. If so please do leave a vote for the solution.

Thanks.

You should just return it. It was defective and they knew it, that is why they instructed you to buy a new battery. That is an attempt to stall you and make your return harder. Do not tell them about the new battery and just tell them you no longer wish to keep the unit as that is not what you paid for. If they give you any static, file a claim against them.

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Hello.
There are about 283 pages in the Blackberry Curve 8310 user guide.
Hope it helps.

It's a clear and fully detailed guide on how to unlock any BlackBerry :

1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard (if your BlackBerry have touchscreen)
7. Type MEPD ( you will not be able to see what you are typing )
8. Type MEP2 or MEP4 ( you will not be able to see what you are typing )
9. Now the phone will prompt you to enter the mep code
10. if you not already have the code, then i suggest BlackBerryMEP.COM to get it from .
11. Enter the mep code ( you should see "code accepted" )
12. Restart your BlackBerry .

All done.

SOURCE : BLACKBERRYMEP.COM

Hi,
It is very easy to unlock Blackberry Pearl 8120 .i did find a third party.i had unlocked mine.it work perfectly.This third may help you find the cheapest solution.
Hope this help.

It's a guide on how to unlock your BlackBerry :

1. Insert any sim card

2. Turn off all of the wireless connections

3. Go to Options

4. Select Advanced Options

5. Select SIM Card

6. Hit menu select show keyboard (if your BlackBerry have touchscreen)

7. Type MEPD or MEPPD ( you will not be able to see what you are typing )

8. Type MEP2 or MEPP2 ( you will not be able to see what you are typing )

9. Now the phone will prompt you to enter network mep code

10. Go to BlackBerryMEP.COM and get your Unlock Code .

11. Enter the unlock code ( you should see "code accepted" )

12. Restart your BlackBerry .



All done.

Hello Anwar,
You have to pair both devices first.
turn on Bluetooth on both devices
look for Bluetooth setup>pair devices>search for devices (may not be exactly but somewhat close)
in the search list look for you Nokia device
select it and enter a pass-code (on both devices)
now the devices are paired
then, on your Blackberry, go to Media>receive a file
send the file from your nokia and accept the request on your blackberry
your BB will ask where you want to save the file, select the folder and you're done!

i want to send a link of real player for my black berry 8900 pl tell me how i can send via internet plz

You may need to restore the phones firmware with the Desktop Manager software on your Mac or PC.

Hi, you need the desktop manager, and you need to download the current software version for that device, its going to wipe everything out on the device, but you will get the device to work. after you download the the software, you need to run it on your PC, and then use the APP loader on the desktop manager to install it to the device.

Step #1 Before starting make sure that BlackBerry Desktop Software is installed on the computer.
Step#2 Make sure that you have installed updated device software installed in your PC.
Step#3 Users can perform a full or selective backup of the data using the Backup and Restore tool in BlackBerry Desktop Manager by completing the following steps: Connect the BlackBerry device to the computer running BlackBerry Desktop Manager. Open BlackBerry Desktop Manager. Double-click Backup and Restore. Select Backup to perform a full backup or select Advanced to perform a backup of specific databases. Choose a location to save the backup file, then click Save.
Step#4 To perform a clean install of the BlackBerry Device Software, perform the following steps: Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click the Application Loader icon. Click Next to start the installation process. Type your BlackBerry smartphone password, if prompted, and click OK. Click the check boxes next to the names of the applications you want to load, and then click Next. Click Advanced, and then click the check box beside Erase all currently installed applications. Click Next. Click the check box next to Do not automatically backup the application data during the loading process. Clear the box next to Backup and restore applications installed wirelessly. Click Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager.

Hello

You have to unlock that BB first
This unlock code provider generate full LEGAL unlock code direct from Blackberry server which wont void your warranty, & generate code based on your IMEI, means individual code for every blackberry set.
After unlocking from this provider's code your blackberry not only work with any network, you can use your in any part of world with any network including your browser & MMS picture messaging to work, yes with just one time entering code from your keypad.
They unlock from network who locked your blackberry like Verizon
This site will help you a lot & good email & 24/7 phone support
http://blackberryimeiunlockcodes.com/

Depends on what you mean unlock. The 8830 is a cdma and gsm phone. You can flash the Verizon CDMA part of the phone to any other Cdma carrier or you can unlock the the phone with a special code. This i can generate but that would cost you. You will not be bale to find a unlock for free or be able to flash the device over to another carrier without paying.

www.MobileUnlockers.Com