20 Most Recent Uniden Cordless Phone - Page 6 Questions & Answers

If there is a solution you will need to contact Uniden customer service to find out.

New telephone company procedures in many areas now require that all 10 digits be dialed even for local calls -- Area Code + Exchange + Number Perhaps your Directory listings do not include the area code ? Good luck!

If it's the model 27851 it's as easy as setting each handset in the base (the answering machine part) for 20 seconds. That's it! Hope this helps.

I have not seen this in a long time. 'Way back in the 1970's a similar problem would occur when the telephone company accidently reversed the 'tip and ring' wires. This was only a problem with the then-new "push button" (tone) dialing, the standad rotary dials worked fine. The fix was to reverse the red & green station wires in the "B-block" (on the baseboard) to undo the central office goof. Maybe it still happens? Try reversing the red & green wires in the modular socket you are plugging the base ('main unit') into. Good luck! ------------

To replace the default or current greeting with a personal one ( Uniden model D1680 & similar ): 1. press [MENU] 2. scroll to "Ans. Setup" then press [select] 3. scroll to "Record Greeting" then press [select] 4. It will display & tell you aloud to press [select] 5. Speak Clearly your desired greeting, then press [select] 6. press [END] to conclude & exit Good luck! ------------

To replace the default greeting with a personal one ( Uniden model D1680 & similar ): 1. press [MENU] 2. scroll to "Ans. Setup" then press [select] 3. scroll to "Record Greeting" then press [select] 4. It will display & tell you aloud to press [select] 5. Speak Clearly your desired greeting, then press [select] 6. press [END] to conclude & exit Good luck! ------------

That might be the Voice Mail Waiting Indicator which works with the telephone service provider's 'VoiceMail' feature. On the D1680 and similar handsets, it can be reset by: 1. press [menu] 2. scroll down to "Global Setup", press [select] 3. scroll down to "VMWI Reset", press [select] 4. scroll down from "No" to "Yes", press [select] 5. handset will chirp, blinking lamp goes out, 6. press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual if needed. Good luck! --------------

The easiest way out of "Silent Mode Always On" is to just turn [ OFF ] the Answering Machine, then turn it back [on]. Use the [ANS on/off] button on the base, do not unplug anything. Good luck! --------------

The model number for your cordless phone is shown on a small sticker underneath the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual which describes all of the many features of the Answering Machine System . Good luck! -----------

The following works for the Uniden models D1680, D1481, and similar phones: press [menu] scroll to "Ans. Setup" press [select] scroll to "Ring Time" press [select] scroll to the ring-count you want to use ( 2, 4, 6 rings or 'Toll Saver' ) press [select] (chirp) press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual. Good luck!

The following works for the Uniden models D1680, D1481, and similar phones: press [menu] scroll to "Ans. Setup" press [select] scroll to "Ring Time" press [select] scroll to the ring-count you want to use ( 2, 4, 6 rings or 'Toll Saver' ) press [select] (chirp) press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual. Good luck!

Hi,

Please delete the messages in mail box.The mail box is full so that it cannot store anymore messages it mail box.

Delete the messages and you can use this service again

Thanx

The easiest way out of "Silent Mode Always On" is to just turn [ OFF ] the Answering Machine, then turn it back [on]. Use the [ANS on/off] button on the base, do not unplug anything. Good luck!

To obtain a replacement owners' manual, you'll need the precise model number of your phone: this is found on a small sticker underneath the battery inside the handset. Take this model number (eg, D1484) to www.manualslib.com and you can download a free copy of the manual. Good luck!

That might be the Voice Mail Warning Indicator. On the D1680 and similar handsets, it is reset by: 1. press [menu] 2. scroll down to "Global Setup", press [select] 3. scroll down to "VMWI Reset", press [select] 4. scroll down from "No" to "Yes", press [select] 5. handset will chirp, blinking lamp goes out, 6. press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual. Good luck!

The easiest way out of "Silent Mode" is to just turn [ OFF ] the Answering Machine, then turn it back [on]. Use the [ANS on/off] button on the base, do not unplug anything. Good luck!

That might be the Voice Mail Warning Indicator. On the D1680 and similar handsets, it is reset by: 1. press [menu] 2. scroll down to "Global Setup", press [select] 3. scroll down to "VMWI Reset", press [select] 4. scroll down from "No" to "Yes", press [select] 5. handset will chirp, blinking lamp goes out, 6. press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual. Good luck!