20 Most Recent DigiWeigh 100 X 0.01 Gram Digital Jewelry Pocket Scale - Page 5 Questions & Answers

Reset it!

Turn off the scale. Press and hold the MODE button and turn the scale on. Release the MODE button you will see the scale's internal count.
Press and hold the TARE button then press (don't hold) the MODE button you will see the full capacity is changing. Keep pressing the MODE while holding the TARE button until you see 100.00 on the screen. The reset is completed. You may need to recalibrate the scale after the reset.

What is your question??

have you tried removing the battery then insert it again? if not please do try. thanks.

Hi,

First make sure there is no possibility of interference. Make sure cellular and cordless phones are either off or far away. Things like electrical motors, wifi, and bluetooth can also cause interference. It really isn't that big of a deal, but you are calibrating your scale to make it more accurate so you might as well give it the best chance for optimum accuracy.

Place the scale on a firm, level surface.
While it is off, press and hold both the mode and the tare* keys at the same time and press the On/Off key. Release the keys and observe the display cycle through a series of numbers.

Press the mode key once and observe the display "CAL 0" "100.00" then similar numbers as before. This step calibrates the scale without any weight on the platform. Next place your calibration weights on the scale. (In this case they are two 50gram bars) Press the mode key once more, it will either say pass or fail for your re-calibration.

*Some scales use the same method without pressing the TARE button.

The solution for many other scales is very much the same as this. It can help to fix or troubleshoot errors like F--H, error, and many others.

If it shows 64018 that means the loadcells are overloaded and it need repaired.

One of the Solutions Posted on Fixya by a User is :-

I thought the scale was just completely broken, I was able to fix by doing the following.

1. turn unit off
2. hold down the on/off/tare AND the MODE button.
3. The unit will come up with a bunch of numbers on the screen. Release the buttons
4. Press MODE once, you will see "100" flash on the screen. if you don't press the button a second time.
5. place 100g of tare weights on the scale.
6. Press MODE button again. After this my scale said PASSED and shut off.
7. remove tare weights and turn device on. It should now register properly.

In my case. the scale was misregistering the 50g weights as 75. I shut it off. I pulled up ever so slightly on the scale plate on the hinge side of the plate are repeated steps 1-7.

I have no idea why they don't have a 3 part calibration on these.

It is working like a charm now!



Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

It should be self checking and need no 'adjustment'.