20 Most Recent Woods Outdoor Lighting Timer - Page 2 Questions & Answers

1) Copy following link to identify timer, and select replacement if needed.http://waterheatertimer.org/Woods-timers-and-manuals.html#20012) There is no reset button on this type of timer.Nor is there a repair manual for $16 timers.Generally people buy another timer since the timing chips and parts are delicate, easily damaged by power surge, and often quit working before 1 year warranty expires, and usually last a few years before no longer functioning. The photoeye sensor is often a failure point.3) Check outlet for 80% rated voltage.Check timer on different outlet.Use circuit analyzer and test outlet for correct polarity and grounding.Test and replace GFCI outlets as needed. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

It appears this device is rate 10 amps at 230 volts = 2300 watts.Use at least #14 wire and 15 amp breaker.Connect wire at connection point on light.Unit appears to have a transformer, and might make humming sound.There is override located somewhere on unit. Possibly as a button on the motion sensorIf infrared motion detector requires separate wiring connection, then use following wiring illustration:http://waterheatertimer.org/images/How-to-wire-motion-sensor-230V.jpgMotion sensor will probably have 2 settings.1st setting for sensitivity, so it will not activate when cat walks up driveway.2nd setting for time duration, selectable from 30 seconds to 7 minutesML FL09SBK IP44 36W Fluorescent PIR Floodlight c/w Lamp IP44 Low Energy Floodlight c/w PIR & Override. Black finish. T4 twist and lock lampholder. 36 Watt 6500k T4 spiral compact fluorescent lamp included. (replacement lamp - product code FL09L). Electrical termination via 10 Amp connector block within secure enclosure c/w cord grip. PIR detection range of 12 meters at 2 meter height from ground. Detection arch of 160 degrees. Time range 30 seconds to 7 minutes. Manual override. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

N1506 is 2-button timer.N1502 is 1-button timerCopy following link to identify both timers and download possible manualhttp://waterheatertimer.org/Woods-timers-and-manuals.html#N1502 If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

That sounds like the Woods 17321 Dusk-to-Dawn yard stake
Product image:
http://www.amazon.com/Woods-17321-Outdoor-3-Outlets-6-Foot/dp/B000BHN4H8

Manual
http://waterheatertimer.org/pdf/Woods-17321.pdf

If this is not your timer, check following page:
http://waterheatertimer.org/Woods-timers-and-manuals.html

Instructions:
Yard stake control outlets, and turns ON automatically at Dusk
Rotate dial to set options:
Rotate to OFF > outlets OFF
Rotate to ON > outlets ON
Rotate to Dusk-dawn > outlets on at dusk and off at dawn
Rotate to 2 4 6 8 > outlets on at dusk and off 2 4 6 8 hours later

Timer is not identified:Copy following links to help identify and set timers:http://waterheatertimer.org/How-to-set-timers.htmlhttp://waterheatertimer.org/Woods-timers-and-manuals.html If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Timer is not identified. Problem is not clear.
Add a comment with clear description of product, and say what you have done to set timer.
What do you plug-in to make lights work?

Question is posted under Woods dawn-dusk timer that turns ON automatically at dusk, and then turns OFF 2 4 6 or 8 hours later:
Many different timer-brands work in same manner.
http://waterheatertimer.org/Woods-timers-and-manuals.html#2001

You can get the manual on the link below.

http://waterheatertimer.org/pdf/Woods-59403.pdf

There are two different TM-104 timers that show in web search.
1) Buffalo TM-104 sports timer
I don't have information on Buffalo TM104, or a manual
2) Westek TM104 208 to 277-Volt 4HP timer is sold by Amazon:
http://www.amazon.com/Westek-TM104-277-Volt-Hardwire-Mechanical/dp/B002YGS6TU
I don't have a manual for Westek TM104 but can help you decipher your manual.
Also you can scan your manual into pdf format, post manual on your website for free, and then add a comment to this thread so other can enjoy your generosity.

There is one answer on fixya that says E227659 timer is Woods 59403
http://www.fixya.com/support/t6189563-need_instructions
Open following link to identify Woods timers.
http://waterheatertimer.org/Woods-timers-and-manuals.html#6-24

Add a comment with more information about your timer, for example brand and appearance so fixya can narrow down correct answer for do-it-yourselfers seeking free information.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

It's called a light flasher button.
I haven't seen those in stores since early 80s when I worked hardware.

NSFF shows one:
http://www.nfss.com/fbflbu60wma1.html
Amazon:
http://www.amazon.com/COOPER-WIRING-DEVICES-BP1008-Flasher/dp/B000BOAFVY/ref=sr_1_1?ie=UTF8&qid=1296875233&sr=8-1
Amazon:
http://www.amazon.com/Button-Flasher/dp/B000XPY3C8/ref=sr_1_3?ie=UTF8&qid=1296875233&sr=8-3

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

je me souviens pas comment utiliser

Removing event from programming is dependent on brand and model number of timer.
Identify timer and then add a comment.
Some timers are reset by unplugging them. Some timers have a reset button.
Each timer is different.

On Utilitec 0192773, the manual says to press PROG button to find setting, and then press RESUME button.
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html

On ST01C timer, press MODE until screen displays PGM, then press ON/OFF to find setting, then press + until program displays, press ON/OFF and then press + until SKIP is displayed.
http://waterheatertimer.org/ST01C-program.html

Use following links to help identify your timer:
http://waterheatertimer.org/GE-timers-and-manuals.html
http://waterheatertimer.org/Woods-timers-and-manuals.html
http://waterheatertimer.org/UPM-timers-and-manuals.html

If you do not want to identify your timer and add a comment for further free help, then take advantage of fixya phone support.
For a price, fixya expert reads steps from the manual while you program the timer.

You posted under Woods outdoor timer:
See this timer and other similar types to identify your timer for sure
http://waterheatertimer.org/Woods-timers-and-manuals.html#2001
If this is not your timer, look at other timers on the page and then add a comment, and I will post instructions for another timer.

Generally this type of timer each set the same way:
Instructions:
Timer tuns ON automatically at dusk
Use dial to set 4 possible options:
Set dial to Off , the timer is always OFF
Set dial to ON, the timer is always ON
Set dial to Dusk-Dawn, the timer is ON at dusk, OFF at dawn
Set dial to 2,4,6,8 hours, the timer is ON at dusk, lights OFF 2,4,6,8 hours later

You can also take advantage of fixya phone support.
Fixya expert will walk you through the steps for a price.

I am not familiar with Woods 9309.

You posted next to a timer that looks like the following:
http://waterheatertimer.org/Woods-timers-and-manuals.html#2001
If this is not your timer, then add a comment with clear description of your timer.

There are many timers on the market.
Page link above shows many of today's timers along with the manuals.

If you don't want to look through page above or add a comment describing your timer, then you can also take advantage of fixya phone support.
Fixya expert will ask you what your timer looks like and then walk you through the steps for a price.